gentapes(1)gentapes(1)NAMEgentapes - Produces magnetic tape distribution media
SYNOPSIS
/usr/bin/gentapes [-w | -v] [hostname:] prodID devname
OPTIONS
Writes the product media without verification. Do not use the -w option
with the -v option. Verifies the product media without writing it
first. This assumes that you have already written kit files to the dis‐
tribution media. Do not use the -v option with the -w option.
The -w and -v options are mutually exclusive. If neither is used, the
gentapes utility writes and then verifies the product media.
OPERANDS
The optional hostname: argument is the name of a remote network machine
that contains the kit descriptor database. The gentapes utility
searches the kit descriptor database on the remote machine for the kit
identifier (prodID[TK|MT]) and uses it to create the media. The colon
(:) is a required delimiter for TCP/IP networks, and space is permitted
between the colon and the prodID. For example, if the product code is
OAT100 and you are using the kit descriptor database on node mynode,
use mynode:OAT100 for this option. The mandatory prodID operand is a
kit identifier consisting of the product code and version number speci‐
fied in the CODE and VERS fields of the kit's key file. Refer to the
Guide to Preparing Product Kits for information about the key file.
The mandatory devname operand specifies the device special file name
for a no-rewind tape device such as /dev/ntape/tape0l. The gentapes
utility uses the default tape density for the device and ignores any
suffix specified on the command line.
DESCRIPTION
Use the gentapes utility to produce MT9 or TK50 magnetic tape distribu‐
tion media. The gentapes utility performs the following tasks: Deter‐
mines the media code (TK or MT) for the specified tape device. Appends
the media code to the product code specified on the command line.
Searches the kit descriptor database for the combined product code and
media code. The default kit descriptor database is the /etc/kitcap
file. Copies files and subsets specified in the kit description to the
distribution media. If you specified verification, rewinds and reads
the tape, using the sum utility to verify file transfer accuracy.
Refer to the sum(1) reference page for more information about this
utility.
If you do not use either of the -w or -v options, the gentapes utility
writes and then verifies the product media.
The gentapes utility can produce multivolume tape kits and multiproduct
tape kits. See the kitcap(4) reference page for information on specify‐
ing these features.
RESTRICTIONS
You must have root privileges to run this program. If you use the
optional hostname operand, you must have root privileges to access
files on the remote host.
If you do not use the optional hostname operand, you can access the
files used by the gentapes utility only if you add the local hostname
to the local /.rhosts file, as follows: hostname root.
The -w and -v options are mutually exclusive.
FILES
Device special files for no-rewind tape devices Default kit descriptor
database
SEE ALSO
Commands: gendisk(1), sum(1)
Files: kitcap(4)
Guide to Preparing Product Kits
gentapes(1)