named-checkzone(1M) System Administration Commands named-checkzone(1M)NAME
named-checkzone, named-compilezone - zone file validity checking or
converting tool
SYNOPSISnamed-checkzone [-Ddhjqv] [-c class] [-F format] [-f format]
[-i mode] [-k mode] [-M mode] [-m mode] [-n mode]
[-o filename] [-S mode] [-s style] [-t directory]
[-W mode] [-w directory] zonename filename
named-compilezone [-Ddjqv] [-C mode] [-c class] [-F format]
[-f format] [-i mode] [-k mode] [-m mode] [-n mode]
[-o filename] [-s style] [-t directory]
[-W mode] [-w directory] zonename filename
DESCRIPTION
The named-checkzone utility checks the syntax and integrity of a zone
file. It performs the same checks as named(1M) does when loading a
zone. The named-checkzone utility is useful for checking zone files
before configuring them into a name server.
named-compilezone is similar to named-checkzone, differing in that it
always dumps the zone contents to a specified file in a specified for‐
mat. Additionally, it applies stricter check levels by default, since
the dump output will be used as an actual zone file loaded by
named(1M). Unless manually specified otherwise, the check levels must
be at least as strict as those specified in the named configuration
file.
OPTIONS
For either or both utilities, the following options are supported:
-c class
Specify the class of the zone. If not specified, "IN" is assumed.
-D
Dump zone file in canonical format.
-d
Enable debugging.
-F format
Specify the format of the output file specified. Possible formats
are text (default) and raw. For named-checkzone, this does not
cause any effects unless it dumps the zone contents.
-f format
Specify the format of the zone file. Possible formats are text
(default) and raw.
-h
Display usage message for named-checkzone.
-i mode
Perform post-load zone integrity checks. Possible modes are full
(default), full-sibling, local, local-sibling, and none.
Mode full checks that MX records refer to the A or AAAA record
(both in-zone and out-of-zone hostnames). Mode local checks only MX
records that refer to in-zone hostnames.
Mode full checks that SRV records refer to the A or AAAA record
(both in-zone and out-of-zone hostnames). Mode local checks only
SRV records that refer to in-zone hostnames.
Mode full checks that delegation NS records refer to A or AAAA
record (both in-zone and out-of-zone hostnames). It also checks
that glue address records in the zone match those advertised by the
child. Mode local checks only NS records that refer to in-zone
hostnames or check that some required glue exists, that is, when
the nameserver is in a child zone.
Mode full-sibling and local-sibling disable sibling glue checks,
but are otherwise the same as full and local, respectively.
Mode none disables the checks.
-k mode
Perform "check-name" checks with the specified failure mode. Possi‐
ble modes are fail (default for named-compilezone), warn (default
for named-checkzone) and ignore.
-j
Read the journal, if it exists, when loading the zone file.
-M mode
Check if an MX record refers to a CNAME. Possible modes are fail,
warn (default) and ignore.
-m mode
Specify whether MX records should be checked to see if they are
addresses. Possible modes are fail, warn (default) and ignore.
-n mode
Specify whether NS records should be checked to see if they are
addresses. Possible modes are fail (default for named-compilezone),
warn (default for named-checkzone) and ignore.
-o filename
Write zone output to filename. If filename is - (a hyphen), then
write to standard out. The hyphen mandatory for named-compilezone
-q
Run in quiet mode, reporting only the exit status.
-S mode
Check if a SRV record refers to a CNAME. Possible modes are fail,
warn (default) and ignore.
-s style
Specify the style of the dumped zone file. Possible styles are full
(default) and relative. The full format is most suitable for pro‐
cessing automatically by a separate script. The relative format is
more human-readable and is thus suitable for editing by hand. For
named-checkzone this option does not cause any effects unless it
dumps the zone contents. It also has no effect if the output format
is not text.
-t directory
chroot to directory so that include directives in the configuration
file are processed as if run by a similarly chrooted named.
-v
Print the version of the named-checkzone program and exit.
-W mode
Specify whether to check for non-terminal wildcards. Non-terminal
wildcards are almost always the result of a failure to understand
the wildcard matching algorithm (RFC 1034). Possible modes are warn
(default) and ignore.
-w directory
chdir to directory so that relative filenames in master file
$INCLUDE directives work. This is similar to the directory clause
in named.conf.
OPERANDS
The following operands are supported:
filename
The name of the zone file.
zonename
The domain name of the zone being checked.
EXIT STATUS
0
No errors were detected.
1
An error was detected.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Availability │service/network/dns/bind │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │Volatile │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOnamed(1M), named-checkconf(1M), attributes(5)
RFC 1035
See the BIND 9 Administrator's Reference Manual. As of the date of pub‐
lication of this man page, this document is available at
https://www.isc.org/software/bind/documentation.
SunOS 5.10 11 Jan 2010 named-checkzone(1M)