VGCREATE(8)VGCREATE(8)NAMEvgcreate - create a volume group
SYNOPSISvgcreate [--addtag Tag] [--alloc AllocationPolicy] [-A|--autobackup
{y|n}] [-c|--clustered {y|n}] [-d|--debug] [-h|--help] [-l|--maxlogi‐
calvolumes MaxLogicalVolumes] [-M|--metadatatypetype] [-p|--maxphysi‐
calvolumes MaxPhysicalVolumes] [-s|--physicalextentsize PhysicalExtent‐
Size[kKmMgGtT]] [-t|--test] [-v|--verbose] [--version] VolumeGroupName
PhysicalVolumePath [PhysicalVolumePath...]
DESCRIPTIONvgcreate creates a new volume group called VolumeGroupName using the
block special device PhysicalVolumePath previously configured for LVM
with pvcreate(8).
OPTIONS
See lvm for common options.
-c, --clustered {y|n}
If clustered locking is enabled, this defaults to y indicating
that this Volume Group is shared with other nodes in the clus‐
ter.
If the new Volume Group contains only local disks that are not
visible on the other nodes, you must specify --clustered n. If
the cluster infrastructure is unavailable on a particular node
at a particular time, you may still be able to use such Volume
Groups.
-l, --maxlogicalvolumes MaxLogicalVolumes
Sets the maximum number of logical volumes allowed in this vol‐
ume group. The setting can be changed with vgchange. For vol‐
ume groups with metadata in lvm1 format, the limit and default
value is 255. If the metadata uses lvm2 format, the default
value is 0 which removes this restriction: there is then no
limit.
-p, --maxphysicalvolumes MaxPhysicalVolumes
Sets the maximum number of physical volumes that can belong to
this volume group. The setting can be changed with vgchange.
For volume groups with metadata in lvm1 format, the limit and
default value is 255. If the metadata uses lvm2 format, the
default value is 0 which removes this restriction: there is then
no limit. If you have a large number of physical volumes in a
volume group with metadata in lvm2 format, for tool performance
reasons, you should consider some use of --metadatacopies 0 as
described in pvcreate(8).
-s, --physicalextentsize PhysicalExtentSize[kKmMgGtT]
Sets the physical extent size on physical volumes of this volume
group. A size suffix (k for kilobytes up to t for terabytes) is
optional, megabytes is the default if no suffix is present. The
default is 4 MB and it must be at least 1 KB and a power of 2.
Once this value has been set, it is difficult to change it with‐
out recreating the volume group which would involve backing up
and restoring data on any logical volumes. However, if no
extents need moving for the new value to apply, it can be
altered using vgchange -s.
If the volume group metadata uses lvm1 format, extents can vary
in size from 8KB to 16GB and there is a limit of 65534 extents
in each logical volume. The default of 4 MB leads to a maximum
logical volume size of around 256GB.
If the volume group metadata uses lvm2 format those restrictions
do not apply, but having a large number of extents will slow
down the tools but have no impact on I/O performance to the log‐
ical volume. The smallest PE is 1KB.
The 2.4 kernel has a limitation of 2TB per block device.
EXAMPLES
To create a volume group named test_vg using physical volumes
/dev/hdk1, and /dev/hdl1 with default physical extent size of 4MB:
vgcreate test_vg /dev/sdk1 /dev/sdl1
SEE ALSOlvm(8), pvdisplay(8), pvcreate(8), vgdisplay(8), vgextend(8), vgre‐
duce(8), lvcreate(8), lvdisplay(8), lvextend(8), lvreduce(8)Sistina Software UK LVM TOOLS 2.02.44-cvs (02-17-09) VGCREATE(8)
