xdr_pmap man page on FreeBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
FreeBSD logo
[printable version]

RPC_SOC(3)		 BSD Library Functions Manual		    RPC_SOC(3)

NAME
     rpc_soc, auth_destroy, authnone_create, authunix_create,
     authunix_create_default, callrpc, clnt_broadcast, clnt_call,
     clnt_control, clnt_create, clnt_destroy, clnt_freeres, clnt_geterr,
     clnt_pcreateerror, clnt_perrno, clnt_perror, clnt_spcreateerror,
     clnt_sperrno, clnt_sperror, clntraw_create, clnttcp_create,
     clntudp_bufcreate, clntudp_create, clntunix_create, get_myaddress,
     pmap_getmaps, pmap_getport, pmap_rmtcall, pmap_set, pmap_unset,
     registerrpc, rpc_createerr, svc_destroy, svc_fds, svc_fdset, svc_getargs,
     svc_getcaller, svc_getreq, svc_getreqset, svc_register, svc_run,
     svc_sendreply, svc_unregister, svcerr_auth, svcerr_decode, svcerr_noproc,
     svcerr_noprog, svcerr_progvers, svcerr_systemerr, svcerr_weakauth,
     svcfd_create, svcunixfd_create, svcraw_create, svcunix_create,
     xdr_accepted_reply, xdr_authunix_parms, xdr_callhdr, xdr_callmsg,
     xdr_opaque_auth, xdr_pmap, xdr_pmaplist, xdr_rejected_reply,
     xdr_replymsg, xprt_register, xprt_unregister — library routines for
     remote procedure calls

LIBRARY
     Standard C Library (libc, -lc)

SYNOPSIS
     #include <rpc/rpc.h>

     See DESCRIPTION for function declarations.

DESCRIPTION
     The svc_*() and clnt_*() functions described in this page are the old,
     TS-RPC interface to the XDR and RPC library, and exist for backward com‐
     patibility.  The new interface is described in the pages referenced from
     rpc(3).

     These routines allow C programs to make procedure calls on other machines
     across the network.  First, the client calls a procedure to send a data
     packet to the server.  Upon receipt of the packet, the server calls a
     dispatch routine to perform the requested service, and then sends back a
     reply.  Finally, the procedure call returns to the client.

     Routines that are used for Secure RPC (DES authentication) are described
     in rpc_secure(3).	Secure RPC can be used only if DES encryption is
     available.

     void
     auth_destroy(AUTH *auth)

	     A macro that destroys the authentication information associated
	     with auth.	 Destruction usually involves deallocation of private
	     data structures.  The use of auth is undefined after calling
	     auth_destroy().

     AUTH *
     authnone_create()

	     Create and return an RPC authentication handle that passes nonus‐
	     able authentication information with each remote procedure call.
	     This is the default authentication used by RPC.

     AUTH *
     authunix_create(char *host, int uid, int gid, int len, int *aup_gids)

	     Create and return an RPC authentication handle that contains UNIX
	     authentication information.  The host argument is the name of the
	     machine on which the information was created; uid is the user's
	     user ID; gid is the user's current group ID; len and aup_gids
	     refer to a counted array of groups to which the user belongs.  It
	     is easy to impersonate a user.

     AUTH *
     authunix_create_default()

	     Calls authunix_create() with the appropriate arguments.

     int callrpc(char *host, u_long prognum, u_long versnum, u_long procnum,
	     xdrproc_t inproc, void *in, xdrproc_t outproc, void *out)

	     Call the remote procedure associated with prognum, versnum, and
	     procnum on the machine host.  The in argument is the address of
	     the procedure's argument(s), and out is the address of where to
	     place the result(s); inproc is used to encode the procedure's
	     arguments, and outproc is used to decode the procedure's results.
	     This routine returns zero if it succeeds, or the value of enum
	     clnt_stat cast to an integer if it fails.	The routine
	     clnt_perrno() is handy for translating failure statuses into mes‐
	     sages.

