devinfo(1M) System Administration Commands devinfo(1M)NAMEdevinfo - print device specific information
SYNOPSIS
/usr/sbin/devinfo -i device
/usr/sbin/devinfo -p device
DESCRIPTION
The devinfo command is used to print device specific information about
disk devices on standard out. The command can only be used by the supe‐
ruser.
OPTIONS-i Prints the following device information:
· Device name
· Software version (not supported and prints as 0)
· Drive id number (not supported and prints as 0)
· Device blocks per cylinder
· Device bytes per block
· Number of device partitions with a block size greater
than zero
-p Prints the following device partition information:
· Device name
· Device major and minor numbers (in hexadecimal)
· Partition start block
· Number of blocks allocated to the partition
· Partition flag
· Partition tag
This command is used by various other commands to obtain device spe‐
cific information for the making of file systems and determining par‐
tition information. If the device cannot be opened, an error message
is reported.
OPERANDS
device Device name.
EXIT STATUS
0 Successful operation.
2 Operation failed.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Availability │SUNWcsu │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOprtvtoc(1M), attributes(5)SunOS 5.10 8 May 1997 devinfo(1M)