sane(7) SANE Scanner Access Now Easy sane(7)NAMEsane - Scanner Access Now Easy: API for accessing scanners
DESCRIPTION
SANE is an application programming interface (API) that provides stan‐
dardized access to any raster image scanner hardware. The standardized
interface makes it possible to write just one driver for each scanner
device instead of one driver for each scanner and application.
While SANE is primarily targeted at a UNIX environment, the standard
has been carefully designed to make it possible to implement the API on
virtually any hardware or operating system.
This manual page provides a summary of the information available about
SANE.
If you have trouble getting your scanner detected, read the PROBLEMS
section.
TERMINOLOGY
An application that uses the SANE interface is called a SANE frontend.
A driver that implements the SANE interface is called a SANE backend.
A meta backend provides some means to manage one or more other back‐
ends.
SOFTWARE PACKAGES
The package `sane-backends' contains a lot of backends, documentation
(including the SANE standard), networking support, and the command line
frontend `scanimage'. The frontends `xscanimage', `xcam', and
`scanadf' are included in the package `sane-frontends'. Both packages
can be downloaded from the SANE homepage
(http://www.sane-project.org/). Information about other frontends and
backends can also be found on the SANE homepage.
GENERAL INFORMATION
The following sections provide short descriptions and links to more
information about several aspects of SANE. A name with a number in
parenthesis (e.g. `sane-dll(5)') points to a manual page. In this case
`man 5 sane-dll' will display the page. Entries like
`/usr/doc/sane-1.0.24/sane.tex' are references to text files that were
copied to the SANE documentation directory (/usr/doc/sane-1.0.24/) dur‐
ing installation. Everything else is a URL to a resource on the web.
SANE homepage
Information on all aspects of SANE including a tutorial and a link to
the SANE FAQ can be found on the SANE homepage:
http://www.sane-project.org/.
SANE device lists
The SANE device lists contain information about the status of SANE
support for a specific device. If your scanner is not listed there
(either supported or unsupported), please contact us. See section HOW
CAN YOU HELP SANE for details. There are lists for specific releases
of SANE, for the current development version and a search engine:
http://www.sane-project.org/sane-supported-devices.html. The lists
are also installed on your system at /usr/doc/sane-1.0.24/.
SANE mailing list
There is a mailing list for the purpose of discussing the SANE stan‐
dard and its implementations: sane-devel. Despite its name, the list
is not only intended for developers, but also for users. There are
also some more lists for special topics, however, for users,
sane-devel is the right list. How to subscribe and unsubscribe:
http://www.sane-project.org/mailing-lists.html.
SANE IRC channel
The IRC (Internet Relay Chat) channel #sane can be found on the
Freenode network (irc.freenode.net). It's for discussing SANE prob‐
lems, talking about development and general SANE related chatting.
Before asking for help, please read the other documentation mentioned
in this manual page. The channel's topic is also used for announce‐
ments of problems with SANE infrastructure (mailing lists, web
server, etc.).
Compiling and installing SANE
Look at /usr/doc/sane-1.0.24/README and the os-dependent README files
for information about compiling and installing SANE.
SCSI configuration
For information about various systems and SCSI controllers see
sane-scsi(5).
USB configuration
For information about USB configuration see sane-usb(5).
FRONTENDS AND MISCELLANEOUS PROGRAMS
scanimage
Command-line frontend. See scanimage(1).
saned
SANE network daemon that allows remote clients to access image acqui‐
sition devices available on the local host. See saned(8).
sane-find-scanner
Command-line tool to find SCSI and USB scanners and determine their
Unix device files. See sane-find-scanner(1).
Also, have a look at the sane-frontends package (including xscanimage,
xcam, and scanadf) and the frontend information page at
http://www.sane-project.org/sane-frontends.html.
