XMCD(1)XMCD(1)NAMExmcd - CD digital audio player utility for X11/Motif
SYNOPSISxmcd [toolkitoption ...] [-dev device] [-instcmap] [-remote] [-rmthost
hostname] [-help] [-debug level#] [-c device] [-X] [-o] [command [arg
...]]
DESCRIPTION
Xmcd is a program that allows the use of the CD-ROM, CD-R, CD-RW or DVD
drive as a full-featured stereo compact-disc player and "ripper" for
the X window system. See cda(1) for the command-line CD player. xmcd
and cda uses the same configuration and support files.
Most of the features found on "real" CD players are available in xmcd,
such as shuffle and repeat, track programming functions, a numeric
keypad and track warp slider for direct track access. Additional
functions include sample play, A to B segment play, volume control,
balance control, etc. Several automation options are also available on
CD load, eject, play completion and program exit. A Channel Routing
feature allow you to select from several stereo or mono routing
options. The volume control slider taper characteristics can also be
altered.
CDDA (CD digital audio) data extraction, playback, save-to-file, and
pipe-to-program are supported on many platforms. For data extraction
to file or pipe, xmcd can generate the data in MP3 (MPEG-1 layer 3),
MPEG-2/MPEG-4 AAC, MP4, Ogg Vorbis, FLAC, WAV, AU, AIFF, AIFF-C and raw
headerless formats. Simultaneous extraction to file/pipe and real-time
playback is possible on high performance computers.
Multi-disc changers are also supported. There are buttons to switch to
the next or previous disc in the changer, as well as a way to switch to
a specific disc via the keypad. You can select to play only a single
disc or auto-play all discs in normal or reverse order.
The Gracenote CDDB(R) Music Recognition Service(sm) is supported by
xmcd, which allows the CD artist/title and track titles, and other
information associated with the loaded CD to be displayed. You may
also add/modify and submit information to the CDDB service. For CDDA
extraction to MP3, MP4, Ogg Vorbis and FLAC formats, xmcd can auto-fill
the CD information tags embedded in these files.
This release of xmcd supports the enhanced Gracenote CDDB2(R) service
on a number of platforms, and offers much richer features and content
than the "classic" CDDB service. Moreover, CDDB2-supplied information
is now in UTF-8 data format, providing international language support.
See "LOCALIZATION" below.
Xmcd provides the ability to drive a web browser and search for web
sites related to the currently playing CD artist or track. You may
also access online music reviews and go to the official xmcd and
Gracenote web sites, invoke the CDDB Music Browser(tm), as well as
CDDB-provided links to related content. Moreover, the browser
integration gives users the ability to manage Local Discography
information pertaining to their CD collections.
In addition to CDDB, this release of xmcd supports reading CD-TEXT data
from the disc for the disc/track artist and title information.
Full feature-specific pop-up help is available for all controls,
indicators, text input fields, and lists.
On systems with more than one CD drive, multiple invocations of xmcd
can be used to operate each drive independently.
Xmcd is designed to be easy to use, as the main window is purposely
made to resemble a real CD player front panel. All other pop-up
windows are also designed to be as intuitive as possible. Moreover,
while the use of a mouse is natural with xmcd, all functionality can
also be operated via the keyboard. This is in conformance to the
guidelines published in the OSF/Motif Style Guide from the Open
Software Foundation.
Many functions on a running xmcd session can be "remote controlled"
from the command line via the -remote option. See the "OPTIONS"
section below.
The internal architecture of xmcd is designed to be easily portable to
many UNIX operating system variants, and adaptable to the myriad of CD
drives available.
OPTIONS
All standard Xt Intrinsics toolkit options are supported (such as
-display, -geometry.-iconic, etc.). In addition, xmcd supports the
following options:
-dev device
Specifies the path name to the raw CD device. If this option is
not used, the default device to be used is the first drive set
up with the xmcd configuration program (See below).
-help Causes command line usage information to be displayed on stderr.
-debug level#
Causes verbose debugging diagnostics to be displayed on stderr.
The level specifies the type of debugging messages desired:
1 General debugging
2 Device I/O debugging
4 CD information debugging
8 User interface debugging
16 Remote control debugging
32 Sound DSP and output file/pipe debugging
64 Message of the day debugging
You may add the values together to enable multiple debugging
types (i.e., A value of 3 turns on both General and Device I/O
debugging).
