WMND(1)WMND(1)NAMEwmnd - WindowMaker network device monitor
SYNOPSISwmnd [ -v | -h | [ -d display ] [ -i interface ] [ -w ] [ -b ] ]
DESCRIPTIONwmnd(1) is a WindowMaker dock application that shows a graph of the
network traffic of the past few minutes, current activity and current
and overall send and receive rates. Additionally it can launch any pro‐
gram in response to mouse clicks.
There are two modes for the max-meter (the one on top of the graph).
Per default it shows the maximum value on the graph. The second mode
shows the maximum value of a historical record since wmnd was started.
You may left click on max-meter to switch modes, right click on max-
meter to hide the max-meter.
OPTIONS-i interface
Start showing the status of network interface interface.
-w Draw the graph in waveform mode (default is inverse waveform
mode). Right clicks cycle through all available modes.
-b Scale the values of the maximum and current rate by factors of
base 2 instead of the default 10-based scaling. (1K equals 1024
in binary mode, but 1000 in decimal mode.)
-h Show summary of options.
-d display
Draw onto X11 display display.
-v Show version of wmnd.
USAGE
Active Interface
You can cycle in realtime through all available active interfaces by
simply left-clicking on the interface name gadget on the upperleft cor‐
ner of wmnd.
The 'lo' interface is an exception, 'lo' ONLY works when invoked from
the commandline (wmnd -i lo), lo was mainly built in for testing pur‐
poses.
Device Name
By default, wmnd show device name in short term of four characters, for
example, the ippp0 will be displayed as ipp0. You can toggle the
device name between short and long by right-click on it.
Graphic Mode
Left-click on the main graphic area to cycle the graphic mode.
Max Meter
Left-click to toggle the history max or screen max, default is screen
max when wmnd is startup. Right-click to hide or display.
Byte/Packet Mode
Left-click on the letter gadgeted on the right-top corner can switch
between the Byte or Packet counter mode. "B" for byte, "p" for packet.
User Script
Click on the bottom rate meter can invoke the user command defined in
resource file .wmndrc.
Dragging WMND
Be sure to drag WMND on it's outer edges, it's a bit picky due to the
large gfx pixmap it keeps. You can also use a keyboard and mouse short‐
cut (perhaps ALT+left-click) in your window manager to drag it around.
FILES
~/.wmndrc User configuration.
The format of this file is:
# WMND configuration file
# middle line in wave mode color
md_color=#71e371
# RX/TX color (can be #xxxxxx, or color name from rgb.txt)
rx_color=#188a86
tx_color=#00fff2
# refresh between status polling (not graph scroll speed)
# numbering in nanoseconds
refresh=50000
# bar graph scroll speed (in seconds) this setting also affectsi
# the rate and max speed displays. the longer the delay, more
# inaccurate these are since the max and rate values are averaged
# across this interval
scroll=1
# buttons for user scripts
# bt1_action=su -c ethereal
# bt2_action=
# bt3_action=
SEE ALSOX(3x), wmaker(1x).
AUTHOR
This manual page was written by Arthur Korn <arthur@korn.ch>.
Dec 8, 2000 WMND(1)