sendiso(1) Linux IEEE 1394 sendiso(1)NAMEsendiso - send IEEE 1394 isochronous packets from dump file
SYNOPSISsendiso [ options ] FILE
DESCRIPTIONsendiso takes the dump file FILE as generated by dumpiso(1), extracts
the packets and sends them as they were received (in the same order,
with the same channel numbers) as fast as possible - timing of the
original dump is not preserved.
This program does not allocate any isochronous resources but just
starts sending. It should not be used in live environments where it
might interfere with properly set up isochronous transmissions, it is a
debug and performance benchmarking tool.
OPTIONS-l, --loop=COUNT
Send dump file COUNT times. Defaults to 1.
-i, --infinite
Send dump file in an endless loop.
-s, --speed=SPEED
Send packets at speed SPEED, which can be given as 100, 200 and
400 (in Mbit/s) or abbreviated as 1, 2 and 4. Defaults to 100.
-p, --port=PORT
Choose port PORT for sending. A port is a 1394 card or chip and
represents one connected bus, therefore this is only relevant
when you have multiple of these. Defaults to 0.
-h, --help
Show help text and exit.
BUGS
None known.
SEE ALSOdumpiso(1), isodump(5)AUTHOR
Andreas Bombe <aeb@debian.org>
libraw1394 1.3.0 sendiso(1)
