Net::libnetFAQ man page on Archlinux

Man page or keyword search:  
man Server   11224 pages
apropos Keyword Search (all sections)
Output format
Archlinux logo
[printable version]

Net::libnetFAQ(3perl)  Perl Programmers Reference Guide	 Net::libnetFAQ(3perl)

       libnetFAQ - libnet Frequently Asked Questions

   Where to get this document
       This document is distributed with the libnet distribution, and is also
       available on the libnet web page at

   How to contribute to this document
       You may mail corrections, additions, and suggestions to me

Author and Copyright Information
       Copyright (c) 1997-1998 Graham Barr. All rights reserved.  This
       document is free; you can redistribute it and/or modify it under the
       terms of the Artistic License.

       This information is offered in good faith and in the hope that it may
       be of use, but is not guaranteed to be correct, up to date, or suitable
       for any particular purpose whatsoever.  The authors accept no liability
       in respect of this information or its use.

Obtaining and installing libnet
   What is libnet ?
       libnet is a collection of perl5 modules which all related to network
       programming. The majority of the modules available provided the client
       side of popular server-client protocols that are used in the internet

   Which version of perl do I need ?
       libnet has been know to work with versions of perl from 5.002 onwards.
       However if your release of perl is prior to perl5.004 then you will
       need to obtain and install the IO distribution from CPAN. If you have
       perl5.004 or later then you will have the IO modules in your
       installation already, but CPAN may contain updates.

   What other modules do I need ?
       The only modules you will need installed are the modules from the IO
       distribution. If you have perl5.004 or later you will already have
       these modules.

   What machines support libnet ?
       libnet itself is an entirely perl-code distribution so it should work
       on any machine that perl runs on. However IO may not work with some
       machines and earlier releases of perl. But this should not be the case
       with perl version 5.004 or later.

   Where can I get the latest libnet release
       The latest libnet release is always on CPAN, you will find it in

       The latest release and information is also available on the libnet web
       page at

Using Net::FTP
   How do I download files from an FTP server ?
       An example taken from an article posted to comp.lang.perl.misc


	   # a module making life easier

	   use Net::FTP;

	   # for debugging: $ftp = Net::FTP->new('site','Debug',10);
	   # open a connection and log in!

	   $ftp = Net::FTP->new('');

	   # set transfer mode to binary


	   # change the directory on the ftp site


	   foreach $name ('file1', 'file2', 'file3') {

	   # get's arguments are in the following order:
	   # ftp server's filename
	   # filename to save the transfer to on the local machine
	   # can be simply used as get($name) if you want the same name


	   # ftp done!


   How do I transfer files in binary mode ?
       To transfer files without <LF><CR> translation Net::FTP provides the
       "binary" method


   How can I get the size of a file on a remote FTP server ?
   How can I get the modification time of a file on a remote FTP server ?
   How can I change the permissions of a file on a remote server ?
       The FTP protocol does not have a command for changing the permissions
       of a file on the remote server. But some ftp servers may allow a chmod
       command to be issued via a SITE command, eg

	   $ftp->quot('site chmod 0777',$filename);

       But this is not guaranteed to work.

   Can I do a reget operation like the ftp command ?
   How do I get a directory listing from an FTP server ?
   Changing directory to "" does not fail ?
       Passing an argument of "" to ->cwd() has the same affect of calling
       ->cwd() without any arguments. Turn on Debug (See below) and you will
       see what is happening

	   $ftp = Net::FTP->new($host, Debug => 1);


	   Net::FTP=GLOB(0x82196d8)>>> CWD /
	   Net::FTP=GLOB(0x82196d8)<<< 250 CWD command successful.

   I am behind a SOCKS firewall, but the Firewall option does not work ?
       The Firewall option is only for support of one type of firewall. The
       type supported is an ftp proxy.

       To use Net::FTP, or any other module in the libnet distribution,
       through a SOCKS firewall you must create a socks-ified perl executable
       by compiling perl with the socks library.

   I am behind an FTP proxy firewall, but cannot access machines outside ?
       Net::FTP implements the most popular ftp proxy firewall approach. The
       scheme implemented is that where you log in to the firewall with

       I have heard of one other type of firewall which requires a login to
       the firewall with an account, then a second login with "user@hostname".
       You can still use Net::FTP to traverse these firewalls, but a more
       manual approach must be taken, eg

	   $ftp = Net::FTP->new($firewall) or die $@;
	   $ftp->login($firewall_user, $firewall_passwd) or die $ftp->message;
	   $ftp->login($ext_user . '@' . $ext_host, $ext_passwd) or die $ftp->message.

