TRAN_INIT_PKT(9E)TRAN_INIT_PKT(9E)NAME
tran_init_pkt, tran_destroy_pkt - SCSI HBA packet preparation and deal‐
location
SYNOPSIS
#include <sys/scsi/scsi.h>
struct scsi_pkt *prefixtran_init_pkt(struct scsi_address *ap,
struct scsi_pkt *pkt, struct buf *bp, int cmdlen,
int statuslen, int tgtlen, intflags, int (*callback,
caddr_t),caddr_t arg);
void prefixtran_destroy_pkt(struct scsi_address *ap,
struct scsi_pkt *pkt);
INTERFACE LEVEL
Solaris architecture specific (Solaris DDI).
PARAMETERS
ap
Pointer to a scsi_address(9S) structure.
pkt
Pointer to a scsi_pkt(9S) structure allocated in an ear‐
lier call, or NULL.
bp
Pointer to a buf(9S) structure if DMA resources are to be
allocated for the pkt, or NULL.
cmdlen
The required length for the SCSI command descriptor block
(CDB) in bytes.
statuslen
The required length for the SCSI status completion block
(SCB) in bytes.
tgtlen
The length of the packet private area within the scsi_pkt
to be allocated on behalf of the SCSI target driver.
flags
Flags for creating the packet.
callback
Pointer to either NULL_FUNC or SLEEP_FUNC.
arg
Always NULL.
DESCRIPTION
The tran_init_pkt() and tran_destroy_pkt() vectors in the scsi_hba_tran
structure must be initialized during the HBA driver's attach(9E) to
point to HBA entry points to be called when a target driver calls
scsi_init_pkt(9F) and scsi_destroy_pkt(9F).
tran_init_pkt()tran_init_pkt() is the entry point into the HBA which is used to allo‐
cate and initialize a scsi_pkt structure on behalf of a SCSI target
driver. If pkt is NULL, the HBA driver must use scsi_hba_pkt_alloc(9F)
to allocate a new scsi_pkt structure.
If bp is non-NULL, the HBA driver must allocate appropriate DMA
resources for the pkt, for example, throughddi_dma_buf_setup(9F) or
ddi_dma_buf_bind_handle(9F).
If the PKT_CONSISTENT bit is set in flags, the buffer was allocated by
scsi_alloc_consistent_buf(9F). For packets marked with PKT_CONSISTENT,
the HBA driver must synchronize any cached data transfers before call‐
ing the target driver's command completion callback.
If the PKT_DMA_PARTIAL bit is set in flags, the HBA driver should set
up partial data transfers, such as setting the DDI_DMA_PARTIAL bit in
the flags argument if interfaces such as ddi_dma_buf_setup(9F) or
ddi_dma_buf_bind_handle(9F) are used.
If only partial DMA resources are available, tran_init_pkt() must
return in the pkt_resid field of pkt the number of bytes of DMA
resources not allocated.
If both pkt and bp are non-NULL, if the PKT_DMA_PARTIAL bit is set
in flags, and if DMA resources have already been allocated for the
pkt with a previous call to tran_init_pkt() that returned a non-zero
pkt_resid field, this request is to move the DMA resources for the sub‐
sequent piece of the transfer.
The contents of scsi_address(9S) pointed to by ap are copied into the
pkt_address field of the scsi_pkt(9S) by scsi_hba_pkt_alloc(9F).
tgtlen is the length of the packet private area in the scsi_pkt struc‐
ture to be allocated on behalf of the SCSI target driver.
statuslen is the required length for the SCSI status completion block.
If the requested status length is greater than or equal to
sizeof(struct scsi_arq_status) and the auto_rqsense capability has
been set, automatic request sense (ARS) is enabled for this packet. If
the status length is less than sizeof(struct scsi_arq_status), auto‐
matic request sense must be disabled for this pkt.
If the HBA driver is not capable of disabling ARQ on a per-packet basis
and tran_init_pkt() is called with a statuslen that is less than
sizeof(struct scsi_arq_status), the driver's tran_init_pkt routine
should allocate at least sizeof(struct scsi_arq_status). If an ARS is
needed, upon successful ARS done by the HBA driver, the driver must
copy the sense data over and set STAT_ARQ_DONE in pkt_state.
cmdlen is the required length for the SCSI command descriptor block.
Note: tgtlen, statuslen, and cmdlen are used only when the HBA driver
allocates the scsi_pkt(9S), in other words, when pkt is NULL.
callback indicates what the allocator routines should do when resources
are not available:
NULL_FUNC
Do not wait for resources. Return a NULL pointer.
SLEEP_FUNC
Wait indefinitely for resources.
tran_destroy_pkt()tran_destroy_pkt() is the entry point into the HBA that must free all
of the resources that were allocated to the scsi_pkt(9S) structure dur‐
ing tran_init_pkt().
RETURN VALUEStran_init_pkt() must return a pointer to a scsi_pkt(9S) structure on
success, or NULL on failure.
If pkt is NULL on entry, and tran_init_pkt() allocated a packet
throughscsi_hba_pkt_alloc(9F) but was unable to allocate DMA resources,
tran_init_pkt() must free the packet through scsi_hba_pkt_free(9F)
before returning NULL.
SEE ALSOattach(9E), tran_setup_pkt(9E), tran_sync_pkt(9E), biodone(9F), bioer‐
ror(9F), ddi_dma_buf_bind_handle(9F), ddi_dma_buf_setup(9F),
kmem_cache_create(9F), scsi_alloc_consistent_buf(9F),
scsi_destroy_pkt(9F), scsi_hba_attach(9F), scsi_hba_pkt_alloc(9F),
scsi_hba_pkt_free(9F), scsi_init_pkt(9F), buf(9S), scsi_address(9S),
scsi_hba_tran(9S), scsi_pkt(9S)
Writing Device Drivers
NOTES
If a DMA allocation request fails with DDI_DMA_NOMAPPING, indicate the
error by calling bioerror(9F) with bp and an error code of EFAULT.
If a DMA allocation request fails with DDI_DMA_TOOBIG, indicate the
error by calling bioerror(9F) with bp and an error code of EINVAL.
For increased performance, an HBA driver may want to provide a cache
for scsi_pkt(9S) allocation. This cache should be implemented by the
HBA driver providing a tran_setup_pkt(9E) implementation. Implementing
this cache by direct use of kmem_cache_create(9F) adds a compile-time
dependency on scsi_pkt() size, which is illegal.
Jan 11, 2009 TRAN_INIT_PKT(9E)