BACKENDS FOR SCANNERS
abaton
The SANE backend for Abaton flatbed scanners supports the Scan 300/GS
(8bit, 256 levels of gray) and the Scan 300/S (black and white,
untested). See sane-abaton(5) for details.
agfafocus
This backend supports AGFA Focus scanners and the Siemens S9036
(untested). See sane-agfafocus(5) for details.
apple
The SANE backend for Apple flatbed scanners supports the following
scanners: AppleScanner, OneScanner and ColorOneScanner. See
sane-apple(5) for details.
artec
The SANE Artec backend supports several Artec/Ultima SCSI flatbed
scanners as well as the BlackWidow BW4800SP and the Plustek 19200S.
See sane-artec(5) for details.
artec_eplus48u
The SANE artec_eplus48u backend supports the scanner Artec E+ 48U and
re-badged models like Tevion MD 9693, Medion MD 9693, Medion MD 9705
and Trust Easy Webscan 19200. See sane-artec_eplus48u(5) for details.
as6e
This is a SANE backend for using the Artec AS6E parallel port inter‐
face scanner. See sane-as6e(5) for details.
avision
This backend supports several Avision based scanners. This includes
the original Avision scanners (like AV 630, AV 620, ...) as well as
the HP ScanJet 53xx and 74xx series, Fujitsu ScanPartner, some Mit‐
subishi and Minolta film-scanners. See sane-avision(5) for details.
bh
The bh backend provides access to Bell+Howell Copiscan II series doc‐
ument scanners. See sane-bh(5) for details.
canon
The canon backend supports the CanoScan 300, CanoScan 600, and
CanoScan 2700F SCSI flatbed scanners. See sane-canon(5) for details.
canon630u
The canon630u backend supports the CanoScan 630u and 636u USB scan‐
ners. See sane-canon630u(5) for details.
canon_dr
The canon_dr backend supports the Canon DR-Series ADF SCSI and USB
scanners. See sane-canon_dr(5) for details.
canon_pp
The canon_pp backend supports the CanoScan FB330P, FB630P, N340P and
N640P parallel port scanners. See sane-canon_pp(5) for details.
cardscan
This backend provides support for Corex Cardscan USB scanners. See
sane-cardscan(5) for details.
coolscan
This is a SANE backend for Nikon Coolscan film-scanners. See
sane-coolscan(5) for details.
coolscan2
This is a SANE backend for Nikon Coolscan film-scanners. See
sane-coolscan2(5) or http://coolscan2.sourceforge.net for details.
epjitsu
The epjitsu backend provides support for Epson-based Fujitsu USB
scanners. See sane-epjitsu(5) for details.
epson
The SANE epson backend provides support for Epson SCSI, parallel port
and USB flatbed scanners. See sane-epson(5) for details.
fujitsu
The fujitsu backend provides support for most Fujitsu SCSI and USB,
flatbed and adf scanners. See sane-fujitsu(5) for details.
genesys
The genesys backend provides support for several scanners based on
the Genesys Logic GL646, GL841, GL843, GL847 and GL124 chips like the
Medion 6471 and Hewlett-Packard 2300c.
See sane-genesys(5) for details.
gt68xx
The gt68xx backend provides support for scanners based on the
Grandtech GT-6801 and GT-6816 chips like the Artec Ultima 2000 and
several Mustek BearPaw CU and TA models. Some Genius, Lexmark,
Medion, Packard Bell, Plustek, and Trust scanners are also supported.
See sane-gt68xx(5) for details.
hp
The SANE hp backend provides access to Hewlett-Packard ScanJet scan‐
ners which support SCL (Scanner Control Language by HP). See
sane-hp(5) for details.
hpsj5s
The SANE backend for the Hewlett-Packard ScanJet 5S scanner. See
sane-hpsj5s(5) for details.
hp3500
The SANE backend for the Hewlett-Packard ScanJet 3500 series. See
sane-hp3500(5) for details.
hp3900
The SANE backend for the Hewlett-Packard ScanJet 3900 series. See
sane-hp3900(5) for details.
hp4200
The SANE backend for the Hewlett-Packard ScanJet 4200 series. See
sane-hp4200(5) for details.
hp5400
The SANE backend for the Hewlett-Packard ScanJet 54XXC series. See
sane-hp5400(5) for details.
hpljm1005
The SANE backend for the Hewlett-Packard LaserJet M1005 scanner. See
sane-hpljm1005(5) for details.
