sccs-admin(1) User Commands sccs-admin(1)NAME
sccs-admin, admin - create and administer SCCS history files
SYNOPSIS
/usr/ccs/bin/admin [-bhnz] [-a username | groupid]...
[-d flag] ... [-e username | groupid]...
[-f flag [value]] ... [-i [filename]] [-m mr-list]
[-rrelease] [-t [description-file]] [-y [comment]] s.filename...
DESCRIPTION
The admin command creates or modifies the flags and other parameters of
SCCS history files. Filenames of SCCS history files begin with the `s.'
prefix, and are referred to as s.files, or ``history'' files.
The named s.file is created if it does not exist already. Its parame‐
ters are initialized or modified according to the options you specify.
Parameters not specified are given default values when the file is ini‐
tialized, otherwise they remain unchanged.
If a directory name is used in place of the s.filename argument, the
admin command applies to all s.files in that directory. Unreadable
s.files produce an error. The use of `−' as the s.filename argument
indicates that the names of files are to be read from the standard
input, one s.file per line.
OPTIONS
The following options are supported:
-a username | groupid Adds a user name, or a numerical group ID, to
the list of users who may check deltas in or
out. If the list is empty, any user is allowed
to do so.
-b Forces encoding of binary data. Files that
contain ASCII NUL or other control characters,
or that do not end with a NEWLINE, are recog‐
nized as binary data files. The contents of
such files are stored in the history file in
encoded form. See uuencode(1C) for details
about the encoding. This option is normally
used in conjunction with -i to force admin to
encode initial versions not recognized as con‐
taining binary data.
-d flag Deletes the indicated flag from the SCCS file.
The -d option may be specified only for exist‐
ing s.files. See -f for the list of recognized
flags.
-e username | groupid Erases a user name or group ID from the list
of users allowed to make deltas.
-f flag [value] Sets the indicated flag to the (optional)
value specified. The following flags are rec‐
ognized:
b
Enables branch deltas. When b is set,
branches can be created using the -b
option of the SCCS get command (see sccs-
get(1)).
cceil
Sets a ceiling on the releases that can be
checked out. ceil is a number less than or
equal to 9999. If c is not set, the ceil‐
ing is 9999.
dsid
Specifies the default delta number, or
SID, to be used by an SCCS get command.
ffloor
Sets a floor on the releases that can be
checked out. The floor is a number greater
than 0 but less than 9999. If f is not
set, the floor is 1.
i
Treats the `No id keywords (ge6)' message
issued by an SCCS get or delta command as
an error rather than a warning.
j
Allows concurrent updates.
la
l release[, release...]
Locks the indicated list of releases
against deltas. If a is used, this flag
locks out deltas to all releases. An SCCS
`get -e' command fails when applied
against a locked release.
mmodule
Supplies a value for the module name to
which the sccs-admin.1 keyword is to
expand. If the m flag is not specified,
the value assigned is the name of the SCCS
file with the leading s. removed.
n
Creates empty releases when releases are
skipped. These null (empty) deltas serve
as anchor points for branch deltas.
qvalue
Supplies a value to which the keyword is
to expand when a read-only version is
retrieved with the SCCS get command.
snumber
Specifies how many lines of code are
scanned for the SCCS keyword.
ttype
Supplies a value for the module type to
which the keyword is to expand.
v[program]
Specifies a validation program for the MR
numbers associated with a new delta. The
optional program specifies the name of an
MR number validity checking program. If
this flag is set when creating an SCCS
file, the -m option must also be used, in
which case the list of MRs may be empty.
y[value,[value]]
Specifies the SCCS keywords to be
expanded. If no value is specified, no
keywords will be expanded.
-h Checks the structure of an existing s.file
(see sccsfile(4)), and compares a newly com‐
puted check-sum with one stored in the first
line of that file. -h inhibits writing on the
file and so nullifies the effect of any other
options.
-i[filename] Initializes the history file with text from
the indicated file. This text constitutes the
initial delta, or set of checked-in changes.
