POD2MAN(1) Perl Programmers Reference Guide POD2MAN(1)NAMEpod2man - Convert POD data to formatted *roff input
SYNOPSISpod2man [--section=manext] [--release=version]
[--center=string] [--date=string] [--fixed=font]
[--fixedbold=font] [--fixeditalic=font]
[--fixedbolditalic=font] [--name=name] [--official] [--lax]
[--quotes=quotes] [--verbose] [input [output] ...]
pod2man--help
DESCRIPTIONpod2man is a front-end for Pod::Man, using it to generate
*roff input from POD source. The resulting *roff code is
suitable for display on a terminal using nroff(1), normally
via man(1), or printing using troff(1).
input is the file to read for POD source (the POD can be
embedded in code). If input isn't given, it defaults to
STDIN. output, if given, is the file to which to write the
formatted output. If output isn't given, the formatted out-
put is written to STDOUT. Several POD files can be pro-
cessed in the same pod2man invocation (saving module load
and compile times) by providing multiple pairs of input and
output files on the command line.
--section, --release, --center, --date, and --official can
be used to set the headers and footers to use; if not given,
Pod::Man will assume various defaults. See below or
Pod::Man for details.
pod2man assumes that your *roff formatters have a fixed-
width font named CW. If yours is called something else
(like CR), use --fixed to specify it. This generally only
matters for troff output for printing. Similarly, you can
set the fonts used for bold, italic, and bold italic fixed-
width output.
Besides the obvious pod conversions, Pod::Man, and therefore
pod2man also takes care of formatting func(), func(n), and
simple variable references like $foo or @bar so you don't
have to use code escapes for them; complex expressions like
$fred{'stuff'} will still need to be escaped, though. It
also translates dashes that aren't used as hyphens into en
dashes, makes long dashes--like this--into proper em dashes,
fixes "paired quotes," and takes care of several other
troff-specific tweaks. See Pod::Man for complete informa-
tion.
OPTIONS-c string, --center=string
perl v5.8.8 2006-06-30 1
POD2MAN(1) Perl Programmers Reference Guide POD2MAN(1)
Sets the centered page header to string. The default is
"User Contributed Perl Documentation", but also see
--official below.
-d string, --date=string
Set the left-hand footer string to this value. By
default, the modification date of the input file will be
used, or the current date if input comes from STDIN.
--fixed=font
The fixed-width font to use for vertabim text and code.
Defaults to CW. Some systems may want CR instead. Only
matters for troff(1) output.
--fixedbold=font
Bold version of the fixed-width font. Defaults to CB.
Only matters for troff(1) output.
--fixeditalic=font
Italic version of the fixed-width font (actually, some-
thing of a misnomer, since most fixed-width fonts only
have an oblique version, not an italic version).
Defaults to CI. Only matters for troff(1) output.
--fixedbolditalic=font
Bold italic (probably actually oblique) version of the
fixed-width font. Pod::Man doesn't assume you have this,
and defaults to CB. Some systems (such as Solaris) have
this font available as CX. Only matters for troff(1)
output.
-h, --help
Print out usage information.
-l, --lax
No longer used. pod2man used to check its input for
validity as a manual page, but this should now be done
by podchecker(1) instead. Accepted for backwards compa-
tibility; this option no longer does anything.
-n name, --name=name
Set the name of the manual page to name. Without this
option, the manual name is set to the uppercased base
name of the file being converted unless the manual sec-
tion is 3, in which case the path is parsed to see if it
is a Perl module path. If it is, a path like
".../lib/Pod/Man.pm" is converted into a name like
"Pod::Man". This option, if given, overrides any
automatic determination of the name.
Note that this option is probably not useful when con-
verting multiple POD files at once. The convention for
perl v5.8.8 2006-06-30 2
POD2MAN(1) Perl Programmers Reference Guide POD2MAN(1)
Unix man pages for commands is for the man page title to
be in all-uppercase even if the command isn't.
-o, --official
Set the default header to indicate that this page is
part of the standard Perl release, if --center is not
also given.
-q quotes, --quotes=quotes
Sets the quote marks used to surround C<> text to
quotes. If quotes is a single character, it is used as
both the left and right quote; if quotes is two charac-
ters, the first character is used as the left quote and
the second as the right quoted; and if quotes is four
characters, the first two are used as the left quote and
the second two as the right quote.
quotes may also be set to the special value "none", in
which case no quote marks are added around C<> text (but
the font is still changed for troff output).
-r, --release
Set the centered footer. By default, this is the ver-
sion of Perl you run pod2man under. Note that some sys-
tem an macro sets assume that the centered footer will
be a modification date and will prepend something like
"Last modified: "; if this is the case, you may want to
set --release to the last modified date and --date to
the version number.
-s, --section
Set the section for the ".TH" macro. The standard sec-
tion numbering convention is to use 1 for user commands,
2 for system calls, 3 for functions, 4 for devices, 5
for file formats, 6 for games, 7 for miscellaneous
information, and 8 for administrator commands. There is
a lot of variation here, however; some systems (like
Solaris) use 4 for file formats, 5 for miscellaneous
information, and 7 for devices. Still others use 1m
instead of 8, or some mix of both. About the only sec-
tion numbers that are reliably consistent are 1, 2, and
3.