hs2p
The SANE backend for the Ricoh IS450 family of SCSI scanners. See
sane-hs2p(5) for details.
ibm
The SANE backend for some IBM and Ricoh SCSI scanners. See
sane-ibm(5) for details.
kodak
The SANE backend for some large Kodak scanners. See sane-kodak(5) for
details.
kodakaio
The SANE backend for Kodak AiO printer/scanners. See sane-kodakaio(5)
for details.
kvs1025
The SANE backend for Panasonic KV-S102xC scanners. See
sane-kvs1025(5) for details.
leo
This backend supports the Leo S3 and the Across FS-1130, which is a
re-badged LEO FS-1130 scanner. See sane-leo(5) for details.
lexmark
This backend supports the Lexmark X1100 series of USB scanners. See
sane-lexmark(5) for details.
ma1509
The ma1509 backend supports the Mustek BearPaw 1200F USB flatbed
scanner. See sane-ma1509(5) for details.
magicolor
The magicolor backend supports the KONICA MINOLTA magicolor 1690MF
multi-function printer/scanner/fax. See sane-magicolor(5) for
details.
matsushita
This backend supports some Panasonic KVSS high speed scanners. See
sane-matsushita(5) for details.
microtek
The microtek backend provides access to the "second generation"
Microtek scanners with SCSI-1 command set. See sane-microtek(5) for
details.
microtek2
The microtek2 backend provides access to some Microtek scanners with
a SCSI-2 command set. See sane-microtek2(5) for details.
mustek
The SANE mustek backend supports most Mustek SCSI flatbed scanners
including the Paragon and ScanExpress series and the 600 II N and 600
II EP (non-SCSI). Some Trust scanners are also supported. See
sane-mustek(5) for details.
mustek_pp
The mustek_pp backend provides access to Mustek parallel port flatbed
scanners. See sane-mustek_pp(5) for details.
mustek_usb
The mustek_usb backend provides access to some Mustek ScanExpress USB
flatbed scanners. See sane-mustek_usb(5) for details.
mustek_usb2
The mustek_usb2 backend provides access to scanners using the SQ113
chipset like the Mustek BearPaw 2448 TA Pro USB flatbed scanner. See
sane-mustek_usb2(5) for details.
nec
The SANE nec backend supports the NEC PC-IN500/4C SCSI scanner. See
sane-nec(5) for details.
niash
The niash backend supports the Agfa Snapscan Touch and the HP ScanJet
3300c, 3400c, and 4300c USB flatbed scanners. See sane-niash(5) for
details.
p5
The SANE backend for Primax PagePartner. See sane-p5(5) for details.
pie
The pie backend provides access to Pacific Image Electronics (PIE)
and Devcom SCSI flatbed scanners. See sane-pie(5) for details.
pixma
The pixma backend supports Canon PIXMA MP series (multi-function
devices). See sane-pixma(5) or http://home.arcor.de/wittawat/pixma/
for details.
plustek
The SANE plustek backend supports USB flatbed scanners that use the
National Semiconductor LM983[1/2/3]-chipset aka Merlin. Scanners
using this LM983x chips include some models from Plustek, KYE/Genius,
Hewlett-Packard, Mustek, Umax, Epson, and Canon. See sane-plustek(5)
for details.
plustek_pp
The SANE plustek_pp backend supports Plustek parallel port flatbed
scanners. Scanners using the Plustek ASIC P96001, P96003, P98001 and
P98003 include some models from Plustek, KYE/Genius, Primax. See
sane-plustek_pp(5) for details.
ricoh
The ricoh backend provides access to the following Ricoh flatbed
scanners: IS50 and IS60. See sane-ricoh(5) for details.
s9036
The s9036 backend provides access to Siemens 9036 flatbed scanners.