-instcmap
Causes xmcd to install its own colormap. This may be desirable
if xmcd is to be used at the same time as other color-intensive
applications, which would otherwise cause xmcd to be unable to
allocate all its needed colors. Note that when running on an X
display that does not support many concurrent colormaps, this
may cause other windows to change colors when xmcd has the input
focus.
-remote
Causes a command to be sent to another running xmcd process.
The command and appropriate arguments are specified at the
invoking shell (or shell script) as command-line arguments,
After the command is delivered, the "sender" xmcd process exits,
and the "receiver" process responds by executing the command.
In effect, the sender becomes a remote control for a running
xmcd session. See "COMMANDS" below for a list of supported
commands.
The sender xmcd process can be invoked on the same host or on a
different host than the receiver xmcd process. By default, the
sender will attempt to locate an xmcd process running on the
same X display (determined by the DISPLAY environment variable
or the -display option), and controlling the same default CD
device. You may specify the device via the -dev option to
override the default. Use of the -dev and -rmthost options on
the sender's command line can resolve ambiguities when there are
multiple xmcd clients displaying on the same X server.
-rmthost hostname
This may be used with the -remote option to specify the host on
which the receiver xmcd client must be running.
-c device (Solaris only)
Same as the -dev option.
-X (Solaris only)
Causes the exitOnEject parameter to be set to True.
-o (Solaris only)
This option has no effect.
The -c, -X and -o options are provided only on the Solaris platform for
compatibility with the action_workman.so auto-startup program, running
under the Solaris Volume Manager (vold). See the PLATFORM file in the
xmcd distribution about configuring xmcd for the Solaris Volume
Manager.
X RESOURCES
Xmcd has many adjustable X resources to customize its look and feel, as
well as its behavior. Notably, the colors of virtually every feature
on xmcd's windows can be changed, as well as the text fonts. All text
labels can also be changed (for example, to another language).
There are too many resources to list here, but the resource names and
their defaults (plus descriptive comments) can be found in the
XMCDLIB/app-defaults/XMcd file (where XMCDLIB is the xmcd library
directory specified during installation, typically /usr/lib/X11/xmcd).
It is not recommended that you change values in the XMCDLIB/app-
defaults/XMcd file, unless you want the changes to be forced upon all
users of xmcd on the system. Instead, make a copy of this file, change
the copy as you see fit, then place it in your $HOME/.xmcdcfg
directory. Your custom resource settings will then override the
defaults when xmcd is subsequently started.
COMMANDS
You may specify a command as an xmcd command line argument, to make
xmcd execute the command after initial startup. For example, the
following command starts xmcd and then begins playing at track 4:
xmcd play 4 &
If the -remote option is used, then the command is sent to another
running xmcd process for execution (See "OPTIONS" above).
The supported commands are:
stop Stop playback.
play [track# | min:sec | track#:min:sec]
Start playback. You may also specify the starting track number,
and/or the starting minute and second offset.
pause Pause the playback. You may resume the playback by using either
the pause command again, or the play command.
sample Start sample playback. This will play the first 10 seconds of
each track.
disc <load | eject | prev | next | disc#>
Perform a disc operation: Load or eject the CD, or change to
another disc on a multi-disc changer.
track <prev | next | track#>
Perform a track operation: Change to the previous or next track,
or a specified track number.
index <prev | next>
Perform an index operation: Change to the previous or next
index.
lock <on | off>
Enable or disable the caddy (or disc tray) lock. When enabled,
pressing the eject button on the drive will not eject the CD.
You can only change the lock state when a CD is loaded and is
not playing.
shuffle <on | off>
Enable or disable shuffle (random play) mode. Shuffle can be
enabled in this manner only when playback is not in progress.