By default, section 1 will be used unless the file ends
in .pm in which case section 3 will be selected.
-v, --verbose
Print out the name of each output file as it is being
generated.
DIAGNOSTICS
If pod2man fails with errors, see Pod::Man and Pod::Parser
perl v5.8.8 2006-06-30 3
POD2MAN(1) Perl Programmers Reference Guide POD2MAN(1)
for information about what those errors might mean.
EXAMPLESpod2man program > program.1
pod2man SomeModule.pm /usr/perl/man/man3/SomeModule.3
pod2man --section=7 note.pod > note.7
If you would like to print out a lot of man page continu-
ously, you probably want to set the C and D registers to set
contiguous page numbering and even/odd paging, at least on
some versions of man(7).
troff -man -rC1 -rD1 perl.1 perldata.1 perlsyn.1 ...
To get index entries on stderr, turn on the F register, as
in:
troff -man -rF1 perl.1
The indexing merely outputs messages via ".tm" for each
major page, section, subsection, item, and any "X<>" direc-
tives. See Pod::Man for more details.
BUGS
Lots of this documentation is duplicated from Pod::Man.
NOTES
For those not sure of the proper layout of a man page, here
are some notes on writing a proper man page.
The name of the program being documented is conventionally
written in bold (using B<>) wherever it occurs, as are all
program options. Arguments should be written in italics
(I<>). Functions are traditionally written in italics; if
you write a function as function(), Pod::Man will take care
of this for you. Literal code or commands should be in C<>.
References to other man pages should be in the form
"manpage(section)", and Pod::Man will automatically format
those appropriately. As an exception, it's traditional not
to use this form when referring to module documentation; use
"L<Module::Name>" instead.
References to other programs or functions are normally in
the form of man page references so that cross-referencing
tools can provide the user with links and the like. It's
possible to overdo this, though, so be careful not to
clutter your documentation with too much markup.
The major headers should be set out using a "=head1" direc-
tive, and are historically written in the rather startling
ALL UPPER CASE format, although this is not mandatory.
Minor headers may be included using "=head2", and are
perl v5.8.8 2006-06-30 4
POD2MAN(1) Perl Programmers Reference Guide POD2MAN(1)
typically in mixed case.
The standard sections of a manual page are:
NAME
Mandatory section; should be a comma-separated list of
programs or functions documented by this podpage, such
as:
foo, bar - programs to do something
Manual page indexers are often extremely picky about the
format of this section, so don't put anything in it
except this line. A single dash, and only a single
dash, should separate the list of programs or functions
from the description. Functions should not be qualified
with "()" or the like. The description should ideally
fit on a single line, even if a man program replaces the
dash with a few tabs.
SYNOPSIS
A short usage summary for programs and functions. This
section is mandatory for section 3 pages.
DESCRIPTION
Extended description and discussion of the program or
functions, or the body of the documentation for man
pages that document something else. If particularly
long, it's a good idea to break this up into subsections
"=head2" directives like:
=head2 Normal Usage
=head2 Advanced Features
=head2 Writing Configuration Files
or whatever is appropriate for your documentation.
OPTIONS
Detailed description of each of the command-line options
taken by the program. This should be separate from the
description for the use of things like Pod::Usage. This
is normally presented as a list, with each option as a
separate "=item". The specific option string should be
enclosed in B<>. Any values that the option takes
should be enclosed in I<>. For example, the section for
the option --section=manext would be introduced with:
=item B<--section>=I<manext>
Synonymous options (like both the short and long forms)
perl v5.8.8 2006-06-30 5
POD2MAN(1) Perl Programmers Reference Guide POD2MAN(1)
are separated by a comma and a space on the same "=item"
line, or optionally listed as their own item with a
reference to the canonical name. For example, since
--section can also be written as -s, the above would be:
=item B<-s> I<manext>, B<--section>=I<manext>
(Writing the short option first is arguably easier to
read, since the long option is long enough to draw the
eye to it anyway and the short option can otherwise get
lost in visual noise.)
RETURN VALUE
What the program or function returns, if successful.
This section can be omitted for programs whose precise
exit codes aren't important, provided they return 0 on
success as is standard. It should always be present for
functions.
ERRORS
Exceptions, error return codes, exit statuses, and errno
settings. Typically used for function documentation;
program documentation uses DIAGNOSTICS instead. The
general rule of thumb is that errors printed to STDOUT
or STDERR and intended for the end user are documented
in DIAGNOSTICS while errors passed internal to the cal-
ling program and intended for other programmers are
documented in ERRORS. When documenting a function that
sets errno, a full list of the possible errno values
should be given here.
DIAGNOSTICS
All possible messages the program can print out--and
what they mean. You may wish to follow the same docu-
mentation style as the Perl documentation; see
perldiag(1) for more details (and look at the POD source
as well).
If applicable, please include details on what the user
should do to correct the error; documenting an error as
indicating "the input buffer is too small" without tel-
ling the user how to increase the size of the input
buffer (or at least telling them that it isn't possible)
aren't very useful.
