pam_mount(8)pam_mount 2.14 pam_mount(8)Namepam_mount - A PAM module that can mount volumes for a user session
Overview
This module is aimed at environments with central file servers that a
user wishes to mount on login and unmount on logout, such as
(semi-)diskless stations where many users can logon and where stati‐
cally mounting the entire /home from a server is a security risk, or
listing all possible volumes in /etc/fstab is not feasible.
· Users can define their own list of volumes without having to change
(possibly non-writable) global config files.
· Single sign-on feature - the user needs to type the password just
once (at login)
· Transparent mount process
· No stored passwords
· Volumes are unmounted on logout, freeing system resources and not
leaving data exposed.
The module also supports mounting local filesystems of any kind the
normal mount utility supports, with extra code to make sure certain
volumes are set up properly because often they need more than just a
mount call, such as encrypted volumes. This includes SMB/CIFS, FUSE,
dm-crypt and LUKS.
If you intend to use pam_mount to protect volumes on your computer
using an encrypted filesystem system, please know that there are many
other issues you need to consider in order to protect your data. For
example, you probably want to disable or encrypt your swap partition
(the cryptoswap can help you do this). Do not assume a system is secure
without carefully considering potential threats.
Configuration
The primary configuration file for the pam_mount module is
pam_mount.conf.xml. On most platforms this file is read from
/etc/security/pam_mount.conf.xml. On OpenBSD pam_mount reads its con‐
figuration file from /etc/pam_mount.conf.xml. See pam_mount.conf(5)
documenting its use.
Individual users may define additional volumes to mount if allowed by
pam_mount.conf.xml (usually ~/.pam_mount.conf.xml). The volume keyword
is the only valid keyword in these per-user configuration files. If the
luserconf parameter is set in pam_mount.conf.xml, allowing user-defined
volume, then users may mount and unmount any volume they own at any
mount point they own. On some filesystem configurations this may be a
security flaw so user-defined volumes are not allowed by the example
pam_mount.conf.xml distributed with pam_mount.
PAM configuration
In addition, you must include two entries in the system's applicable
/etc/pam.d/service config files, as the following example shows:
auth required pam_securetty.so
auth required pam_pwdb.so shadow nullok
auth required pam_nologin.so
+++ auth optional pam_mount.so
account required pam_pwdb.so
password required pam_cracklib.so
password required pam_pwdb.so shadow nullok use_authtok
session required pam_pwdb.so
session optional pam_console.so
+++ session optional pam_mount.so
When "sufficient" is used in the second column, you must make sure that
pam_mount is added before this entry. Otherwise pam_mount will not get
executed should a previous PAM module succeed. Also be aware of the
"include" statements. These make PAM look into the specified file. If
there is a "sufficient" statement, then the pam_mount entry must either
be in the included file before the "sufficient" statement or before the
"include" statement.
If you use pam_ldap, pam_winbind, or any other authentication services
that make use of PAM's sufficient keyword, model your configuration on
the following order:
···
account sufficient pam_ldap.so
auth required pam_mount.so
auth sufficient pam_ldap.so use_first_pass
auth required pam_unix.so use_first_pass
session optional pam_mount.so
···
This allows for:
1. pam_mount, as the first "auth" module, will prompt for a password
and export it to the PAM system.
2. pam_ldap will use the password from the PAM system to try and
authenticate the user. If this succedes, the user will be authenti‐
cated. If it fails, pam_unix will try to authenticate.
3. pam_unix will try to authenticate the user if pam_ldap failed. If
pam_unix fails, then the authentication will be refused (due to the
"required").
Alternatively, the following is possible (thanks to Andrew Morgan for
the hint!):
auth [success=2 default=ignore] pam_unix2.so
auth [success=1 default=ignore] pam_ldap.so use_first_pass
auth requisite pam_deny.so
auth optional pam_mount.so
It may seem odd, but the first three lines will make it so that at
least one of pam_unix2 or pam_ldap has to succeed. As you can see,
pam_mount will be run after successful authentification with these sub‐
systems.
Encrypted diskspam_mount supports a few types of crypto. The most common are encfs,
dm-crypt and dm-crypt+LUKS.
The first one uses the FUSE layer; files within the encfs container are
stored as single encrypted files on the host in a previously-existing
directory. If you store lots of files, it is recommended to have a
lower filesystem that is strong in this area, such as xfs, but some
software and/or your partitioning decisions may force you to use a dif‐
ferent fs. The 1:1 mapping of files also allows encrypted files to be
reasonably efficiently rsync'ed for example without having to open the
encrypted container. Creation is done through the encfs(1) tool.
dm-crypt provides whole-filesystem/entire-partition encryption. You can
also create a container file, but the idea is that it is represented as
a block device on which you still have to create a filesystem. In fact,
this way you can select a filesystem of your choice. The downside is
that shrinking is often not possible (there is no such issue in encfs
because it uses the lower fs). Suitable dm-crypt containers (and auxil‐
iary files), using block devices or plain files, can be created using
the pmt-ehd(8) tool.
pmt-ehd creates filesystem key material which is a bunch of random
bytes that will be used to en-/decrypt the volume. This material itself
is encrypted with your own password - this is done so that you can
change the password without having to reencrypt all of your data.
LUKS is an extension for dm-crypt to support multi-password containers.
Unless you specifically need it, the above two solutions are recom‐
mended.
NOTE: The key file that pmt-ehd(8) will create represents the filesys‐
tem key material as encrypted with your password. It is thus safe to
store this on an unsecured filesystem.
Troubleshooting
To ensure that your system and, possibly, the remote server are all
properly configured, you should try to mount all or some of the volumes
by hand, using the same commands and mount points provided in
pam_mount.conf.xml. This will save you a lot of grief, since it is more
difficult to debug the mounting process via pam_mount.
If you can mount the volumes by hand but it is not happening via
pam_mount, you may want to enable the "debug" option in
pam_mount.conf.xml to see what is happening.
Verify if the user owns the mount point and has sufficient permissions
over that. pam_mount will verify this and will refuse to mount the
remote volume if the user does not own that directory.
If pam_mount is having trouble unmounting volumes upon logging out,
enable the debug variable. This causes pam_mount to run ofl on logout
and write its output to the system's log.
Authors
W. Michael Petullo
Jan Engelhardt (current maintainer)
Community Support
The following two forms of communication are available. The maintainer
has no preference, though you will reach more users who could answer by
means of the mailing list.
Mailing List:
http://sf.net/mail/?group_id=41452
Bug Tracker (no registration needed):
http://sf.net/tracker/?group_id=41452
pam_mount 2.14 2013-08-27 pam_mount(8)