When shuffle is enabled, any program sequence is cleared and
segment play is canceled.
repeat <on | off>
Enable or disable repeat mode.
program <clear | save | track# ...>
Clear, save or set a track program sequence. Track numbers may
be space or comma-separated. When a program is set in this
manner, shuffle mode will be disengaged and segment play will be
canceled.
volume <value# | linear | square | invsqr>
Volume control operation. You can specify a numeric value to
set the volume level (The range is 0 to 100), or change the
volume control's taper characteristic: linear, square, or
inverse-square. This control operates the hardware volume
control on the CD drive in Standard playback mode, or the
computer's audio hardware in CDDA playback mode. It has no
effect on the data of the CDDA save to file or CDDA pipe to
program outputs.
balance value#
Balance control. The value should be between 0 and 100. 50 is
center, 0 is full-left, and 100 is full-right. This control
operates the hardware volume control on the CD drive in Standard
playback mode, or the computer's audio hardware in CDDA playback
mode. It has no effect on the data of the CDDA save to file or
CDDA pipe to program outputs.
route <stereo | reverse | mono-l | mono-r | mono | value#>
Channel routing control. Use one of the appropriate keywords,
or a value as follows:
0 Normal stereo
1 Reverse stereo
2 Mono-L
3 Mono-R
4 Mono-L+R
outport <speaker | headphone | line-out | value#>
CDDA playback output port selection. The speaker, headphone and
line-out keywords are toggles. Alternatively, you may specify a
numeric value, as follows:
1 Speaker
2 Headphone
4 Line-out
You may add the values together to enable multiple output ports
(i.e., A value of 3 turns on both Speaker and Headphones). When
the value is set to 0, the port setting is unmodified. Note
that this command may be meaningful only on some platforms, and
only certain ports may be available on a particular
architecture. See the PLATFORM file for details.
cdda-att <value#>
CDDA attenuator level. The valid range is 0 to 100. Note that
in contrast to the volume command, this setting does not operate
any hardware. It works by scaling the CDDA audio samples, and
thus has no effect in Standard playback mode, but affects all
CDDA modes (CDDA playback, CDDA save to file and CDDA pipe to
program).
time <elapse | e-seg | e-disc | r-trac | r-seg | r-disc>
Change the time display mode. Select from elapsed track time,
elapsed segment time, elapsed disc time, remaining track time,
remaining segment time or remaining disc time.
on-load <none | spindown | autoplay | autolock | noautolock>
Enable or disable options when a CD is loaded. The spindown
option will cause the CD to stop after loading to conserve the
laser and motor. The autoplay option will cause the CD to
automatically start playing after loading. The autolock option
causes the caddy or disc tray to be automatically locked. The
none, spindown and autoplay options are mutually-exclusive.
on-exit <none | autostop | autoeject>
Enable or disable options when xmcd exits. The autostop option
will cause xmcd to stop playback, and the autoeject option will
cause xmcd to eject the CD. Use none to cancel these options.
on-done <autoeject | noautoeject | autoexit | noautoexit>
Enable or disable options when xmcd is done with playback. The
autoeject option causes xmcd to eject the CD. The autoexit
option will cause xmcd to exit.
on-eject <autoexit | noautoexit>
Enable or disable options when xmcd ejects a CD. The autoexit
option will cause xmcd to exit after ejecting the CD.
changer <multiplay | nomultiplay | reverse | noreverse>
Enable or disable multi-disc changer options. The multiplay
option specifies that xmcd plays all discs in sequence. The
nomultiplay option will cause xmcd to stop after the current
disc is done. The reverse option implies multiplay, except that
the disc order is reversed.
mode <standard | cdda-play | cdda-save | cdda-pipe>
Selects the playback mode. See "PLAYBACK MODES" below for
details about the modes.
jittercorr <on | off>
Enable or disable CDDA jitter correction.
trackfile <on | off>
For CDDA save to file mode, specifies whether a separate file
should be created for each CD track.
subst <on | off>
For CDDA save to file mode, specifies whether space and tab
characters in the output file path name should be substituted
with underscores ('_'). This makes the files easier to
manipulate while using the UNIX command shell.
filefmt <format>
Specifies the output audio file format if running in CDDA save
to file or CDDA pipe to program modes. The format is one of the
following: raw, au, wav, aiff, aiff-c, mp3, ogg, flac, aac or
mp4.
outfile <template>
Specifies the output audio file path name template if running in
CDDA save to file mode. See the help file for the CDDA output
file path template text box for a description on the special
tokens that could be used in the template.
pipeprog <path [arg ...]>
Specifies the external program to which the audio stream will be
piped to when running in CDDA pipe to program mode.