EXAMPLES
Give some example uses of the program or function.
Don't skimp; users often find this the most useful part
of the documentation. The examples are generally given
as verbatim paragraphs.
Don't just present an example without explaining what it
perl v5.8.8 2006-06-30 6
POD2MAN(1) Perl Programmers Reference Guide POD2MAN(1)
does. Adding a short paragraph saying what the example
will do can increase the value of the example immensely.
ENVIRONMENT
Environment variables that the program cares about, nor-
mally presented as a list using "=over", "=item", and
"=back". For example:
=over 6
=item HOME
Used to determine the user's home directory. F<.foorc> in this
directory is read for configuration details, if it exists.
=back
Since environment variables are normally in all upper-
case, no additional special formatting is generally
needed; they're glaring enough as it is.
FILES
All files used by the program or function, normally
presented as a list, and what it uses them for. File
names should be enclosed in F<>. It's particularly
important to document files that will be potentially
modified.
CAVEATS
Things to take special care with, sometimes called WARN-
INGS.
BUGS
Things that are broken or just don't work quite right.
RESTRICTIONS
Bugs you don't plan to fix. :-)
NOTES
Miscellaneous commentary.
SEE ALSO
Other man pages to check out, like man(1), man(7),
makewhatis(8), or catman(8). Normally a simple list of
man pages separated by commas, or a paragraph giving the
name of a reference work. Man page references, if they
use the standard "name(section)" form, don't have to be
enclosed in L<> (although it's recommended), but other
things in this section probably should be when appropri-
ate.
If the package has a mailing list, include a URL or
perl v5.8.8 2006-06-30 7
POD2MAN(1) Perl Programmers Reference Guide POD2MAN(1)
subscription instructions here.
If the package has a web site, include a URL here.
AUTHOR
Who wrote it (use AUTHORS for multiple people). Includ-
ing your current e-mail address (or some e-mail address
to which bug reports should be sent) so that users have
a way of contacting you is a good idea. Remember that
program documentation tends to roam the wild for far
longer than you expect and pick an e-mail address that's
likely to last if possible.
COPYRIGHT AND LICENSE
For copyright
Copyright YEAR(s) by YOUR NAME(s)
(No, (C) is not needed. No, "all rights reserved" is
not needed.)
For licensing the easiest way is to use the same licens-
ing as Perl itself:
This library is free software; you may redistribute it and/or modify
it under the same terms as Perl itself.
This makes it easy for people to use your module with
Perl. Note that this licensing is neither an endorse-
ment or a requirement, you are of course free to choose
any licensing.
HISTORY
Programs derived from other sources sometimes have this,
or you might keep a modification log here. If the log
gets overly long or detailed, consider maintaining it in
a separate file, though.
In addition, some systems use CONFORMING TO to note confor-
mance to relevant standards and MT-LEVEL to note safeness
for use in threaded programs or signal handlers. These
headings are primarily useful when documenting parts of a C
library. Documentation of object-oriented libraries or
modules may use CONSTRUCTORS and METHODS sections for
detailed documentation of the parts of the library and save
the DESCRIPTION section for an overview; other large modules
may use FUNCTIONS for similar reasons. Some people use
OVERVIEW to summarize the description if it's quite long.
Section ordering varies, although NAME should always be the
first section (you'll break some man page systems other-
wise), and NAME, SYNOPSIS, DESCRIPTION, and OPTIONS
perl v5.8.8 2006-06-30 8
POD2MAN(1) Perl Programmers Reference Guide POD2MAN(1)
generally always occur first and in that order if present.
In general, SEE ALSO, AUTHOR, and similar material should be
left for last. Some systems also move WARNINGS and NOTES to
last. The order given above should be reasonable for most
purposes.
Finally, as a general note, try not to use an excessive
amount of markup. As documented here and in Pod::Man, you
can safely leave Perl variables, function names, man page
references, and the like unadorned by markup and the POD
translators will figure it out for you. This makes it much
easier to later edit the documentation. Note that many
existing translators (including this one currently) will do
the wrong thing with e-mail addresses or URLs when wrapped
in L<>, so don't do that.
For additional information that may be more accurate for
your specific system, see either man(5) or man(7) depending
on your system manual section numbering conventions.
SEE ALSO
Pod::Man, Pod::Parser, man(1), nroff(1), podchecker(1),
troff(1), man(7)
The man page documenting the an macro set may be man(5)
instead of man(7) on your system.
The current version of this script is always available from
its web site at
<http://www.eyrie.org/~eagle/software/podlators/>. It is
also part of the Perl core distribution as of 5.6.0.
AUTHOR
Russ Allbery <rra@stanford.edu>, based very heavily on the
original pod2man by Larry Wall and Tom Christiansen. Large
portions of this documentation, particularly the sections on
the anatomy of a proper man page, are taken from the pod2man
documentation by Tom.
COPYRIGHT AND LICENSE
Copyright 1999, 2000, 2001 by Russ Allbery
<rra@stanford.edu>.
This program is free software; you may redistribute it
and/or modify it under the same terms as Perl itself.
perl v5.8.8 2006-06-30 9