	     Warning: calling remote procedures with this routine uses UDP/IP
	     as a transport; see clntudp_create() for restrictions.  You do
	     not have control of timeouts or authentication using this rou‐
	     tine.

     enum clnt_stat
     clnt_broadcast(u_long prognum, u_long versnum, u_long procnum,
	     xdrproc_t inproc, char *in, xdrproc_t outproc, char *out,
	     bool_t (*eachresult)(caddr_t, struct sockaddr_in *))

	     Like callrpc(), except the call message is broadcast to all
	     locally connected broadcast nets.	Each time it receives a
	     response, this routine calls eachresult(), whose form is:

		   bool_t eachresult(caddr_t out, struct sockaddr_in *addr)

	     where out is the same as out passed to clnt_broadcast(), except
	     that the remote procedure's output is decoded there; addr points
	     to the address of the machine that sent the results.  If
	     eachresult() returns zero, clnt_broadcast() waits for more
	     replies; otherwise it returns with appropriate status.

	     Warning: broadcast sockets are limited in size to the maximum
	     transfer unit of the data link.  For ethernet, this value is 1500
	     bytes.

     enum clnt_stat
     clnt_call(CLIENT *clnt, u_long procnum, xdrproc_t inproc, char *in,
	     xdrproc_t outproc, char *out, struct timeval tout)

	     A macro that calls the remote procedure procnum associated with
	     the client handle, clnt, which is obtained with an RPC client
	     creation routine such as clnt_create().  The in argument is the
	     address of the procedure's argument(s), and out is the address of
	     where to place the result(s); inproc is used to encode the proce‐
	     dure's arguments, and outproc is used to decode the procedure's
	     results; tout is the time allowed for results to come back.

     void clnt_destroy(CLIENT *clnt)

	     A macro that destroys the client's RPC handle.  Destruction usu‐
	     ally involves deallocation of private data structures, including
	     clnt itself.  Use of clnt is undefined after calling
	     clnt_destroy().  If the RPC library opened the associated socket,
	     it will close it also.  Otherwise, the socket remains open.

     CLIENT *
     clnt_create(char *host, u_long prog, u_long vers, char *proto)

	     Generic client creation routine.  The host argument identifies
	     the name of the remote host where the server is located.  The
	     proto argument indicates which kind of transport protocol to use.
	     The currently supported values for this field are "udp" and
	     "tcp".  Default timeouts are set, but can be modified using
	     clnt_control().

	     Warning: Using UDP has its shortcomings.  Since UDP-based RPC
	     messages can only hold up to 8 Kbytes of encoded data, this
	     transport cannot be used for procedures that take large arguments
	     or return huge results.

     bool_t
     clnt_control(CLIENT *cl, u_int req, char *info)

	     A macro used to change or retrieve various information about a
	     client object.  The req argument indicates the type of operation,
	     and info is a pointer to the information.	For both UDP and TCP,
	     the supported values of req and their argument types and what
	     they do are:

	     CLSET_TIMEOUT	    struct timeval	  set total timeout
	     CLGET_TIMEOUT	    struct timeval	  get total timeout

	     Note: if you set the timeout using clnt_control(), the timeout
	     argument passed to clnt_call() will be ignored in all future
	     calls.

	     CLGET_SERVER_ADDR	    struct sockaddr_in	  get server's address

	     The following operations are valid for UDP only:

	     CLSET_RETRY_TIMEOUT    struct timeval	  set the retry
							  timeout
	     CLGET_RETRY_TIMEOUT    struct timeval	  get the retry
							  timeout

	     The retry timeout is the time that UDP RPC waits for the server
	     to reply before retransmitting the request.

     bool_t clnt_freeres(CLIENT *clnt, xdrproc_t outproc, char *out)

	     A macro that frees any data allocated by the RPC/XDR system when
	     it decoded the results of an RPC call.  The out argument is the
	     address of the results, and outproc is the XDR routine describing
	     the results.  This routine returns one if the results were suc‐
	     cessfully freed, and zero otherwise.

     void
     clnt_geterr(CLIENT *clnt, struct rpc_err *errp)

	     A macro that copies the error structure out of the client handle
	     to the structure at address errp.

     void
     clnt_pcreateerror(char *s)

	     prints a message to standard error indicating why a client RPC
	     handle could not be created.  The message is prepended with
	     string s and a colon.  A newline is appended at the end of the
	     message.  Used when a clnt_create(), clntraw_create(),
	     clnttcp_create(), or clntudp_create() call fails.