See sane-s9036(5) for details.
sceptre
The sceptre backend provides access to the Sceptre S1200 flatbed
scanner. See sane-sceptre(5) for details.
sharp
The SANE sharp backend supports Sharp SCSI scanners. See
sane-sharp(5) for details.
sm3600
The SANE sm3600 backend supports the Microtek ScanMaker 3600 USB
scanner. See sane-sm3600(5) for details.
sm3840
The SANE sm3840 backend supports the Microtek ScanMaker 3840 USB
scanner. See sane-sm3840(5) for details.
snapscan
The snapscan backend supports AGFA SnapScan flatbed scanners. See
sane-snapscan(5) for details.
sp15c
This backend supports the Fujitsu FCPA ScanPartner 15C flatbed scan‐
ner. See sane-sp15c(5) for details.
st400
The sane-st400 backend provides access to Siemens ST400 and ST800.
See sane-st400(5) for details.
tamarack
The SANE tamarack backend supports Tamarack Artiscan flatbed scan‐
ners. See sane-tamarack(5) for details.
teco1 teco2 teco3
The SANE teco1, teco2 and teco3 backends support some TECO scanners,
usually sold under the Relisys, Trust, Primax, Piotech, Dextra names.
See sane-teco1(5), sane-teco2(5) and sane-teco3(5) for details.
u12
The sane-u12 backend provides USB flatbed scanners based on Plustek's
ASIC 98003 (parallel-port ASIC) and a GeneSys Logics' USB-parport
bridge chip like the Plustek OpticPro U(T)12. See sane-u12(5) for
details.
umax
The sane-umax backend provides access to several UMAX-SCSI-scanners
and some Linotype Hell SCSI-scanners. See sane-umax(5) for details.
umax_pp
The sane-umax_pp backend provides access to Umax parallel port
flatbed scanners and the HP 3200C. See sane-umax_pp(5) for details.
umax1200u
The sane-umax1220u backend supports the UMAX Astra 1220U (USB)
flatbed scanner (and also the UMAX Astra 2000U, sort of). See
sane-umax1220u(5) for details.
Also, have a look at the backend information page at
http://www.sane-project.org/sane-supported-devices.html and the list of
projects in /usr/doc/sane-1.0.24/PROJECTS.
BACKENDS FOR DIGITAL CAMERAS
dc210
Backend for Kodak DC210 Digital Camera. See sane-dc210(5).
dc240
Backend for Kodak DC240 Digital Camera. See sane-dc240(5).
dc25
Backend for Kodak DC20/DC25 Digital Cameras. See sane-dc25(5).
dmc
Backend for the Polaroid Digital Microscope Camera. See sane-dmc(5).
gphoto2
Backend for digital cameras supported by the gphoto2 library package.
(See http://www.gphoto.org for more information and a list of sup‐
ported cameras.) Gphoto2 supports over 140 different camera models.
However, please note that more development and testing is needed
before all of these cameras will be supported by SANE backend. See
sane-gphoto2(5).
qcam
Backend for Connectix QuickCam cameras. See sane-qcam(5).
stv680
The sane-st680 backend provides access to webcams with a stv680 chip.
See sane-st680(5) for details.
Also, have a look at the backend information page at
http://www.sane-project.org/sane-supported-devices.html and the list of
projects in /usr/doc/sane-1.0.24/PROJECTS.
MISCELLANEOUS BACKENDS
dll
The sane-dll library implements a SANE backend that provides access
to an arbitrary number of other SANE backends by dynamic loading. See
sane-dll(5).
net
The SANE network daemon saned provides access to scanners located on
different computers in connection with the net backend. See
sane-net(5) and saned(8).
pnm
PNM image reader pseudo-backend. The purpose of this backend is pri‐
marily to aid in debugging of SANE frontends. See sane-pnm(5).
pint
Backend for scanners that use the PINT (Pint Is Not Twain) device
driver. The PINT driver is being actively developed on the OpenBSD
platform, and has been ported to a few other *nix-like operating sys‐
tems. See sane-pint(5).
test
The SANE test backend is for testing frontends and the SANE installa‐
tion. It provides test pictures and various test options. See
sane-test(5).
v4l
The sane-v4l library implements a SANE backend that provides generic
access to video cameras and similar equipment using the V4L (Video
for Linux) API. See sane-v4l(5).
Also, have a look at the backend information page at
http://www.sane-project.org/sane-supported-devices.html and the list of
projects in /usr/doc/sane-1.0.24/PROJECTS.
