SCSI_SETUP_CDB(9F)SCSI_SETUP_CDB(9F)NAMEscsi_setup_cdb - setup SCSI command descriptor block (CDB)
SYNOPSIS
int scsi_setup_cdb(union scsi_cdb *cdbp, uchar_t cmd, uint_t addr,
uint_t cnt, uint_t othr_cdb_data);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI).
PARAMETERS
cdbp
Pointer to command descriptor block.
cmd
The first byte of the SCSI group 0, 1, 2, 4, or 5 CDB.
addr
Pointer to the location of the data.
cnt
Data transfer length in units defined by the SCSI
device type. For sequential devices cnt is the number
of bytes. For block devices, cnt is the number of
blocks.
othr_cdb_data
Additional CDB data.
DESCRIPTION
The scsi_setup_cdb() function initializes a group 0, 1, 2, 4, or 5 type
of command descriptor block pointed to by cdbp using cmd, addr, cnt,
othr_cdb_data.
addr should be set to 0 for commands having no addressing information
(for example, group 0 READ command for sequential access devices).
othr_cdb_data should be additional CDB data for Group 4 commands; oth‐
erwise, it should be set to 0.
The scsi_setup_cdb() function does not set the LUN bits in CDB[1] as
the makecom(9F) functions do. Also, the fixed bit for sequential
access device commands is not set.
RETURN VALUES
The scsi_setup_cdb() function returns:
1
Upon success.
0
Upon failure.
CONTEXT
These functions can be called from a user, interrupt, or kernel con‐
text.
SEE ALSOmakecom(9F), scsi_pkt(9S)
Writing Device Drivers
American National Standard Small Computer System Interface-2 (SCSI-2)
American National Standard SCSI-3 Primary Commands (SPC)
Jan 16, 2006 SCSI_SETUP_CDB(9F)