SECTOK(1)		     BSD Reference Manual		     SECTOK(1)

NAME
     sectok - communicate with smartcards using iso7816

SYNOPSIS
     sectok [-0123] [-f scriptfile] [-s sleeptime]

DESCRIPTION
     sectok is a command-line-like interface for communicating with
     smartcards. APDUs can be sent to the card, and results are displayed.
     Some commands are card-specific, and focus on the Schlumberger Cyberflex
     Access Javacards.

     The options are as follows:

     -0123   Select port.

     -f scriptfile
	     Run commands from scriptfile.

     -s sleeptime
	     Set sleep (in milliseconds) between commands in the script.

COMMANDS
  Non-card commands

     help    List all commands.

     help [command]
	     Show help for command.

     ? [command]
	     Show help for command.

     reset [-0123ivf]
	     Reset smartcard.

	     -0123   select port

	     -i	     don't wait for card insertion

	     -v	     verbose

	     -f	     open connection even if atr is bad

     open [-0123ivf]
	     Synonym for reset.

     close   Close smartcard connection.

     quit    Quit sectok.

  ISO 7816-4 commands

     apdu [-c class] ins p1 p2 p3 data ...
	     Send APDU to smartcard.

     fid [-v] fid/aid
	     Select file or aid identified by fid/aid. fid/aid can be a numer-
	     ic fid such as 3f00, a two character name, or an aid in hex or
	     ASCII.

     isearch
	     Try all 256 possible instructions and print results.

     class [class]
	     Inquire or set default application class.

     read [-x] filesize
	     Read selected fid and write to stdout.

     write input-filename
	     Read from input-filename and write to selected fid.

     challenge [length]
	     Get a random challenge from the card.

     pin [-k keyno] [PIN]
	     Verify CHV (PIN).

     chpin [-k keyno]
	     Change CHV (PIN).

  Cyberflex commands

     ls [-l]
	     List all files in current DF.

     acl fid [principal: r1 r2 ...]

	     principals
		     world, CHV1, CHV2, AUT0, AUT1, AUT2, AUT3, AUT4

	     f_rights
		     r, w, x/a, inval, rehab, dec, inc

	     d_rights
		     l, d, a, i, manage

     create fid size

     delete fid

     jdefault [-d]
	     Set default applet.

	     -d	     set default applet to default loader

     jatr    Set java atr.

     jdata   Print useful info about the card

     login [-d] [-k keyno] [-v] [-x hex-aut0]
	     "login" (verify AUT0 key)

	     -d	     use manufacturer's default AUT0 key

     jload [-p progID] [-c contID] [-s cont_size] [-i inst_size] [-v] [-a aid]
	     filename
	     Load an applet to the card. If the first byte of the aid is '#'
	     it will be converted to 0xfc.

     junload [-p progID] [-c contID]

     jselect [-a aid] [-d]
	     Select applet.

	     -d	     select default loader

     setpass [-d] [-x hex-aut0]

	     -d	     use manufacturer's default AUT0 key

HISTORY
     sectok first appeared in OpenBSD 3.0.

AUTHORS
     sectok was written by Jim Rees and others at University of Michigan
     Center for Information Technology Integration (CITI).

MirOS BSD #10-current		July 17, 2001				     2

Vote for polarhome