     void
     clnt_perrno(enum clnt_stat stat)

	     Print a message to standard error corresponding to the condition
	     indicated by stat.	 A newline is appended at the end of the mes‐
	     sage.  Used after callrpc().

     void clnt_perror(CLIENT *clnt, char *s)

	     Print a message to standard error indicating why an RPC call
	     failed; clnt is the handle used to do the call.  The message is
	     prepended with string s and a colon.  A newline is appended at
	     the end of the message.  Used after clnt_call().

     char *
     clnt_spcreateerror(char *s)

	     Like clnt_pcreateerror(), except that it returns a string instead
	     of printing to the standard error.

	     Bugs: returns pointer to static data that is overwritten on each
	     call.

     char *
     clnt_sperrno(enum clnt_stat stat)

	     Take the same arguments as clnt_perrno(), but instead of sending
	     a message to the standard error indicating why an RPC call
	     failed, return a pointer to a string which contains the message.

	     The clnt_sperrno() function is used instead of clnt_perrno() if
	     the program does not have a standard error (as a program running
	     as a server quite likely does not), or if the programmer does not
	     want the message to be output with printf(), or if a message for‐
	     mat different from that supported by clnt_perrno() is to be used.

	     Note: unlike clnt_sperror() and clnt_spcreateerror(),
	     clnt_sperrno() returns pointer to static data, but the result
	     will not get overwritten on each call.

     char *
     clnt_sperror(CLIENT *rpch, char *s)

	     Like clnt_perror(), except that (like clnt_sperrno()) it returns
	     a string instead of printing to standard error.

	     Bugs: returns pointer to static data that is overwritten on each
	     call.

     CLIENT *
     clntraw_create(u_long prognum, u_long versnum)

	     This routine creates a toy RPC client for the remote program
	     prognum, version versnum.	The transport used to pass messages to
	     the service is actually a buffer within the process's address
	     space, so the corresponding RPC server should live in the same
	     address space; see svcraw_create().  This allows simulation of
	     RPC and acquisition of RPC overheads, such as round trip times,
	     without any kernel interference.  This routine returns NULL if it
	     fails.

     CLIENT *
     clnttcp_create(struct sockaddr_in *addr, u_long prognum, u_long versnum,
	     int *sockp, u_int sendsz, u_int recvsz)

	     This routine creates an RPC client for the remote program
	     prognum, version versnum; the client uses TCP/IP as a transport.
	     The remote program is located at Internet address addr.  If
	     addr->sin_port is zero, then it is set to the actual port that
	     the remote program is listening on (the remote rpcbind(8) service
	     is consulted for this information).  The sockp argument is a
	     socket; if it is RPC_ANYSOCK, then this routine opens a new one
	     and sets sockp.  Since TCP-based RPC uses buffered I/O, the user
	     may specify the size of the send and receive buffers with the
	     sendsz and recvsz arguments; values of zero choose suitable
	     defaults.	This routine returns NULL if it fails.

     CLIENT *
     clntudp_create(struct sockaddr_in *addr, u_long prognum, u_long versnum,
	     struct timeval wait, int *sockp)

	     This routine creates an RPC client for the remote program
	     prognum, version versnum; the client uses UDP/IP as a transport.
	     The remote program is located at Internet address addr.  If
	     addr->sin_port is zero, then it is set to actual port that the
	     remote program is listening on (the remote rpcbind(8) service is
	     consulted for this information).  The sockp argument is a socket;
	     if it is RPC_ANYSOCK, then this routine opens a new one and sets
	     sockp.  The UDP transport resends the call message in intervals
	     of wait time until a response is received or until the call times
	     out.  The total time for the call to time out is specified by
	     clnt_call().

	     Warning: since UDP-based RPC messages can only hold up to 8
	     Kbytes of encoded data, this transport cannot be used for proce‐
	     dures that take large arguments or return huge results.

