drd-mount man page on HP-UX

Man page or keyword search:  
man Server   10987 pages
apropos Keyword Search (all sections)
Output format
HP-UX logo
[printable version]

drd-mount(1M)							 drd-mount(1M)

NAME
       drd mount   - mount the inactive system image.

SYNOPSIS
       option_file]

DESCRIPTION
       The command mounts all the file systems in the inactive system image.

       The DRD commands manage two system images:

       The  image consists of the LVM volume group or VxVM disk group that was
       booted when the most recent command was run, and resides on the	physi‐
       cal disk that contains that group.

       The  image consists of the LVM volume group or VxVM disk group that was
       created by the command, and resides on the target disk of the command.

       Since the system may have been booted from the  clone  between  running
       and either or may be active (booted) when the command is run.

       The  root  file system of the inactive system image is mounted as where
       is as described above. All other file systems  are  mounted  under  the
       root file system.

   Options
       recognizes the following options:

	      Displays the usage message.

	      Sets preview mode.

	      Decreases	 the verbosity level by one each time it is specified.
	      For example,
		     will reduce the verbosity from the default value of 4  to
		     2.	  If  both  and	 are included on the command line, the
		     effective verbosity is 2. The minimum verbosity level  is
		     0.	 (See also the option).

	      Increases	 the verbosity level by one each time it is specified.
	      For example,
		     will increase the effective verbosity  from  the  default
		     value  of 4 to 5. If both and are included on the command
		     line, the effective verbosity is 3. The maximum verbosity
		     level is 5.  (See also the option).

	      Displays the list of possible
		     (extended) options.

	      Sets  the	 extended  option  to a value. See Extended -x Options
	      definitions below.

	      Gets the extended options from a file.

   Extended -x Options
       recognizes the following (extended) options:

       Usage: Basic
	      This is the path to the log file for this	 command.   Each  time
	      DRD  is  run,  this file will grow larger.  This can be changed,
	      for example, to a month-specific location for easier  archiving,
	      off-host backup, and rotation.

       Usage: Basic
	      Specifies	 the  level  of message verbosity in the log file (See
	      also -x verbosity).  Legal values are:

	      Only ERROR messages and the startingending BANNER messages.

	      Adds WARNING messages.

	      Adds NOTE messages.

	      Adds INFO messages (informational messages preceded by  the  '*'
	      character).

	      Adds verbose INFO messages.

	      Adds very-verbose INFO messages.

       Usage: Basic
	      If  true,	 run this command in preview mode only (i.e., complete
	      the analysis phase and exit; no changes are committed to	disk).
	      Setting this option to true has the same effect as specifying -p
	      on the command line.

       Usage: Basic
	      Specifies the level of stderr verboseness:

	      Only ERROR messages and the startingending BANNER messages.

	      Adds WARNING messages.

	      Adds NOTE messages.

	      Adds INFO messages (informational messages preceded by  the  '*'
	      character).

	      Adds verbose INFO messages.

	      Adds very-verbose INFO messages.

		     Note:   The  '-v' option is equivalent to increasing ver‐
		     bosity by 1 (e.g., from 3 to 4) and the  '-q'  option  is
		     equivalent	 to  decreasing	 verbosity by 1.  The '-v' and
		     '-q' options can be used more than once.

   Return Values
       returns the following values:

	      Success.
	      Error.
	      Warning.

   Examples
       To mount the inactive system image:

       If the system image mounted was created by the most recent command, the
       root file system will be mounted at /var/opt/drd/mnts/sysimage_001.

       If  the	system	image was booted when the most recent command was run,
       the root file system will be mounted at /var/opt/drd/mnts/sysimage_000.

       To display all extended options:

AUTHOR
       was developed by Hewlett-Packard Development Company, L.P.

FILES
       Log file.
       Mount point for the root file system of an inactive system  image  cre‐
       ated by a command.
       Mount  point  for the root file system of an inactive system image that
       was the booted system when was run.

SEE ALSO
       drd(1M),	 drd-activate(1M),  drd-clone(1M),  drd-deactivate(1M),	  drd-
       rehost(1M),  drd-runcmd(1M),  drd-status(1M), drd-umount(1M), drd-unre‐
       host(1M)

       Dynamic	  Root	  Disk	  Administrator's    Guide,    available    at
       http:docs/hp.comenDRD.

								 drd-mount(1M)
[top]

List of man pages available for HP-UX

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net