NUT-RECORDER(8) NUT Manual NUT-RECORDER(8)NAMEnut-recorder - utility to record device status and values changes
SYNOPSISnut-recorder device-name [output-file] [interval]
DESCRIPTIONnut-recorder is an utility to record device running sequence (Ie power
failures or any other change) through a NUT data server, and dump it in
a .seq format.
The .seq file can then be used by the dummy-ups(8) driver to replay the
sequence.
OPTIONS
device-name
Record the changes of that device. The format for this option is
devname[@hostname[:port]]. The default hostname is "localhost".
output-file
Optional. Data will be saved to this file. The default is
dummy-device.seq.
interval
Optional. The status of the device will be checked every interval.
The default is 5 seconds.
EXAMPLES
To record data from ups1@host1 every 10 seconds:
$ nut-recorder ups1@host1' ups1-output.seq 10
. . .
battery.charge: 100.0
battery.voltage: 13.9
battery.voltage.nominal: 13.6
ups.status: OL
. . .
battery.charge: 90.0
ups.status: OB
. . .
You can then define a dummy device in ups.conf(5):
[ups-test]
driver = dummy-ups
port = ups1-output.seq
AUTHOR
Arnaud Quette
SEE ALSOdummy-ups(8)INTERNET RESOURCES
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 08/07/2012 NUT-RECORDER(8)