compress <<0 | 3> [bitrate#] | <1 | 2> [qual#]>
Selects the compression mode for compressed file formats, as
follows:
For MP3, the modes are as follows:
0 Constant bitrate (CBR)
1 Variable bitrate (VBR, old algorithm)
2 Variable bitrate (VBR, new algorithm, faster)
3 Average bit rate (ABR)
For Ogg Vorbis and MP4, all modes are VBR, as follows:
0, 3 Use an average bit rate
1, 2 Use a quality factor
For FLAC, the modes are as follows:
0 None
1 Enable exhaustive LP coefficient quant. search
2 Enable encoding correctness verification
3 Enable both
For AAC, all modes are VBR, as follows:
0 Use an average bit rate, MPEG-2
1 Use a quality factor, MPEG-2
2 Use a quality factor, MPEG-4
3 Use an average bit rate, MPEG-4
For modes 0 and 3, an optional bitrate (in kb/s) sub-argument
can be specified. The supported bitrates are a discrete set of
numbers from 32 to 320. A value of 0 can also be used to
indicate the use of an internal default. For modes 1 and 2, an
optional quality factor (from 1 to 10) sub-argument can be used.
Lower bitrates and quality factor values yield smaller files
whereas higher numbers produce higher audio quality. For AAC
and MP4 formats, the bitrate you specify will be double the
actual bitrate (e.g., if you specify 128kbps, the actual bitrate
used will be 64kbps). The bitrate or quality values, if
specified, are ignored for the FLAC format.
min-brate <bitrate#>
In average bitrate and variable bitrate modes, this commands
lets you specify a low bitrate limit. The encoder will not drop
below this limit while dynamically changing the bitrate. A
value of 0 can be specified to indicate the use of an internal
default. This parameter has no effect on the FLAC, AAC or MP4
format.
max-brate <bitrate#>
In average bitrate and variable bitrate modes, this commands
lets you specify a high bitrate limit. The encoder will not go
above this limit while dynamically changing the bitrate. A
value of 0 can be specified to indicate the use of an internal
default. This parameter has no effect on the FLAC, AAC or MP4
format.
coding <stereo | j-stereo | force-ms | mono | algo#>
This command selects the stereo mode and encoding noise-
shaping/psychoacoustics algorithm.
For MP3, the algorithm is a number from 1 to 10. Lower numbers
gives faster encoding whereas higher numbers produce higher
audio quality.
For AAC and MP4, stereo disables the mid/side coding, j-stereo
and force-ms are synonymous, and mono is not supported. An
algorithm value of 10 enables temporal noise shaping (TNS).
For FLAC, the stereo modes have no effect, but the algorithm
value selects between faster encoding versus slightly better
compression.
For Ogg Vorbis, this parameter has no effect.
lowpass <off | auto | freq# [width#]>
This allows a lowpass filter to be added. The off setting means
no filter, the auto setting causes the encoder to determine
whether a filter should be added and its parameters. Specifying
a frequency (and optionally, a width) will enable the filter in
manual mode. The frequency and width are both in Hz. The valid
frequency range is from 16 to 50000 Hz. For MP3, the filter
functions fully as described. For AAC and MP4, the freq can be
used to limit the bandwidth, but the width value is ignored.
For Ogg Vorbis and FLAC, these parameters have no effect.
highpass <off | auto | freq# [width#]>
For encoding to MP3 files, this allows a highpass filter to be
added. The off setting means no filter, the auto setting causes
the encoder to determine whether a filter should be added and
its parameters. Specifying a frequency (and optionally, a
width) will enable the filter in manual mode. The frequency and
width are both in Hz. The valid frequency range is from 500 to
50000 Hz. The lower limit is imposed by the polyphase filter
implementation in the MP3 encoder. For non-MP3 formats, these
parameters have no effect.
flags <[C|c][O|o][P|p][E|e][I|i]>
This allows you to specify some MP3 header and frame flags. The
letter c denotes the "copyright" flag, the letter o denotes the
"original" flag, the letter n denotes the "no res" (disable bit
reservoir) flag, the letter e denotes the addition of a 2-byte
checksum to each frame for error correction, and the letter i
indicates strict ISO compatibility. The use of a upper-case
letter turns on the flag, and lower-case turns off the flag.