   My ftp proxy firewall does not listen on port 21
       FTP servers usually listen on the same port number, port 21, as any
       other FTP server. But there is no reason why this has to be the case.

       If you pass a port number to Net::FTP then it assumes this is the port
       number of the final destination. By default Net::FTP will always try to
       connect to the firewall on port 21.

       Net::FTP uses IO::Socket to open the connection and IO::Socket allows
       the port number to be specified as part of the hostname. So this
       problem can be resolved by either passing a Firewall option like
       "hostname:1234" or by setting the "ftp_firewall" option in Net::Config
       to be a string in in the same form.

   Is it possible to change the file permissions of a file on an FTP server ?
       The answer to this is "maybe". The FTP protocol does not specify a
       command to change file permissions on a remote host. However many
       servers do allow you to run the chmod command via the "SITE" command.
       This can be done with


   I have seen scripts call a method message, but cannot find it documented ?
       Net::FTP, like several other packages in libnet, inherits from
       Net::Cmd, so all the methods described in Net::Cmd are also available
       on Net::FTP objects.

   Why does Net::FTP not implement mput and mget methods
       The quick answer is because they are easy to implement yourself. The
       long answer is that to write these in such a way that multiple
       platforms are supported correctly would just require too much code.
       Below are some examples how you can implement these yourself.

       sub mput {
	 my($ftp,$pattern) = @_;
	 foreach my $file (glob($pattern)) {
	   $ftp->put($file) or warn $ftp->message;
	 } }

       sub mget {
	 my($ftp,$pattern) = @_;
	 foreach my $file ($ftp->ls($pattern)) {
	   $ftp->get($file) or warn $ftp->message;
	 } }

Using Net::SMTP
   Why can't the part of an Email address after the @ be used as the hostname
       The part of an Email address which follows the @ is not necessarily a
       hostname, it is a mail domain. To find the name of a host to connect
       for a mail domain you need to do a DNS MX lookup

   Why does Net::SMTP not do DNS MX lookups ?
       Net::SMTP implements the SMTP protocol. The DNS MX lookup is not part
       of this protocol.

   The verify method always returns true ?
       Well it may seem that way, but it does not. The verify method returns
       true if the command succeeded. If you pass verify an address which the
       server would normally have to forward to another machine, the command
       will succeed with something like

	   252 Couldn't verify <someone@there> but will attempt delivery anyway

       This command will fail only if you pass it an address in a domain the
       server directly delivers for, and that address does not exist.

Debugging scripts
   How can I debug my scripts that use Net::* modules ?
       Most of the libnet client classes allow options to be passed to the
       constructor, in most cases one option is called "Debug". Passing this
       option with a non-zero value will turn on a protocol trace, which will
       be sent to STDERR. This trace can be useful to see what commands are
       being sent to the remote server and what responses are being received


	   use Net::FTP;

	   my $ftp = new Net::FTP($host, Debug => 1);

       this script would output something like

	Net::FTP: Net::FTP(2.22)
	Net::FTP:   Exporter
	Net::FTP:   Net::Cmd(2.0801)
	Net::FTP:   IO::Socket::INET
	Net::FTP:     IO::Socket(1.1603)
	Net::FTP:	IO::Handle(1.1504)

	Net::FTP=GLOB(0x8152974)<<< 220 imagine FTP server (Version wu-2.4(5) Tue Jul 29 11:17:18 CDT 1997) ready.
	Net::FTP=GLOB(0x8152974)>>> user gbarr
	Net::FTP=GLOB(0x8152974)<<< 331 Password required for gbarr.
	Net::FTP=GLOB(0x8152974)>>> PASS ....
	Net::FTP=GLOB(0x8152974)<<< 230 User gbarr logged in.  Access restrictions apply.
	Net::FTP=GLOB(0x8152974)>>> QUIT
	Net::FTP=GLOB(0x8152974)<<< 221 Goodbye.

       The first few lines tell you the modules that Net::FTP uses and their
       versions, this is useful data to me when a user reports a bug. The last
       seven lines show the communication with the server. Each line has three
       parts. The first part is the object itself, this is useful for
       separating the output if you are using multiple objects. The second
       part is either "<<<<" to show data coming from the server or
       ">>>>" to show data going to the server. The remainder of the
       line is the command being sent or response being received.

       Copyright (c) 1997 Graham Barr.	All rights reserved.

perl v5.18.2			  2014-01-06		 Net::libnetFAQ(3perl)

List of man pages available for Archlinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome
Free Shell Accounts :: the biggest list on the net