     CLIENT *
     clntudp_bufcreate(struct sockaddr_in *addr, u_long prognum,
	     u_long versnum, struct timeval wait, int *sockp,
	     unsigned int sendsize, unsigned int recosize)

	     This routine creates an RPC client for the remote program
	     prognum, on versnum; the client uses UDP/IP as a transport.  The
	     remote program is located at Internet address addr.  If
	     addr->sin_port is zero, then it is set to actual port that the
	     remote program is listening on (the remote rpcbind(8) service is
	     consulted for this information).  The sockp argument is a socket;
	     if it is RPC_ANYSOCK, then this routine opens a new one and sets
	     sockp.  The UDP transport resends the call message in intervals
	     of wait time until a response is received or until the call times
	     out.  The total time for the call to time out is specified by
	     clnt_call().

	     This allows the user to specify the maximum packet size for send‐
	     ing and receiving UDP-based RPC messages.

     CLIENT *
     clntunix_create(struct sockaddr_un *raddr, u_long prognum,
	     u_long versnum, int *sockp, u_int sendsz, u_int recvsz)

	     This routine creates an RPC client for the local program prognum,
	     version versnum; the client uses UNIX-domain sockets as a trans‐
	     port.  The local program is located at the *raddr.	 The sockp
	     argument is a socket; if it is RPC_ANYSOCK, then this routine
	     opens a new one and sets sockp.  Since UNIX-based RPC uses
	     buffered I/O, the user may specify the size of the send and
	     receive buffers with the sendsz and recvsz arguments; values of
	     zero choose suitable defaults.  This routine returns NULL if it
	     fails.

     int
     get_myaddress(struct sockaddr_in *addr)

	     Stuff the machine's IP address into addr, without consulting the
	     library routines that deal with /etc/hosts.  The port number is
	     always set to htons(PMAPPORT).  Returns zero on success, non-zero
	     on failure.

     struct pmaplist *
     pmap_getmaps(struct sockaddr_in *addr)

	     A user interface to the rpcbind(8) service, which returns a list
	     of the current RPC program-to-port mappings on the host located
	     at IP address addr.  This routine can return NULL.	 The command
	     “rpcinfo -p” uses this routine.

     u_short
     pmap_getport(struct sockaddr_in *addr, u_long prognum, u_long versnum,
	     u_long protocol)

	     A user interface to the rpcbind(8) service, which returns the
	     port number on which waits a service that supports program number
	     prognum, version versnum, and speaks the transport protocol asso‐
	     ciated with protocol.  The value of protocol is most likely
	     IPPROTO_UDP or IPPROTO_TCP.  A return value of zero means that
	     the mapping does not exist or that the RPC system failed to con‐
	     tact the remote rpcbind(8) service.  In the latter case, the
	     global variable rpc_createerr contains the RPC status.

     enum clnt_stat
     pmap_rmtcall(struct sockaddr_in *addr, u_long prognum, u_long versnum,
	     u_long procnum, xdrproc_t inproc, char *in, xdrproc_t outproc,
	     char *out, struct timeval tout, u_long *portp)

	     A user interface to the rpcbind(8) service, which instructs
	     rpcbind(8) on the host at IP address addr to make an RPC call on
	     your behalf to a procedure on that host.  The portp argument will
	     be modified to the program's port number if the procedure suc‐
	     ceeds.  The definitions of other arguments are discussed in
	     callrpc() and clnt_call().	 This procedure should be used for a
	     “ping” and nothing else.  See also clnt_broadcast().

     bool_t pmap_set(u_long prognum, u_long versnum, u_long protocol, u_short
	     port)

	     A user interface to the rpcbind(8) service, which establishes a
	     mapping between the triple (prognum, versnum, protocol) and port
	     on the machine's rpcbind(8) service.  The value of protocol is
	     most likely IPPROTO_UDP or IPPROTO_TCP.  This routine returns one
	     if it succeeds, zero otherwise.  Automatically done by
	     svc_register().

     bool_t pmap_unset(u_long prognum, u_long versnum)

	     A user interface to the rpcbind(8) service, which destroys all
	     mapping between the triple (prognum, versnum, *) and ports on the
	     machine's rpcbind(8) service.  This routine returns one if it
	     succeeds, zero otherwise.

     bool_t registerrpc(u_long prognum, u_long versnum, u_long procnum,
	     char *(*procname)(void), xdrproc_t inproc, xdrproc_t outproc)

	     Register procedure procname with the RPC service package.	If a
	     request arrives for program prognum, version versnum, and proce‐
	     dure procnum, procname is called with a pointer to its argu‐
	     ment(s); progname should return a pointer to its static
	     result(s); inproc is used to decode the arguments while outproc
	     is used to encode the results.  This routine returns zero if the
	     registration succeeded, -1 otherwise.

