unbound-anchor(8) unbound 1.4.20 unbound-anchor(8)NAMEunbound-anchor - Unbound anchor utility.
SYNOPSISunbound-anchor [opts]
DESCRIPTION
Unbound-anchor performs setup or update of the root trust anchor for
DNSSEC validation. It can be run (as root) from the commandline, or
run as part of startup scripts. Before you start the unbound(8) DNS
server.
Suggested usage:
# in the init scripts.
# provide or update the root anchor (if necessary)
unbound-anchor-a "/var/lib/unbound/root.key"
# Please note usage of this root anchor is at your own risk
# and under the terms of our LICENSE (see source).
#
# start validating resolver
# the unbound.conf contains:
# auto-trust-anchor-file: "/var/lib/unbound/root.key"
unbound -c unbound.conf
This tool provides builtin default contents for the root anchor and
root update certificate files.
It tests if the root anchor file works, and if not, and an update is
possible, attempts to update the root anchor using the root update cer‐
tificate. It performs a https fetch of root-anchors.xml and checks the
results, if all checks are successful, it updates the root anchor file.
Otherwise the root anchor file is unchanged. It performs RFC5011
tracking if the DNSSEC information available via the DNS makes that
possible.
It does not perform an update if the certificate is expired, if the
network is down or other errors occur.
The available options are:
-a file
The root anchor key file, that is read in and written out.
Default is /var/lib/unbound/root.key. If the file does not
exist, or is empty, a builtin root key is written to it.
-c file
The root update certificate file, that is read in. Default is
/etc/unbound/icannbundle.pem. If the file does not exist, or is
empty, a builtin certificate is used.
-l List the builtin root key and builtin root update certificate on
stdout.
-u name
The server name, it connects to https://name. Specify without
https:// prefix. The default is "data.iana.org". It connects
to the port specified with -P. You can pass an IPv4 addres or
IPv6 address (no brackets) if you want.
-x path
The pathname to the root-anchors.xml file on the server. (forms
URL with -u). The default is /root-anchors/root-anchors.xml.
-s path
The pathname to the root-anchors.p7s file on the server. (forms
URL with -u). The default is /root-anchors/root-anchors.p7s.
This file has to be a PKCS7 signature over the xml file, using
the pem file (-c) as trust anchor.
-n name
The emailAddress for the Subject of the signer's certificate
from the p7s signature file. Only signatures from this name are
allowed. default is dnssec@iana.org. If you pass "" then the
emailAddress is not checked.
-4 Use IPv4 for domain resolution and contacting the server on
https. Default is to use IPv4 and IPv6 where appropriate.
-6 Use IPv6 for domain resolution and contacting the server on
https. Default is to use IPv4 and IPv6 where appropriate.
-f resolv.conf
Use the given resolv.conf file. Not enabled by default, but you
could try to pass /etc/resolv.conf on some systems. It contains
the IP addresses of the recursive nameservers to use. However,
since this tool could be used to bootstrap that very recursive
nameserver, it would not be useful (since that server is not up
yet, since we are bootstrapping it). It could be useful in a
situation where you know an upstream cache is deployed (and run‐
ning) and in captive portal situations.
-r root.hints
Use the given root.hints file (same syntax as the BIND and
Unbound root hints file) to bootstrap domain resolution. By
default a list of builtin root hints is used. Unbound-anchor
goes to the network itself for these roots, to resolve the
server (-u option) and to check the root DNSKEY records. It
does so, because the tool when used for bootstrapping the recur‐
sive resolver, cannot use that recursive resolver itself because
it is bootstrapping that server.
-v More verbose. Once prints informational messages, multiple times
may enable large debug amounts (such as full certificates or
byte-dumps of downloaded files). By default it prints almost
nothing. It also prints nothing on errors by default; in that
case the original root anchor file is simply left undisturbed,
so that a recursive server can start right after it.
-C unbound.conf
Debug option to read unbound.conf into the resolver process
used.
-P port
Set the port number to use for the https connection. The
default is 443.
-F Debug option to force update of the root anchor through down‐
loading the xml file and verifying it with the certificate. By
default it first tries to update by contacting the DNS, which
uses much less bandwidth, is much faster (200 msec not 2 sec),
and is nicer to the deployed infrastructure. With this option,
it still attempts to do so (and may verbosely tell you), but
then ignores the result and goes on to use the xml fallback
method.
-h Show the version and commandline option help.
EXIT CODE
This tool exits with value 1 if the root anchor was updated using the
certificate or if the builtin root-anchor was used. It exits with code
0 if no update was necessary, if the update was possible with RFC5011
tracking, or if an error occurred.
You can check the exit value in this manner:
unbound-anchor-a "root.key" || logger "Please check root.key"
Or something more suitable for your operational environment.
TRUST
The root keys and update certificate included in this tool are provided
for convenience and under the terms of our license (see the LICENSE
file in the source distribution or http://unbound.nlnet‐
labs.nl/svn/trunk/LICENSE) and might be stale or not suitable to your
purpose.
By running "unbound-anchor -l" the keys and certificate that are con‐
figured in the code are printed for your convenience.
The build-in configuration can be overridden by providing a root-cert
file and a rootkey file.
FILES
/var/lib/unbound/root.key
The root anchor file, updated with 5011 tracking, and read and
written to. The file is created if it does not exist.
/etc/unbound/icannbundle.pem
The trusted self-signed certificate that is used to verify the
downloaded DNSSEC root trust anchor. You can update it by
fetching it from https://data.iana.org/root-anchors/icannbun‐
dle.pem (and validate it). If the file does not exist or is
empty, a builtin version is used.
https://data.iana.org/root-anchors/root-anchors.xml
Source for the root key information.
https://data.iana.org/root-anchors/root-anchors.p7s
Signature on the root key information.
SEE ALSOunbound.conf(5), unbound(8).
NLnet Labs Mar 21, 2013 unbound-anchor(8)
