pulse-cli-syntax man page on OpenMandriva

Printed from http://www.polarhome.com/service/man/?qf=pulse-cli-syntax&af=0&tf=2&of=OpenMandriva

pulse-cli-syntax(5)					   pulse-cli-syntax(5)

NAME
       pulse-cli-syntax - PulseAudio Command Line Interface Syntax

SYNOPSIS
       ~/.config/pulse/default.pa

       /etc/pulse/default.pa

       /etc/pulse/system.pa

DESCRIPTION
       PulseAudio  provides  a simple command line language used by configura‐
       tion scripts, the pacmd interactive shell, and the  modules  module-cli
       and  module-cli-protocol-{unix,tcp}.  Empty  lines  and lines beginning
       with a hashmark (#) are silently ignored.  Several  commands  are  sup‐
       ported.

       Note  that  any	boolean arguments can be given positively as '1', 't',
       'y', 'true', 'yes' or 'on'. Likewise, negative values can be  given  as
       '0', 'f', 'n', 'false', 'no' or 'off'. Case is ignored.

GENERAL COMMANDS
       help   Show a quick help on the commands available.

STATUS_COMMANDS
       list-modules
	      Show all currently loaded modules with their arguments.

       list-cards
	      Show all currently registered cards

       list-sinks or list-sources
	      Show all currently registered sinks (resp. sources).

       list-clients
	      Show all currently active clients.

       list-sink-inputs or list-source-outputs
	      Show  all	 currently  active  inputs  to	sinks  a.k.a. playback
	      streams (resp. outputs of sources a.k.a. recording streams).

       stat   Show some simple statistics about the  allocated	memory	blocks
	      and the space used by them.

       info or ls or list
	      A	 combination of all status commands described above (all three
	      commands are synonyms).

MODULE MANAGEMENT
       load-module name [arguments...]
	      Load a module specified by its name and arguments. For most mod‐
	      ules it is OK to be loaded more than once.

       unload-module index|name
	      Unload  a	 module,  specified  either by its index in the module
	      list or its name.

       describe-module name
	      Give information about a module specified by its name.

VOLUME COMMANDS
       set-sink-volume|set-source-volume index|name volume
	      Set the volume of the specified sink  (resp.  source).  You  may
	      specify  the  sink  (resp.  source)  either  by its index in the
	      sink/source list or by its name. The volume should be an integer
	      value greater or equal than 0 (muted). Volume 65536 (0x10000) is
	      'normal' volume a.k.a. 100%. Values greater  than	 this  amplify
	      the audio signal (with clipping).

       set-sink-mute|set-source-mute index|name boolean
	      Mute  or unmute the specified sink (resp. source). You may spec‐
	      ify the sink (resp. source) either by its index or by its	 name.
	      The mute value is either 0 (not muted) or 1 (muted).

       set-sink-input-volume|set-source-output-volume index volume
	      Set  the	volume of a sink input (resp. source output) specified
	      by its index. The same volume rules apply as with	 set-sink-vol‐
	      ume.

       set-sink-input-mute|set-source-output-mute index boolean
	      Mute  or	unmute a sink input (resp. source output) specified by
	      its index. The same mute rules apply as with set-sink-mute.

CONFIGURATION COMMANDS
       set-default-sink|set-default-source index|name
	      Make a sink (resp. source) the default. You may specify the sink
	      (resp.  source)  by its index in the sink (resp. source) list or
	      by its name.

	      Note that defaults may be overridden by various  policy  modules
	      or by specific stream configurations.

       set-card-profile index|name profile-name
	      Change the profile of a card.

       set-sink-port|set-source-port index|name port-name
	      Change the profile of a sink (resp. source).

       set-port-latency-offset card-index|card-name port-name offset
	      Change  the  latency offset of a port belonging to the specified
	      card

       suspend-sink|suspend-source index|name boolean
	      Suspend (i.e. disconnect from the underlying  hardware)  a  sink
	      (resp. source).

       suspend boolean
	      Suspend all sinks and sources.

MOVING STREAMS
       move-sink-input|move-source-output index sink-index|sink-name
	      Move  sink  input	 (resp.	 source output) to another sink (resp.
	      source).

PROPERTY LISTS
       update-sink-proplist|update-source-proplist index|name properties
	      Update the properties of a sink (resp. source) specified by name
	      or  index.  The  property	 is  specified as e.g. device.descrip‐
	      tion="My Preferred Name"

       update-sink-input-proplist|update-source-output-proplist index  proper‐
       ties
	      Update  the  properties  of  a  sink input (resp. source output)
	      specified by index. The properties are specified as above.

SAMPLE CACHE
       list-samples
	      Lists the contents of the sample cache.

       play-sample name sink-index|sink-name
	      Play a sample cache entry to a sink.

       remove-sample name
	      Remove an entry from the sample cache.

       load-sample name filename
	      Load an audio file to the sample cache.

       load-sample-lazy name filename
	      Create a new entry in the sample cache, but don't load the  sam‐
	      ple  immediately.	 The  sample  is  loaded only when it is first
	      used. After a certain idle time it is freed again.

       load-sample-dir-lazy path
	      Load all entries in the  specified  directory  into  the	sample
	      cache  as lazy entries. A shell globbing expression (e.g. *.wav)
	      may be appended to the path of the directory to add.

KILLING CLIENTS/STREAMS
       kill-client index
	      Remove a client forcibly from the server. There is no protection
	      against the client reconnecting immediately.

       kill-sink-input|kill-source-output index
	      Remove  a	 sink  input  (resp.  source output) forcibly from the
	      server. This will not remove the	owning	client	or  any	 other
	      streams opened by the same client from the server.

LOG COMMANDS
       set-log-level numeric-level
	      Change the log level.

       set-log-meta boolean
	      Show source code location in log messages.

       set-log-target target
	      Change  the  log	target	(null,	auto, journal, syslog, stderr,
	      file:PATH, newfile:PATH).

       set-log-time boolean
	      Show timestamps in log messages.

       set-log-backtrace num-frames
	      Show backtrace in log messages.

MISCELLANEOUS COMMANDS
       play-file filename sink-index|sink-name
	      Play an audio file to a sink.

       dump   Dump the daemon's current configuration in CLI commands.

       dump-volumes
	      Debug: Shows the current state of all volumes.

       shared Debug: Show shared properties.

       exit   Terminate the daemon. If you want to terminate a CLI  connection
	      ("log out") you might want to use ctrl+d

META COMMANDS
       In addition to the commands described above there are a few meta direc‐
       tives supported by the command line interpreter.

       .include filename|folder
	      Executes the commands from the specified script file or  in  all
	      of the *.pa file within the folder.

       .fail and .nofail
	      Enable (resp. disable) that following failing commands will can‐
	      cel the execution of the current script file. This is a  ignored
	      when used on the interactive command line.

AUTHORS
       The   PulseAudio	  Developers   <pulseaudio-discuss  (at)  lists	 (dot)
       freedesktop (dot) org>; PulseAudio is  available	 from  http://pulseau‐
       dio.org/

SEE ALSO
       default.pa(5), pacmd(1), pulseaudio(1)

Manuals				     User		   pulse-cli-syntax(5)
[top]

List of man pages available for OpenMandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net