KDC man page on Alpinelinux

Man page or keyword search:  
man Server   18016 pages
apropos Keyword Search (all sections)
Output format
Alpinelinux logo
[printable version]

KDC(8)			  BSD System Manager's Manual			KDC(8)

NAME
     kdc — Kerberos 5 server

SYNOPSIS
     kdc [-c file | --config-file=file] [-p | --no-require-preauth]
	 [--max-request=size] [-H | --enable-http] [--no-524] [--kerberos4]
	 [--kerberos4-cross-realm] [-r string | --v4-realm=string] [-P
	 portspec | --ports=portspec] [--detach] [--disable-des]
	 [--addresses=list of addresses]

DESCRIPTION
     kdc serves requests for tickets.  When it starts, it first checks the
     flags passed, any options that are not specified with a command line flag
     are taken from a config file, or from a default compiled-in value.

     Options supported:

     -c file, --config-file=file
	     Specifies the location of the config file, the default is
	     /var/heimdal/kdc.conf.  This is the only value that can't be
	     specified in the config file.

     -p, --no-require-preauth
	     Turn off the requirement for pre-autentication in the initial AS-
	     REQ for all principals.  The use of pre-authentication makes it
	     more difficult to do offline password attacks.  You might want to
	     turn it off if you have clients that don't support pre-authenti‐
	     cation.  Since the version 4 protocol doesn't support any pre-
	     authentication, serving version 4 clients is just about the same
	     as not requiring pre-athentication.  The default is to require
	     pre-authentication.  Adding the require-preauth per principal is
	     a more flexible way of handling this.

     --max-request=size
	     Gives an upper limit on the size of the requests that the kdc is
	     willing to handle.

     -H, --enable-http
	     Makes the kdc listen on port 80 and handle requests encapsulated
	     in HTTP.

     --no-524
	     don't respond to 524 requests

     --kerberos4
	     respond to Kerberos 4 requests

     --kerberos4-cross-realm
	     respond to Kerberos 4 requests from foreign realms.  This is a
	     known security hole and should not be enabled unless you under‐
	     stand the consequences and are willing to live with them.

     -r string, --v4-realm=string
	     What realm this server should act as when dealing with version 4
	     requests.	The database can contain any number of realms, but
	     since the version 4 protocol doesn't contain a realm for the
	     server, it must be explicitly specified.  The default is whatever
	     is returned by krb_get_lrealm().  This option is only available
	     if the KDC has been compiled with version 4 support.

     -P portspec, --ports=portspec
	     Specifies the set of ports the KDC should listen on.  It is given
	     as a white-space separated list of services or port numbers.

     --addresses=list of addresses
	     The list of addresses to listen for requests on.  By default, the
	     kdc will listen on all the locally configured addresses.  If only
	     a subset is desired, or the automatic detection fails, this
	     option might be used.

     --detach
	     detach from pty and run as a daemon.

     --disable-des
	     disable add des encryption types, makes the kdc not use them.

     All activities are logged to one or more destinations, see krb5.conf(5),
     and krb5_openlog(3).  The entity used for logging is kdc.

CONFIGURATION FILE
     The configuration file has the same syntax as krb5.conf(5), but will be
     read before /etc/krb5.conf, so it may override settings found there.
     Options specific to the KDC only are found in the “[kdc]” section.	 All
     the command-line options can preferably be added in the configuration
     file.  The only difference is the pre-authentication flag, which has to
     be specified as:

	   require-preauth = no

     (in fact you can specify the option as --require-preauth=no).

     And there are some configuration options which do not have command-line
     equivalents:

	   enable-digest = boolean
		turn on support for digest processing in the KDC.  The default
		is FALSE.

	   check-ticket-addresses = boolean
		Check the addresses in the ticket when processing TGS
		requests.  The default is TRUE.

	   allow-null-ticket-addresses = boolean
		Permit tickets with no addresses.  This option is only rele‐
		vant when check-ticket-addresses is TRUE.

	   allow-anonymous = boolean
		Permit anonymous tickets with no addresses.

	   max-kdc-datagram-reply-length = number
		Maximum packet size the UDP rely that the KDC will transmit,
		instead the KDC sends back a reply telling the client to use
		TCP instead.

	   transited-policy = always-check | allow-per-principal |
		always-honour-request
		This controls how KDC requests with the
		disable-transited-check flag are handled. It can be one of:

		      always-check
			   Always check transited encoding, this is the
			   default.

		      allow-per-principal
			   Currently this is identical to always-check.	 In a
			   future release, it will be possible to mark a prin‐
			   cipal as able to handle unchecked requests.

		      always-honour-request
			   Always do what the client asked.  In a future
			   release, it will be possible to force a check per
			   principal.

	   encode_as_rep_as_tgs_rep = boolean
		Encode AS-Rep as TGS-Rep to be bug-compatible with old DCE
		code.  The Heimdal clients allow both.

	   kdc_warn_pwexpire = time
		How long before password/principal expiration the KDC should
		start sending out warning messages.

     The configuration file is only read when the kdc is started.  If changes
     made to the configuration file are to take effect, the kdc needs to be
     restarted.

     An example of a config file:

	   [kdc]
		   require-preauth = no
		   v4-realm = FOO.SE

BUGS
     If the machine running the KDC has new addresses added to it, the KDC
     will have to be restarted to listen to them.  The reason it doesn't just
     listen to wildcarded (like INADDR_ANY) addresses, is that the replies has
     to come from the same address they were sent to, and most OS:es doesn't
     pass this information to the application.	If your normal mode of opera‐
     tion require that you add and remove addresses, the best option is proba‐
     bly to listen to a wildcarded TCP socket, and make sure your clients use
     TCP to connect.  For instance, this will listen to IPv4 TCP port 88 only:

	   kdc --addresses=0.0.0.0 --ports="88/tcp"

     There should be a way to specify protocol, port, and address triplets,
     not just addresses and protocol, port tuples.

SEE ALSO
     kinit(1), krb5.conf(5)

HEIMDAL				August 24, 2006			       HEIMDAL
[top]

List of man pages available for Alpinelinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net