	     Warning: remote procedures registered in this form are accessed
	     using the UDP/IP transport; see svcudp_create() for restrictions.

     struct rpc_createerr rpc_createerr;

	     A global variable whose value is set by any RPC client creation
	     routine that does not succeed.  Use the routine
	     clnt_pcreateerror() to print the reason why.

     bool_t svc_destroy(SVCXPRT * xprt)

	     A macro that destroys the RPC service transport handle, xprt.
	     Destruction usually involves deallocation of private data struc‐
	     tures, including xprt itself.  Use of xprt is undefined after
	     calling this routine.

     fd_set svc_fdset;

	     A global variable reflecting the RPC service side's read file
	     descriptor bit mask; it is suitable as a template argument to the
	     select(2) system call.  This is only of interest if a service
	     implementor does not call svc_run(), but rather does his own
	     asynchronous event processing.  This variable is read-only (do
	     not pass its address to select(2)!), yet it may change after
	     calls to svc_getreqset() or any creation routines.	 As well, note
	     that if the process has descriptor limits which are extended
	     beyond FD_SETSIZE, this variable will only be usable for the
	     first FD_SETSIZE descriptors.

     int svc_fds;

	     Similar to svc_fdset, but limited to 32 descriptors.  This inter‐
	     face is obsoleted by svc_fdset.

     bool_t svc_freeargs(SVCXPRT *xprt, xdrproc_t inproc, char *in)

	     A macro that frees any data allocated by the RPC/XDR system when
	     it decoded the arguments to a service procedure using
	     svc_getargs().  This routine returns 1 if the results were suc‐
	     cessfully freed, and zero otherwise.

     bool_t svc_getargs(SVCXPRT *xprt, xdrproc_t inproc, char *in)

	     A macro that decodes the arguments of an RPC request associated
	     with the RPC service transport handle, xprt.  The in argument is
	     the address where the arguments will be placed; inproc is the XDR
	     routine used to decode the arguments.  This routine returns one
	     if decoding succeeds, and zero otherwise.

     struct sockaddr_in *
     svc_getcaller(SVCXPRT *xprt)

	     The approved way of getting the network address of the caller of
	     a procedure associated with the RPC service transport handle,
	     xprt.

     void svc_getreqset(fd_set *rdfds)

	     This routine is only of interest if a service implementor does
	     not call svc_run(), but instead implements custom asynchronous
	     event processing.	It is called when the select(2) system call
	     has determined that an RPC request has arrived on some RPC
	     socket(s); rdfds is the resultant read file descriptor bit mask.
	     The routine returns when all sockets associated with the value of
	     rdfds have been serviced.

     void svc_getreq(int rdfds)

	     Similar to svc_getreqset(), but limited to 32 descriptors.	 This
	     interface is obsoleted by svc_getreqset().

     bool_t svc_register(SVCXPRT *xprt, u_long prognum, u_long versnum,
	     void (*dispatch)(struct svc_req *, SVCXPRT *), int protocol)

	     Associates prognum and versnum with the service dispatch proce‐
	     dure, dispatch().	If protocol is zero, the service is not regis‐
	     tered with the rpcbind(8) service.	 If protocol is non-zero, then
	     a mapping of the triple (prognum, versnum, protocol) to
	     xprt->xp_port is established with the local rpcbind(8) service
	     (generally protocol is zero, IPPROTO_UDP or IPPROTO_TCP).	The
	     procedure dispatch() has the following form:

		   bool_t dispatch(struct svc_req *request, SVCXPRT *xprt)

	     The svc_register() routine returns one if it succeeds, and zero
	     otherwise.

     svc_run()