CHANGING THE TOP-LEVEL BACKEND
By default, all SANE backends (drivers) are loaded dynamically by the
sane-dll meta backend. If you have any questions about the dynamic
loading, read sane-dll(5). SANE frontend can also be linked to other
backends directly by copying or linking a backend to libsane.so in
/usr/lib64/sane.
DEVELOPER'S DOCUMENTATION
It's not hard to write a SANE backend. It can take some time, however.
You should have basic knowledge of C and enough patience to work
through the documentation and find out how your scanner works. Appended
is a list of some documents that help to write backends and frontends.
The SANE standard defines the application programming interface (API)
that is used to communicate between frontends and backends. It can be
found at /usr/doc/sane-1.0.24/sane.ps (if latex is installed on your
system) and on the SANE website: http://www.sane-project.org/html/
(HTML), or http://www.sane-project.org/sane.ps (Postscript).
There is some more information for programmers in
/usr/doc/sane-1.0.24/backend-writing.txt. Most of the internal SANE
routines (sanei) are documented using doxygen:
http://www.sane-project.org/sanei/. Before a new backend or frontend
project is started, have a look at /usr/doc/sane-1.0.24/PROJECTS for
projects that are planned or not yet included into the SANE distribu‐
tion and at our bug-tracking system:
http://www.http://www.sane-project.org/bugs.html.
There are some links on how to find out about the protocol of a scan‐
ner: http://www.meier-geinitz.de/sane/misc/develop.html.
If you start writing a backend or frontend or any other part of SANE,
please contact the sane-devel mailing list for coordination so the same
work isn't done twice.
FILES
/etc/sane.d/*.conf
The backend configuration files.
/usr/lib64/sane/libsane-*.a
The static libraries implementing the backends.
/usr/lib64/sane/libsane-*.so
The shared libraries implementing the backends (present on sys‐
tems that support dynamic loading).
/usr/doc/sane-1.0.24/*
SANE documentation: The standard, READMEs, text files for back‐
ends etc.
PROBLEMS
If your device isn't found but you know that it is supported, make sure
that it is detected by your operating system. For SCSI and USB scan‐
ners, use the sane-find-scanner tool (see sane-find-scanner(1) for
details). It prints one line for each scanner it has detected and some
comments (#). If sane-find-scanner finds your scanner only as root but
not as normal user, the permissions for the device files are not
adjusted correctly. If the scanner isn't found at all, the operating
system hasn't detected it and may need some help. Depending on the type
of your scanner, read sane-usb(5) or sane-scsi(5). If your scanner (or
other device) is not connected over the SCSI bus or USB, read the back‐
end's manual page for details on how to set it up.
Now your scanner is detected by the operating system but not by SANE?
Try scanimage -L. If the scanner is not found, check that the back‐
end's name is mentioned in /etc/sane.d/dll.conf. Some backends are
commented out by default. Remove the comment sign for your backend in
this case. Also some backends aren't compiled at all if one of their
prerequisites are missing. Examples include dc210, dc240, canon_pp,
hpsj5s, gphoto2, pint, qcam, v4l, net, sm3600, snapscan, pnm. If you
need one of these backends and they aren't available, read the build
instructions in the README file and the individual manual pages of the
backends.
Another reason for not being detected by scanimage -L may be a missing
or wrong configuration in the backend's configuration file. While SANE
tries to automatically find most scanners, some can't be setup cor‐
rectly without the intervention of the administrator. Also on some
operating systems auto-detection may not work. Check the backend's man‐
ual page for details.
If your scanner is still not found, try setting the various environment
variables that are available to assist in debugging. The environment
variables are documented in the relevant manual pages. For example, to
get the maximum amount of debug information when testing a Mustek SCSI
scanner, set environment variables SANE_DEBUG_DLL, SANE_DEBUG_MUSTEK,
and SANE_DEBUG_SANEI_SCSI to 128 and then invoke scanimage -L . The
debug messages for the dll backend tell if the mustek backend was found
and loaded at all. The mustek messages explain what the mustek backend
is doing while the SCSI debugging shows the low level handling. If you
can't find out what's going on by checking the messages carefully, con‐
tact the sane-devel mailing list for help (see REPORTING BUGS below).
