ocf_heartbeat_ethmonitor man page on Mageia

Man page or keyword search:  
man Server   17783 pages
apropos Keyword Search (all sections)
Output format
Mageia logo
[printable version]

OCF_HEARTBEAT_ETHMON(7)	      OCF resource agents      OCF_HEARTBEAT_ETHMON(7)

NAME
       ocf_heartbeat_ethmonitor - Monitors network interfaces

SYNOPSIS
       ethmonitor [start | stop | status | monitor | meta-data | validate-all]

DESCRIPTION
       Monitor the vitality of a local network interface.

       You may setup this RA as a clone resource to monitor the network
       interfaces on different nodes, with the same interface name. This is
       not related to the IP adress or the network on which a interface is
       configured. You may use this RA to move resources away from a node,
       which has a faulty interface or prevent moving resources to such a
       node. This gives you independend control of the resources, without
       involving cluster intercommunication. But it requires your nodes to
       have more than one network interface.

       The resource configuration requires a monitor operation, because the
       monitor does the main part of the work. In addition to the resource
       configuration, you need to configure some location contraints, based on
       a CIB attribute value. The name of the attribute value is configured in
       the 'name' option of this RA.

       Example constraint configuration: location loc_connected_node
       my_resource_grp rule ="rule_loc_connected_node" -INF: ethmonitor eq 0

       The ethmonitor works in 3 different modes to test the interface
       vitality. 1. call ip to see if the link status is up (if link is down
       -> error) 2. call ip an watch the RX counter (if packages come around
       in a certain time -> success) 3. call arping to check wether any of the
       IPs found in the lokal ARP cache answers an ARP REQUEST (one answer ->
       success) 4. return error

SUPPORTED PARAMETERS
       interface
	   The name of the network interface which should be monitored (e.g.
	   eth0).

	   (unique, required, string, no default)

       name
	   The name of the CIB attribute to set. This is the name to be used
	   in the constraints. Defaults to "ethmonitor-'interface_name'".

	   (unique, optional, string, no default)

       multiplier
	   Multiplier for the value of the CIB attriobute specified in
	   parameter name.

	   (optional, integer, default 1)

       repeat_count
	   Specify how often the interface will be monitored, before the
	   status is set to failed. You need to set the timeout of the
	   monitoring operation to at least repeat_count * repeat_interval

	   (optional, integer, default 5)

       repeat_interval
	   Specify how long to wait in seconds between the repeat_counts.

	   (optional, integer, default 10)

       pktcnt_timeout
	   Timeout for the RX packet counter. Stop listening for packet
	   counter changes after the given number of seconds.

	   (optional, integer, default 5)

       arping_count
	   Number of ARP REQUEST packets to send for every IP. Usually one ARP
	   REQUEST (arping) is send

	   (optional, integer, default 1)

       arping_timeout
	   Time in seconds to wait for ARP REQUESTs (all packets of
	   arping_count). This is to limit the time for arp requests, to be
	   able to send requests to more than one node, without running in the
	   monitor operation timeout.

	   (optional, integer, default 1)

       arping_cache_entries
	   Maximum number of IPs from ARP cache list to check for ARP REQUEST
	   (arping) answers. Newest entries are tried first.

	   (optional, integer, default 5)

SUPPORTED ACTIONS
       This resource agent supports the following actions (operations):

       start
	   Starts the resource. Suggested minimum timeout: 20s.

       stop
	   Stops the resource. Suggested minimum timeout: 20s.

       status
	   Performs a status check. Suggested minimum timeout: 20s. Suggested
	   interval: 10s.

       monitor
	   Performs a detailed status check. Suggested minimum timeout: 20s.
	   Suggested interval: 10s.

       meta-data
	   Retrieves resource agent metadata (internal use only). Suggested
	   minimum timeout: 5s.

       validate-all
	   Performs a validation of the resource configuration. Suggested
	   minimum timeout: 20s.

EXAMPLE
       The following is an example configuration for a ethmonitor resource
       using the crm(8) shell:

	   primitive p_ethmonitor ocf:heartbeat:ethmonitor \
	     params \
	       interface=string \
	     op monitor depth="0" timeout="20s" interval="10s"

SEE ALSO
       http://www.linux-ha.org/wiki/ethmonitor_(resource_agent)

AUTHOR
       Linux-HA contributors (see the resource agent source for information
       about individual authors)

resource-agents UNKNOWN		  03/24/2013	       OCF_HEARTBEAT_ETHMON(7)
[top]

List of man pages available for Mageia

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net