	     This routine never returns.  It waits for RPC requests to arrive,
	     and calls the appropriate service procedure using svc_getreq()
	     when one arrives.	This procedure is usually waiting for a
	     select(2) system call to return.

     bool_t svc_sendreply(SVCXPRT *xprt, xdrproc_t outproc, char *out)

	     Called by an RPC service's dispatch routine to send the results
	     of a remote procedure call.  The xprt argument is the request's
	     associated transport handle; outproc is the XDR routine which is
	     used to encode the results; and out is the address of the
	     results.  This routine returns one if it succeeds, zero other‐
	     wise.

     void
     svc_unregister(u_long prognum, u_long versnum)

	     Remove all mapping of the double (prognum, versnum) to dispatch
	     routines, and of the triple (prognum, versnum, *) to port number.

     void
     svcerr_auth(SVCXPRT *xprt, enum auth_stat why)

	     Called by a service dispatch routine that refuses to perform a
	     remote procedure call due to an authentication error.

     void
     svcerr_decode(SVCXPRT *xprt)

	     Called by a service dispatch routine that cannot successfully
	     decode its arguments.  See also svc_getargs().

     void
     svcerr_noproc(SVCXPRT *xprt)

	     Called by a service dispatch routine that does not implement the
	     procedure number that the caller requests.

     void
     svcerr_noprog(SVCXPRT *xprt)

	     Called when the desired program is not registered with the RPC
	     package.  Service implementors usually do not need this routine.

     void
     svcerr_progvers(SVCXPRT *xprt, u_long low_vers, u_long high_vers)

	     Called when the desired version of a program is not registered
	     with the RPC package.  Service implementors usually do not need
	     this routine.

     void
     svcerr_systemerr(SVCXPRT *xprt)

	     Called by a service dispatch routine when it detects a system
	     error not covered by any particular protocol.  For example, if a
	     service can no longer allocate storage, it may call this routine.

     void
     svcerr_weakauth(SVCXPRT *xprt)

	     Called by a service dispatch routine that refuses to perform a
	     remote procedure call due to insufficient authentication argu‐
	     ments.  The routine calls svcerr_auth(xprt, AUTH_TOOWEAK).

     SVCXPRT *
     svcraw_create(void)

	     This routine creates a toy RPC service transport, to which it
	     returns a pointer.	 The transport is really a buffer within the
	     process's address space, so the corresponding RPC client should
	     live in the same address space; see clntraw_create().  This rou‐
	     tine allows simulation of RPC and acquisition of RPC overheads
	     (such as round trip times), without any kernel interference.
	     This routine returns NULL if it fails.

     SVCXPRT *
     svctcp_create(int sock, u_int send_buf_size, u_int recv_buf_size)

	     This routine creates a TCP/IP-based RPC service transport, to
	     which it returns a pointer.  The transport is associated with the
	     socket sock, which may be RPC_ANYSOCK, in which case a new socket
	     is created.  If the socket is not bound to a local TCP port, then
	     this routine binds it to an arbitrary port.  Upon completion,
	     xprt->xp_fd is the transport's socket descriptor, and
	     xprt->xp_port is the transport's port number.  This routine
	     returns NULL if it fails.	Since TCP-based RPC uses buffered I/O,
	     users may specify the size of buffers; values of zero choose
	     suitable defaults.

     SVCXPRT *
     svcunix_create(int sock, u_int send_buf_size, u_int recv_buf_size, char
	     *path)

	     This routine creates a UNIX-based RPC service transport, to which
	     it returns a pointer.  The transport is associated with the
	     socket sock, which may be RPC_ANYSOCK, in which case a new socket
	     is created.  The *path argument is a variable-length file system
	     pathname of at most 104 characters.  This file is not removed
	     when the socket is closed.	 The unlink(2) system call must be
	     used to remove the file.  Upon completion, xprt->xp_fd is the
	     transport's socket descriptor.  This routine returns NULL if it
	     fails.  Since UNIX-based RPC uses buffered I/O, users may specify
	     the size of buffers; values of zero choose suitable defaults.

     SVCXPRT *
     svcunixfd_create(int fd, u_int sendsize, u_int recvsize)

	     Create a service on top of any open descriptor.  The sendsize and
	     recvsize arguments indicate sizes for the send and receive buf‐
	     fers.  If they are zero, a reasonable default is chosen.

