OCF_HEARTBEAT_ISCSIT(7) OCF resource agents OCF_HEARTBEAT_ISCSIT(7)NAMEocf_heartbeat_iSCSITarget - iSCSI target export agent
SYNOPSIS
iSCSITarget [start | stop | status | monitor | meta-data |
validate-all]
DESCRIPTION
Manages iSCSI targets. An iSCSI target is a collection of SCSI Logical
Units (LUs) exported via a daemon that speaks the iSCSI protocol.
SUPPORTED PARAMETERS
implementation
The iSCSI target daemon implementation. Must be one of "iet",
"tgt", or "lio". If unspecified, an implementation is selected
based on the availability of management utilities, with "iet" being
tried first, then "tgt", then "lio".
(optional, string, no default)
iqn
The target iSCSI Qualified Name (IQN). Should follow the
conventional "iqn.yyyy-mm.<reversed domain name>[:identifier]"
syntax.
(unique, required, string, no default)
tid
The iSCSI target ID. Required for tgt.
(unique, optional, integer, no default)
portals
iSCSI network portal addresses. Not supported by all
implementations. If unset, the default is to create one portal that
listens on .
(optional, string, default "0.0.0.0:3260")
allowed_initiators
Allowed initiators. A space-separated list of initiators allowed to
connect to this target. Initiators may be listed in any syntax the
target implementation allows. If this parameter is empty or not
set, access to this target will be allowed from any initiator.
(optional, string, no default)
incoming_username
A username used for incoming initiator authentication. If
unspecified, allowed initiators will be able to log in without
authentication. This is a unique parameter, as it not allowed to
re-use a single username across multiple target instances.
(unique, optional, string, no default)
incoming_password
A password used for incoming initiator authentication.
(optional, string, no default)
additional_parameters
Additional target parameters. A space-separated list of
"name=value" pairs which will be passed through to the iSCSI
daemon's management interface. The supported parameters are
implementation dependent. Neither the name nor the value may
contain whitespace.
(optional, string, no default)
SUPPORTED ACTIONS
This resource agent supports the following actions (operations):
start
Starts the resource. Suggested minimum timeout: 10.
stop
Stops the resource. Suggested minimum timeout: 10.
status
Performs a status check. Suggested minimum timeout: 10. Suggested
interval: 10.
monitor
Performs a detailed status check. Suggested minimum timeout: 10.
Suggested interval: 10.
meta-data
Retrieves resource agent metadata (internal use only). Suggested
minimum timeout: 5.
validate-all
Performs a validation of the resource configuration. Suggested
minimum timeout: 10.
EXAMPLE
The following is an example configuration for a iSCSITarget resource
using the crm(8) shell:
primitive p_iSCSITarget ocf:heartbeat:iSCSITarget \
params \
iqn=string \
op monitor timeout="10" interval="10" depth="0"
SEE ALSO
http://www.linux-ha.org/wiki/iSCSITarget_(resource_agent)AUTHOR
Linux-HA contributors (see the resource agent source for information
about individual authors)
resource-agents UNKNOWN 03/24/2013 OCF_HEARTBEAT_ISCSIT(7)