Multiple flags may be specified together.
tag <off | v1 | v2 | both>
This command specifies whether CD information (such as album and
track artists and titles, genre type, etc.) should be added to
the CDDA output file. For MP3, the information is added to
either the version 1, version 2 or both versions of the ID3 tag
areas. For Ogg Vorbis, FLAC and MP4, the information is added
to the metadata area. to
Note: An ID3v2 tag will not be added to the CDDA pipe to program
MP3 stream regardless of the setting of this command.
lameopts <<disable | insert | append | replace> [options]>
This command allows you to query or set command line options to
be passed directly to the LAME MP3 encoder, and control how
those options will be passed. This facilitates the use of
advanced or experimental LAME features that cannot otherwise be
invoked via the xmcd graphical user interface for setting
encoding parameters. The following keywords control how the
command line options are to be passed:
disable: No additional command line options are to be passed.
insert: The specified options are to be inserted before the
standard options.
append: The specified options are to be appended after the
standard options.
replace: The specified options are to be used instead of the
standard options.
Standard options refers to the command line options that xmcd
generates, based on the current settings of the controls in the
"Encoding Parameters" options window.
motd Retrieve and display messages from the xmcd MOTD server, if any.
window <modechg | iconify | deiconify | raise | lower>
Xmcd window control. The modechg command causes the main window
to toggle between the normal mode and basic mode. In normal
mode, all controls and indicators are available. In basic mode,
xmcd shrinks to a smaller size and only basic controls are
shown. The iconify, deiconify, raise and lower commands cause
the xmcd window to change as specified.
quit Causes xmcd to exit.
debug <level#>
Set the debug level. When debug level is non-zero, xmcd
generates verbose debugging diagnostics to be displayed on
stderr. See the description for the -debug option above for
supported level values.
Some of these commands, when used in start-up mode, do not perform a
meaningful function. For example, the "track prev" command is not
useful just after xmcd startup. It is more appropriate to use this
command in the remote control mode.
DEVICE CONFIGURATION
The X resources described in the previous section affect the general
appearance and behavior of xmcd. There are two additional
configuration files which are used to adapt xmcd to your site
requirements. The first of these contain common parameters, and the
second contain configurable parameters that must vary on a per-drive
basis. For example, in some cases xmcd must operate the drive
differently depending upon the brand and model of the drive. Thus,
there must be a separate configuration file for these parameters per-
device. The common parameters file is XMCDLIB/config/common.cfg and
the device-specific parameters file is XMCDLIB/config/DEVICE (where
XMCDLIB is typically /usr/lib/X11/xmcd and DEVICE is the base name of
the raw device special file for the CD drive; e.g.,
/usr/lib/X11/xmcd/config/rcd0). A configuration program
XMCDLIB/config/config.sh is provided to make maintaining these
configuration file easy (Note: on SCO UNIX/Open Desktop/Open Server
systems the configuration program can also be invoked as "mkdev xmcd").
You should always use the configuration program to set the
configuration parameters when installing xmcd for the first time, or
when the CD hardware configuration has changed. If this is not done
then xmcd will probably not operate correctly with your CD drive.
WARNING: If xmcd is not correctly configured, you may cause xmcd to
deliver commands that are not supported by your CD drive. Under some
environments this may lead to system hang or crash.
You can override some of the device-specific configuration parameters
by adding your own configuration files. Xmcd will also look in the
$HOME/.xmcdcfg/common.cfg and $HOME/.xmcdcfg/DEVICE files for common
and device-specific parameters (where $HOME is your home directory and
DEVICE is as specified above). Parameters found in this file will
override the system defaults (except those parameters that cannot be
overridden; see the comments in the XMCDLIB/config/device.cfg for
details).
USING XMCD
The basic functions of xmcd are designed to operate the same way as on
a real stereo CD player. The pictorial symbols used on the main window
buttons are intended to illustrate the function in a non-language-
specific manner. If enabled, a small "tooltip" will appear after a
short delay, when you position the mouse cursor over any xmcd main
window feature. The tooltip contains textual description of the
feature.
The CD information and track programming functions are operated via the
CD Information subwindow. You open the subwindow by clicking the CD
Information button (file cabinet symbol) on the main window (See "CD
DATABASE" below).
There is not a per-item description of all the features here, because
full on-line help is available (See "ONLINE HELP" below).
ONLINE HELP
For general information about xmcd, click the wwwWarp (world symbol)
button on the xmcd main window and select 'Xmcd help...' in the menu.