     SVCXPRT *
     svcfd_create(int fd, u_int sendsize, u_int recvsize)

	     Create a service on top of any open descriptor.  Typically, this
	     descriptor is a connected socket for a stream protocol such as
	     TCP.  The sendsize and recvsize arguments indicate sizes for the
	     send and receive buffers.	If they are zero, a reasonable default
	     is chosen.

     SVCXPRT *
     svcudp_bufcreate(int sock, u_int sendsize, u_int recvsize)

	     This routine creates a UDP/IP-based RPC service transport, to
	     which it returns a pointer.  The transport is associated with the
	     socket sock, which may be RPC_ANYSOCK, in which case a new socket
	     is created.  If the socket is not bound to a local UDP port, then
	     this routine binds it to an arbitrary port.  Upon completion,
	     xprt->xp_fd is the transport's socket descriptor, and
	     xprt->xp_port is the transport's port number.  This routine
	     returns NULL if it fails.

	     This allows the user to specify the maximum packet size for send‐
	     ing and receiving UDP-based RPC messages.

     bool_t xdr_accepted_reply(XDR *xdrs, struct accepted_reply *ar)

	     Used for encoding RPC reply messages.  This routine is useful for
	     users who wish to generate RPC-style messages without using the
	     RPC package.

     bool_t xdr_authunix_parms(XDR *xdrs, struct authunix_parms *aupp)

	     Used for describing UNIX credentials.  This routine is useful for
	     users who wish to generate these credentials without using the
	     RPC authentication package.

     void
     bool_t xdr_callhdr(XDR *xdrs, struct rpc_msg *chdr)

	     Used for describing RPC call header messages.  This routine is
	     useful for users who wish to generate RPC-style messages without
	     using the RPC package.

     bool_t xdr_callmsg(XDR *xdrs, struct rpc_msg *cmsg)

	     Used for describing RPC call messages.  This routine is useful
	     for users who wish to generate RPC-style messages without using
	     the RPC package.

     bool_t xdr_opaque_auth(XDR *xdrs, struct opaque_auth *ap)

	     Used for describing RPC authentication information messages.
	     This routine is useful for users who wish to generate RPC-style
	     messages without using the RPC package.

     struct pmap;
     bool_t xdr_pmap(XDR *xdrs, struct pmap *regs)

	     Used for describing arguments to various rpcbind(8) procedures,
	     externally.  This routine is useful for users who wish to gener‐
	     ate these arguments without using the pmap_*() interface.

     bool_t xdr_pmaplist(XDR *xdrs, struct pmaplist **rp)

	     Used for describing a list of port mappings, externally.  This
	     routine is useful for users who wish to generate these arguments
	     without using the pmap_*() interface.

     bool_t xdr_rejected_reply(XDR *xdrs, struct rejected_reply *rr)

	     Used for describing RPC reply messages.  This routine is useful
	     for users who wish to generate RPC-style messages without using
	     the RPC package.

     bool_t xdr_replymsg(XDR *xdrs, struct rpc_msg *rmsg)

	     Used for describing RPC reply messages.  This routine is useful
	     for users who wish to generate RPC style messages without using
	     the RPC package.

     void
     xprt_register(SVCXPRT *xprt)

	     After RPC service transport handles are created, they should reg‐
	     ister themselves with the RPC service package.  This routine mod‐
	     ifies the global variable svc_fds.	 Service implementors usually
	     do not need this routine.

     void
     xprt_unregister(SVCXPRT *xprt)

	     Before an RPC service transport handle is destroyed, it should
	     unregister itself with the RPC service package.  This routine
	     modifies the global variable svc_fds.  Service implementors usu‐
	     ally do not need this routine.

SEE ALSO
     rpc_secure(3), xdr(3)

     Remote Procedure Calls: Protocol Specification.

     Remote Procedure Call Programming Guide.

     rpcgen Programming Guide.

     RPC: Remote Procedure Call Protocol Specification, Sun Microsystems,
     Inc., USC-ISI, RFC1050.

BSD			       February 16, 1988			   BSD
[top]

List of man pages available for FreeBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net