wildmidi.cfg(5) WildMidi Config File wildmidi.cfg(5)NAMEwildmidi.cfg - Config file for libWildMidi
LIBRARY
libWildMidi
DESCRIPTION
Contains the patch configuration for libWildMidi and location of Gravis
Ultrasound compatable patch files.
dir ~/guspats/
source /etc/wildmidi.cfg
bank 0
0 acpiano.pat amp=110 env_time4=300
1 brpiano.pat amp=100
drumset 0
25 snarerol keep=env amp=225 note=60
26 snap note=65
SYNTAX
dir dir-name
Change the search path for config and patch files to dir-name.
This is specific to the current config file and carried to any
included config file unless they have their own dir setting. Any
included file that has its own dir setting does not effect the
dir setting of the current config file.
source include-confg
Include the settings from include-config. Any patch already set
will be over-ridden by the included config file.
bank N The patches following this setting belong to MIDI instrument
bank N.
drumset N
The patches following this setting belong to MIDI drum bank N.
patchno patchfile [amp=volume] [note=miodinte] [keep=loop] [keep=env]
[remove=sustain] [remove=clamped] [env_level[0-5]=level]
[env_time[0-5]=time]
Example: 0 acpiano.pat amp=110
This is the MIDI patch number the instrument belongs to.
The filename of the Gravis Ulstrasound compatable patch file. If
the filename is missing the .pat extention, libWildMidi will add
.pat when attempting to load the file.
amp=volume
Force the volume of the samples in this patch to volume
prior to using it.
note=midinote
Use note midinote when playing the samples in this patch.
NOTE: this is for instruments listed under drumset.
keep=loop
Play the samples in this patch with the loop, when nor‐
mally we would not for this instrument.
keep=env
Use the envelope data in this patch, when normally we
wouldn't for this instrument.
remove=sustain
Do note hold the note after the 3rd envelope until note
off, which is what happens if the sustain bit is set in
the patch file.
remove=clamped
Do not jump to 6th envelope on note off, which is what
happens if the clamped bit is set in the patch file.
env_level[0-5]=level
Set the envelope level to level with 1.0 being maximum,
and 0.0 being minimum.
Example: set 5th envelope level to 10% -
env_level[0-5]=0.1
env_time[0-5]=time
Set the envelope time to time with a resolution of
1/1000th of a second. This setting is the time it should
take for the envelope to reach maximum level.
Example: set 1st enevelope time to 1sec - env_time0=1000
Example: set 3rd enevelope time to 0.5secs- env_time2=500
SEE ALSOWildMidi_GetString(3), WildMidi_Init(3), WildMidi_MasterVolume(3),
WildMidi_Open(3), WildMidi_OpenBuffer(3), WildMidi_SetOption(3), Wild‐
Midi_GetOutput(3), WildMidi_GetInfo(3), WildMidi_FastSeek(3), Wild‐
Midi_Close(3), WildMidi_Shutdown(3), wildmidi(1)AUTHOR
Chris Ison <wildcode@users.sourceforge.net>
COPYRIGHT
Copyright (C) Chris Ison 2001-2010
This file is part of WildMIDI.
WildMIDI is free software: you can redistribute and/or modify the
player under the terms of the GNU General Public License and you can
redistribute and/or modify the library under the terms of the GNU
Lesser General Public License as published by the Free Software Founda‐
tion, either version 3 of the licenses, or(at your option) any later
version.
WildMIDI is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
and the GNU Lesser General Public License for more details.
You should have received a copy of the GNU General Public License and
the GNU Lesser General Public License along with WildMIDI. If not, see
<http://www.gnu.org/licenses/>.
This manpage is licensed under the Creative Commons Attribution-Share
Alike 3.0 Unported License. To view a copy of this license, visit
http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Cre‐
ative Commons, 171 Second Street, Suite 300, San Francisco, California,
94105, USA.
05 June 2010 wildmidi.cfg(5)