STONITH(8) System administration utilitie STONITH(8)NAMEstonith - extensible interface for remotely powering down a node in the
cluster
SYNOPSISstonith-h
stonith [-s] [-h] -L
stonith [-s] [-h] -t stonith-device-type -n
stonith [-s] [-h] -t stonith-device-type {name=value... |
-p stonith-device-parameters |
-F stonith-device-parameters-file} [-c count] [-l] [-S]
stonith [-s] [-h] -t stonith-device-type {name=value... |
-p stonith-device-parameters |
-F stonith-device-parameters-file} [-c count]
[-T {reset | on | off}] [nodename]
DESCRIPTION
The STONITH module provides an extensible interface for remotely
powering down a node in the cluster (STONITH = Shoot The Other Node In
The Head). The idea is quite simple: when the software running on one
machine wants to make sure another machine in the cluster is not using
a resource, pull the plug on the other machine. It's simple and
reliable, albeit admittedly brutal.
OPTIONS
The following options are supported:
-c count
Perform any actions identified by the -l, -S and -T options count
times.
-F stonith-device-parameters-file
Path of file specifying parameters for a stonith device. To
determine the syntax of the parameters file for a given device type
run:
# stonith-t stonith-device-type -n
All of the listed parameters need to appear in order on a single
line in the parameters file and be delimited by whitespace.
-h
Display detailed information about a stonith device including
description, configuration information, parameters and any other
related information. When specified without a stonith-device-type,
detailed information on all stonith devices is displayed.
If you don't yet own a stonith device and want to know more about
the ones we support, this information is likely to be helpful.
-L
List the valid stonith device types, suitable for passing as an
argument to the -t option.
-l
List the hosts controlled by the stonith device.
-n
Output the parameter names of the stonith device.
name=value
Parameter, in the form of a name/value pair, to pass directly to
the stonith device. To determine the syntax of the parameters for a
given device type run:
# stonith-t stonith-device-type -n
All of the listed parameter names need to be passed with their
corresponding values.
-p stonith-device-parameters
Parameters to pass directly to the stonith device. To determine the
syntax of the parameters for a given device type run:
# stonith-t stonith-device-type -n
All of the listed parameter names need to appear in order and be
delimited by whitespace.
-S
Show the status of the stonith device.
-s
Silent operation. Suppress logging of error messages to standard
error.
-T action
The stonith action to perform on the node identified by nodename.
Chosen from reset, on, and off.
Note
If a nodename is specified without the -T option, the stonith
action defaults to reset.
-t stonith-device-type
The type of the stonith device to be used to effect stonith. A list
of supported devices for an installation may be obtained using the
-L option.
-v
Ignored.
EXAMPLES
To determine which stonith devices are available on your installation,
use the -L option:
# stonith-L
All of the supported devices will be displayed one per line. Choose one
from this list that is best for your environment - let's use wti_nps
for the rest of this example. To get detailed information about this
device, use the -h option:
# stonith-t wti_nps -h
Included in the output is the list of valid parameter names for
wti_nps. To get just the list of valid parameter names, use the -n
option instead:
# stonith-t wti_nps -n
All of the required parameter names will be displayed one per line. For
wti_nps the output is:
ipaddr
password
There are three ways to pass these parameters to the device. The first
(and preferred) way is by passing name/value pairs on the stonith
command line:
# stonith-t wti_nps ipaddr=my-dev-ip password=my-dev-pw ...
The second way, which is maintained only for backward compatibility
with legacy clusters, is passing the values in order on the stonith
command line with the -p option:
# stonith-t wti_nps -p "my-dev-ip my-dev-pw" ...
The third way, which is also maintained only for backward compatibility
with legacy clusters, is placing the values in order on a single line
in a config file:
my-dev-ip my-dev-pw
... and passing the name of the file on the stonith command line with
the -F option:
# stonith-t wti_nps -F ~/my-wtinps-config ...
To make sure you have the configuration set up correctly and that the
device is available for stonith operations, use the -S option:
# stonith-t wti_nps ipaddr=my-dev-ip password=my-dev-pw -S
If all is well at this point, you should see something similar to:
stonith: wti_nps device OK.
If you don't, some debugging may be necessary to determine if the
config info is correct, the device is powered on, etc. The -d option
can come in handy here - you can add it to any stonith command to cause
it to generate debug output.
To get the list of hosts controlled by the device, use the -l option:
# stonith-t wti_nps ipaddr=my-dev-ip password=my-dev-pw -l
All of the hosts controlled by the device will be displayed one per
line. For wti_nps the output could be:
node1
node2
node3
To power off one of these hosts, use the -T option:
# stonith-t wti_nps ipaddr=my-dev-ip password=my-dev-pw -T off node
SEE ALSOheartbeat(8), meatclient(8)AUTHORS
Alan Robertson <alanr@unix.sh>
stonith
Simon Horman <horms@vergenet.net>
man page
Florian Haas <florian.haas@linbit.com>
man page
cluster-glue 1.0.11 December 7, 2009 STONITH(8)