If filename is omitted, the initial text is
obtained from the standard input. Omitting the
-i option altogether creates an empty s.file.
You can only initialize one s.file with text
using -i. This option implies the -n option.
-m mr-list Inserts the indicated Modification Request
(MR) numbers into the commentary for the ini‐
tial version. When specifying more than one MR
number on the command line, mr-list takes the
form of a quoted, space-separated list. A
warning results if the v flag is not set or
the MR validation fails.
-n Creates a new SCCS history file.
-rrelease Specifies the release for the initial delta.
-r may be used only in conjunction with -i.
The initial delta is inserted into release 1
if this option is omitted. The level of the
initial delta is always 1. Initial deltas are
named 1.1 by default.
-t[description-file] Inserts descriptive text from the file
description-file. When -t is used in conjunc‐
tion with -n, or -i to initialize a new
s.file, the description-file must be supplied.
When modifying the description for an existing
file: a -t option without a description-file
removes the descriptive text, if any; a -t
option with a description-file replaces the
existing text.
-y[comment] Inserts the indicated comment in the ``Com‐
ments:'' field for the initial delta. Valid
only in conjunction with -i or -n. If -y
option is omitted, a default comment line is
inserted that notes the date and time the his‐
tory file was created.
-z Recomputes the file check-sum and stores it in
the first line of the s.file. Caution: It is
important to verify the contents of the his‐
tory file (see sccs-val(1), and the print sub‐
command in sccs(1)), since using -z on a truly
corrupted file may prevent detection of the
error.
EXAMPLES
Example 1 Preventing SCCS keyword expansion
In the following example, 10 lines of file will be scanned and only the
W,Y,X keywords will be interpreted:
example% sccs admin -fs10 file
example% sccs admin -fyW,Y,X file
example% get file
ENVIRONMENT VARIABLES
See environ(5) for descriptions of the following environment variables
that affect the execution of alias and unalias: LANG, LC_ALL, LC_CTYPE,
LC_MESSAGES, and NLSPATH.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 An error occurred.
FILES
s.* history file
SCCS/s.* history file in SCCS subdirectory
z.* temporary lock file
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Availability │SUNWsprot │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │Committed │
├─────────────────────────────┼─────────────────────────────┤
│Standard │See standards(5). │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOsccs(1), sccs-cdc(1), sccs-delta(1), sccs-get(1), sccs-help(1), sccs-
rmdel(1), sccs-val(1), sccsfile(4), attributes(5), environ(5), stan‐
dards(5)DIAGNOSTICS
Use the SCCS help command for explanations (see sccs-help(1)).
WARNINGS
The last component of all SCCS filenames must have the `s.' prefix. New
SCCS files are given mode 444 (see chmod(1)). All writing done by
admin is to a temporary file with an x. prefix, created with mode 444
for a new SCCS file, or with the same mode as an existing SCCS file.
After successful execution of admin, the existing s.file is removed and
replaced with the x.file. This ensures that changes are made to the
SCCS file only when no errors have occurred.
It is recommended that directories containing SCCS files have permis‐
sion mode 755, and that the s.files themselves have mode 444. The mode
for directories allows only the owner to modify the SCCS files con‐
tained in the directories, while the mode of the s.files prevents all
modifications except those performed using SCCS commands.
If it should be necessary to patch an SCCS file for any reason, the
mode may be changed to 644 by the owner to allow use of a text editor.
However, extreme care must be taken when doing this. The edited file
should always be processed by an `admin -h' command to check for cor‐
ruption, followed by an `admin -z' command to generate a proper check-
sum. Another `admin -h' command is recommended to ensure that the
resulting s.file is valid.
admin also uses a temporary lock s.file, starting with the `z.' prefix,
to prevent simultaneous updates to the s.file. See sccs-get(1) for fur‐
ther information about the `z.file'.
SunOS 5.10 30 Sep 2002 sccs-admin(1)