You can also get specific help information about each button, control,
indicator, text entry area, selection list by positioning the mouse
cursor over the desired item, then clicking the third mouse button. A
pop-up window will appear, containing the relevant help text.
TRACK PROGRAMMING
You can program xmcd to play only certain tracks, in a custom sequence.
To do so, invoke the CD Information window (by clicking the CD
Information button on the main window). Select the desired track by
clicking on the entry in the Track list, and click the Add button to
add to the play sequence. Notice that the track number appears in the
Program sequence text field. You can also type the track numbers,
separated with commas or spaces, directly in the Program sequence
field. Repeat until all desired tracks have been entered, then click
the Play/Pause button (on the main window) to start the program play.
When a program sequence is defined, the prog indicator in the main
window display area "illuminates". To erase the program sequence,
click the Clear button on the CD Information window. You may also Save
a program sequence, so that the next time you load the same CD the
program will automatically be applied. The Clear button will also
delete the saved program.
CD DATABASE
Unless explicitly disabled, xmcd will automatically query the Gracenote
CDDB Music Recognition Service for information about the loaded CD.
This information includes the artist/title, track titles, genre, and
much more, and is displayed on the CD Information window and several of
its sub-windows.
You may also add, modify or enhance the displayed information, in the
rare circumstance that CDDB does not have data pertaining to your CD,
or if the CDDB-supplied data is incomplete or in error. You can then
submit the changes back to CDDB.
You should perform a "submit" operation (click the Submit button) after
typing in the changed information before ejecting the CD or exiting, or
the information will be lost.
The CD Information window should prove to be intuitive to use. You may
use the on-line help system to obtain specific help information about
the various buttons and items.
The CD information, once queried from CDDB, is stored in a local cache
and managed by the CDDB library. This reduces unnecessary Internet
connections to the CDDB servers.
This release of xmcd also supports reading the CD-TEXT data from the
disc for CD information. Only some recent CDs are produced with CD-
TEXT data and this data can only be read on CD drives with CD-TEXT
capability.
For backward compatibility, this release of xmcd will also read the
old-style local CD database files previously generated by xmcd versions
1.x and 2.x. No capability is retained in this release to write/update
the old-style CD database files.
The priority of the CD information schemes (CDDB, CD-TEXT or local CD
database files) is controlled via the cdinfoPath parameter in the
common.cfg file.
For more information about Gracenote CDDB, read the CDDB file included
with this release, and visit the http://www.cddb.com web site for
details.
While xmcd is running, the file /tmp/.cdaudio/curr.nnnn (where nnnn is
the hexadecimal representation of the CD drive's device number)
contains the device node path, the music genre, and disc identification
information pertaining to the currently loaded CD. Other applications
may read this file to identify the currently loaded disc.
PLAYBACK MODES
This release supports the following user-selectable playback modes (via
the Options pop-up window):
Standard playback
When playing an audio CD, the audio output is the analog "line
out" connection on the back of your CD drive. There should be
an audio cable connecting this output to your computer audio
hardware CD input (or to an externally amplfied speaker or
stereo system). The audio output is also available at the CD
drive's front panel headphone connection, if so equipped. The
volume control slider bar on xmcd affect the CD drive's built-in
volume control, if the drive has such controls. This is the
mode that previous releases (xmcd version 1.x through 3.0)
supported.
CDDA playback
When playing a CD in this mode, xmcd extracts the CD digital
audio data off the CD drive over the data cable (e.g., SCSI or
ATAPI/IDE). Then, it sends the data to the DSP (digital signal
processor) device in your computer's audio hardware for real-
time playback. The audio is typically heard through the
computer's built-in speakers. No signal is produced at the
line-out or headphone connections of the CD drive. The xmcd
volume control slider bar affects the computer's DSP device.