Now that your scanner is found by scanimage -L, try to do a scan: scan‐
image >image.pnm. This command starts a scan for the default scanner
with default settings. All the available options are listed by running
scanimage --help. If scanning aborts with an error message, turn on
debugging as mentioned above. Maybe the configuration file needs some
tuning, e.g. to setup the path to a firmware that is needed by some
scanners. See the backend's manual page for details. If you can't find
out what's wrong, contact sane-devel.
To check that the SANE libraries are installed correctly you can use
the test backend, even if you don't have a scanner or other SANE
device:
scanimage -d test -T
You should get a list of PASSed tests. You can do the same with your
backend by changing "test" to your backend's name.
So now scanning with scanimage works and you want to use one of the
graphical frontends like xsane, xscanimage, or quiteinsane but those
frontends don't detect your scanner? One reason may be that you
installed two versions of SANE. E.g. the version that was installed by
your distribution in /usr and one you installed from source in
/usr/local/. Make sure that only one version is installed. Another
possible reason is, that your system's dynamic loader can't find the
SANE libraries. For Linux, make sure that /etc/ld.so.conf contains
/usr/local/lib and does not contain /usr/local/lib/sane. See also the
documentation of the frontends.
HOW CAN YOU HELP SANE
We appreciate any help we can get. Please have a look at our web page
about contributing to SANE: http://www.sane-project.org/contrib.html
CONTACT
For reporting bugs or requesting new features, please use our bug-
tracking system: http://www.sane-project.org/bugs.html. You can also
contact the author of your backend directly. Usually the email address
can be found in the /usr/doc/sane-1.0.24/AUTHORS file or the backend's
manpage. For general discussion about SANE, please use the SANE mailing
list sane-devel (see http://www.sane-project.org/mailing-lists.html for
details).
SEE ALSOsaned(8), sane-find-scanner(1), scanimage(1), sane-abaton(5),
sane-agfafocus(5), sane-apple(5), sane-artec(5),
sane-artec_eplus48u(5), sane-as6e(5), sane-avision(5), sane-bh(5),
sane-canon(5), sane-canon630u(5), sane-canon_dr(5), sane-canon_pp(5),
sane-cardscan(5), sane-coolscan2(5), sane-coolscan(5), sane-dc210(5),
sane-dc240(5), sane-dc25(5), sane-dll(5), sane-dmc(5), sane-epson(5),
sane-fujitsu(5), sane-genesys(5), sane-gphoto2(5), sane-gt68xx(5),
sane-hp(5), sane-hpsj5s(5), sane-hp3500(5), sane-hp3900(5),
sane-hp4200(5), sane-hp5400(5), sane-hpljm1005(5), sane-ibm(5),
sane-kodak(5), sane-leo(5), sane-lexmark(5), sane-ma1509(5), sane-mat‐
sushita(5), sane-microtek2(5), sane-microtek(5), sane-mustek(5),
sane-mustek_pp(5), sane-mustek_usb(5), sane-mustek_usb2(5),
sane-nec(5), sane-net(5), sane-niash(5), sane-pie(5), sane-pint(5),
sane-plustek(5), sane-plustek_pp(5), sane-pnm(5), sane-qcam(5),
sane-ricoh(5), sane-s9036(5), sane-sceptre(5), sane-scsi(5),
sane-sharp(5), sane-sm3600(5), sane-sm3840(5), sane-snapscan(5),
sane-sp15c(5), sane-st400(5), sane-stv680(5), sane-tamarack(5),
sane-teco1(5), sane-teco2(5), sane-teco3(5), sane-test(5), sane-u12(5),
sane-umax1220u(5), sane-umax(5), sane-umax_pp(5), sane-usb(5),
sane-v4l(5)AUTHOR
David Mosberger-Tang and many many more (see
/usr/doc/sane-1.0.24/AUTHORS for details). This man page was written
by Henning Meier-Geinitz. Quite a lot of text was taken from the SANE
standard, several man pages, and README files.
14 Jul 2008 sane(7)
