atmstat(1M)atmstat(1M)NAMEatmstat - display status information for SGI ATM OC-3c port.
SYNOPSISatmstat [ -i<port#> ] [ -avsrtSdqVo ]
atmstat [ -i<port#> ] -C (Origin/Onyx2 only)
DESCRIPTION
The atmstat command displays operational statistics of SGI ATM OC-3c
ports. The following options control which statistics atmstat will
display:
-s Display the port state only (PRE-INIT, DOWN, or UP).
-r Display receive and reassembly statistics.
-t Display transmit and segmentation statistics.
-S Display SONET statistics only.
-a Display receive, transmit, and SONET statistics.
-d Display ATM driver statistics.
-q Display the current transmit rate queue settings (Challenge and Onyx
only).
-V Display a table of all the currently active virtual circuits.
-o Display PHY option bit settings. See atmconfig(1m) for more
information on these bits.
-C Display statistics in dynamic "full screen" mode (Origin and Onyx2
only).
The following options modify the behavior of atmstat. They have the
following meanings:
-i<port#>
Specifies a particular ATM port by port number. The default is port
0 (i.e. /hw/atm/0).
-v (verbose) Expand on the meaning of individual bits when displaying
FFRED(Challenge/Onyx), RFRED(Challenge/Onyx), and SONET status
registers. Also, forces printing of internal driver statistics when
used with the -d option.
SEE ALSOatm(7M), atmarp(1M), atmconfig(1M), atmtest(1M)
Page 1