CDDA save to file
When playing a CD in this mode, xmcd extracts the CD digital
audio data off the CD drive over the data cable (e.g., SCSI or
ATAPI/IDE). Then, it writes the data into a file of your
choosing. The xmcd volume control slider does not affect the
data written to the output file. The output file format can be
selected to be one of the following:
Format Ext Description
------ ----- ---------------------------------------
RAW .raw Little-endian, 16 bit, 44.1 kHz, stereo
AU .au Big-endian, 16 bit, 44.1 kHz, stereo
WAV .wav Little-endian, 16 bit, 44.1 kHz, stereo
AIFF .aiff Big-endian, 16 bit, 44.1 kHz, stereo
AIFF-C .aifc Big-endian, 16 bit, 44.1 kHz, stereo
MP3 .mp3 MPEG 1.0 Layer III compressed
Ogg .ogg Ogg Vorbis compressed
FLAC .flac Free Lossless Audio CODEC compressed
AAC .aac AAC (MPEG-2 or MPEG-4) compressed
MP4 .mp4 MP4 (MPEG-4) compressed
The file can be played later using an appropriate playback
utility, or converted to another format. This mode will
typically run faster than real-time with the non-compressed
formats. With the compressed formats, it depends on the CPU
performance of your system.
CDDA pipe to program
When playing a CD in this mode, xmcd extracts the CD digital
audio data off the CD drive over the data cable (e.g., SCSI or
ATAPI/IDE). Then, it pipes the data stream to an external
program that you specify. The output format is selected as in
the CDDA save to file mode. This mode can be used with an
external audio player, encoder, or other digital audio
manipulation program. The external program must be capable of
accepting audio data on its standard input, in one of the
formats listed above.
More than one of the three CDDA modes can be selected at the same time.
For example, if both the CDDA playback and the CDDA save to file
buttons are selected, the two functions will be performed
simultaneously. Note that on most systems, only one program can access
the system's DSP at a time, therefore you will likely not be able to
select CDDA playback and CDDA pipe to program at the same time, where
the external program is itself an audio player.
NOTE: The CDDA (CD digital audio) modes will function only on CD drives
that provides this capability, and only on some OS and hardware
platforms. See the RELNOTES file for details about platform support
and other CDDA related notes.
LOCALIZATION
There is full localization support in xmcd if it is compiled with X11R5
or later header files and libraries.
The "classic" CDDB service supplies data in the ISO Latin-1 format
only, multi-byte characters are not supported.
The CDDB2 service supplies data in UTF-8 data format, which is
identical to US-ASCII for single-byte characters. Multi-byte UTF-8
characters are also supported when xmcd is linked with X11R5 or later.
By default, xmcd will translate the characters to ISO Latin-1 (ISO
8859-1, for English and many European character sets). By changing the
setting of the charsetConvMode parameter in the common.cfg file, you
can have xmcd display the UTF-8 data without conversion (good for US-
ASCII or if you are using UTF-8 fonts), or attempt to convert UTF-8
strings to the default character set as specified by the LANG
environment variable. This conversion will occur only if the system's
list of locales also support UTF-8. As distributed, xmcd is configured
to display in a generic family of X fonts denotes similar to the
following:
-*-helvetica-bold-o-*--14-140-*
This will normally work correctly with English and any ISO Latin-1
European character set, as long as your X display server supports all
the required fonts. To display in other languages, you must set your
LANG environment accordingly, and change xmcd to use the appropriate
fonts. That can be accomplished by modifying the various
XMcd*classname.fontList parameters in the XMCDLIB/app-defaults/XMcd
file (system wide) or your $HOME/.xmcdcfg/XMcd file (per-user). Be
sure that the fonts you specify is actually supported by your X display
server. See xlsfonts(1) and your X window system documentation about
font configuration.
Moreover, all titles and descriptions in xmcd are configurable in the
XMcd X resource file. US-English is distributed by default, but the
file may be modified to use any other language as desired. See "X
RESOURCES" above.
NOTES
Not all platforms and CD drives support all the features of xmcd. For
example, some drives do not support a software-driven volume control.
On these drives the xmcd volume control slider may have no effect, or
in some cases it is made to function as a mute control (i.e., it will
snap to the full-off or full-on positions only). Similarly, the caddy
lock, eject and index search buttons found on xmcd may not have any
effect on drives that do not support the appropriate functionality.
The remote control feature (using the -remote option) is governed by
the standard display server security mechanisms of the X window system.
In order for an xmcd sender client to communicate with a running xmcd
receiver client, the sender must have the appropriate access
permissions to the receiver client's X display. See xhost(1), xauth(1)
and Xsecurity(1) for more information. If logging is enabled, remote
control activity is logged by the xmcd receiver client in the
$HOME/.xmcdcfg/remote.log file for each xmcd user.
The lame(1) MP3 encoder program must be installed on your system in
order for xmcd to perform CD ripping to MP3 format files. Similarly,
the faac(1) encoder program must be installed on your system for the
AAC and MP4 formats.
Your copy of the xmcd executable must be compiled and linked with the
Ogg Vorbis and FLAC encoder libraries in order to perform CD ripping to
these formats. See the INSTALL file for details.
ENVIRONMENT VARIABLES
The LANG environment variable sets the default character set. See
"LOCALIZATION" above.
For the wwwWarp feature, xmcd invokes the Netscape, Mozilla, Galeon or
Opera web browser to display the contents. Xmcd searches a number of
"standard" locations for the web browser executable. If you have
multiple browsers installed and would like to direct xmcd to use a
particular executable, or if your browser executable is installed in a
non-standard location, then you may set the BROWSER_PATH environment
variable on the shell command line to the web browser executable you
desire.
An example:
(For Bourne Shell and Korn Shell users):
BROWSER_PATH=/usr/local/bin/mozilla; export BROWSER_PATH
(For C Shell users):
setenv BROWSER_PATH /usr/local/bin/mozilla
you may put the above command in your $HOME/.profile (sh/ksh) or
$HOME/.cshrc (csh) to set this automatically each time you log in.
The LAME_PATH environment variable may be used to specify the path to
the lame(1) MP3 encoder program.
The FAAC_PATH environment variable may be used to specify the path to
the faac(1) AAC and MP4 encoder program.
The AUDIODEV environment variable may be used to specify an alternate
audio device when running xmcd in the CDDA playback mode. The default
audio device is write method dependent as follows:
AIX write method: /dev/paud0/1 (PCI audio)
AIX write method: /dev/baud0/1 (MCA audio)
ALSA write method: plughw:0,0
HP-UX write method: /dev/audio
Linux/OSS write method: /dev/dsp
OSF1 write method: 0
Solaris write method: /dev/audio
In addition, with the OSS and ALSA write methods, the MIXERDEV
environment variable may be used to specify the PCM mixer channel
device. The default is /dev/mixer for OSS, and default for ALSA.
On FreeBSD with ATAPI CD drives, xmcd will automatically use either the
CDIOCREADAUDIO ioctl or the pread(2) system call for CDDA reads, based
on the running kernel version. You may override the default by setting
the environment variable CDDA_USE_PREAD to 0 or 1, respectively.
Normally this is not necessary.
FILES
$HOME/.cddb2/∗
$HOME/.xmcdcfg/∗
XMCDLIB/app-defaults/XMcd
XMCDLIB/cdinfo/∗
XMCDLIB/discog/∗
XMCDLIB/doc/∗
XMCDLIB/config/config.sh
XMCDLIB/config/common.cfg
XMCDLIB/config/device.cfg
XMCDLIB/config/.tbl/∗
XMCDLIB/config/∗
XMCDLIB/help/∗
BINDIR/xmcd
MANDIR/xmcd.1
/tmp/.cdaudio/∗
RELATED WEB SITES
Xmcd/cda web site: http://www.amb.org/xmcd/
Gracenote web site: http://www.cddb.com/
Xmmix web site: http://www.amb.org/xmmix/
LAME MP3 encoder: http://www.mp3dev.org/
Ogg Vorbis: http://www.xiph.org/ogg/vorbis/
FLAC (Free Lossless Audio CODEC): http://flac.sourceforge.net/
FAAC (AAC/MP4 encoder): http://www.audiocoding.com/
Hydrogen Audio (discussion forums): http://www.hydrogenaudio.org/
Sox audio format conversion utility: http://www.spies.com/Sox/
SEE ALSOcda(1), X(1), xhost(1), xauth(1), Xsecurity(1), xlsfonts(1), lame(1),
faac(1), sox(1)
Xmcd's README, PLATFORM, DRIVES, INSTALL and RELNOTES files
AUTHOR
Ti Kan (xmcd@amb.org)
AMB Laboratories, Sunnyvale, CA, U.S.A.
Xmcd also contains code contributed by several dedicated individuals.
See the ACKS file in the xmcd distribution for information.
Comments, suggestions, and bug reports are always welcome.
v3.3.2 04/04/21 XMCD(1)
