dprofpp man page on OpenBSD

Man page or keyword search:  
man Server   11362 pages
apropos Keyword Search (all sections)
Output format
OpenBSD logo
[printable version]

DPROFPP(1)	       Perl Programmers Reference Guide		    DPROFPP(1)

NAME
       dprofpp - display perl profile data

SYNOPSIS
       dprofpp [-a|-z|-l|-v|-U] [-d] [-s|-r|-u] [-q] [-F] [-I|-E] [-O cnt]
       [-A] [-R] [-S] [-g subroutine] [-G <regexp> [-P]] [-f <regexp>]
       [profile]

       dprofpp -T [-F] [-g subroutine] [profile]

       dprofpp -t [-F] [-g subroutine] [profile]

       dprofpp -G <regexp> [-P] [profile]

       dprofpp -p script [-Q] [other opts]

       dprofpp -V [profile]

DESCRIPTION
       The dprofpp command interprets profile data produced by a profiler,
       such as the Devel::DProf profiler.  Dprofpp will read the file tmon.out
       and display the 15 subroutines which are using the most time.  By
       default the times for each subroutine are given exclusive of the times
       of their child subroutines.

       To profile a Perl script run the perl interpreter with the -d switch.
       So to profile script test.pl with Devel::DProf use the following:

	       $ perl5 -d:DProf test.pl

       Then run dprofpp to analyze the profile.	 The output of dprofpp depends
       on the flags to the program and the version of Perl you're using.

	       $ dprofpp -u
	       Total Elapsed Time =    1.67 Seconds
			User Time =    0.61 Seconds
	       Exclusive Times
	       %Time Seconds	 #Calls sec/call Name
		52.4   0.320	      2	  0.1600 main::foo
		45.9   0.280	    200	  0.0014 main::bar
		0.00   0.000	      1	  0.0000 DynaLoader::import
		0.00   0.000	      1	  0.0000 main::baz

       The dprofpp tool can also run the profiler before analyzing the profile
       data.  The above two commands can be executed with one dprofpp command.

	       $ dprofpp -u -p test.pl

       Consult "PROFILE FORMAT" in Devel::DProf for a description of the raw
       profile.

OUTPUT
       Columns are:

       %Time
	   Percentage of time spent in this routine.

       #Calls
	   Number of calls to this routine.

       sec/call
	   Average number of seconds per call to this routine.

       Name
	   Name of routine.

       CumulS
	   Time (in seconds) spent in this routine and routines called from
	   it.

       ExclSec
	   Time (in seconds) spent in this routine (not including those called
	   from it).

       Csec/c
	   Average time (in seconds) spent in each call of this routine
	   (including those called from it).

OPTIONS
       -a   Sort alphabetically by subroutine names.

       -d   Reverse whatever sort is used

       -A   Count timing for autoloaded subroutine as timing for *::AUTOLOAD.
	    Otherwise the time to autoload it is counted as time of the
	    subroutine itself (there is no way to separate autoload time from
	    run time).

	    This is going to be irrelevant with newer Perls.  They will inform
	    "Devel::DProf" when the "AUTOLOAD" switches to actual subroutine,
	    so a separate statistics for "AUTOLOAD" will be collected no
	    matter whether this option is set.

       -R   Count anonymous subroutines defined in the same package
	    separately.

       -E   (default)  Display all subroutine times exclusive of child
	    subroutine times.

       -F   Force the generation of fake exit timestamps if dprofpp reports
	    that the profile is garbled.  This is only useful if dprofpp
	    determines that the profile is garbled due to missing exit
	    timestamps.	 You're on your own if you do this.  Consult the BUGS
	    section.

       -I   Display all subroutine times inclusive of child subroutine times.

       -l   Sort by number of calls to the subroutines.	 This may help
	    identify candidates for inlining.

       -O cnt
	    Show only cnt subroutines.	The default is 15.

       -p script
	    Tells dprofpp that it should profile the given script and then
	    interpret its profile data.	 See -Q.

       -Q   Used with -p to tell dprofpp to quit after profiling the script,
	    without interpreting the data.

       -q   Do not display column headers.

       -r   Display elapsed real times rather than user+system times.

       -s   Display system times rather than user+system times.

       -T   Display subroutine call tree to stdout.  Subroutine statistics are
	    not displayed.

       -t   Display subroutine call tree to stdout.  Subroutine statistics are
	    not displayed.  When a function is called multiple consecutive
	    times at the same calling level then it is displayed once with a
	    repeat count.

       -S   Display merged subroutine call tree to stdout.  Statistics are
	    displayed for each branch of the tree.

	    When a function is called multiple (not necessarily consecutive)
	    times in the same branch then all these calls go into one branch
	    of the next level.	A repeat count is output together with
	    combined inclusive, exclusive and kids time.

	    Branches are sorted with regard to inclusive time.

       -U   Do not sort.  Display in the order found in the raw profile.

       -u   Display user times rather than user+system times.

       -V   Print dprofpp's version number and exit.  If a raw profile is
	    found then its XS_VERSION variable will be displayed, too.

       -v   Sort by average time spent in subroutines during each call.	 This
	    may help identify candidates for inlining.

       -z   (default) Sort by amount of user+system time used.	The first few
	    lines should show you which subroutines are using the most time.

       -g "subroutine"
	    Ignore subroutines except "subroutine" and whatever is called from
	    it.

       -G <regexp>
	    Aggregate "Group" all calls matching the pattern together.	For
	    example this can be used to group all calls of a set of packages

	      -G "(package1::)|(package2::)|(package3::)"

	    or to group subroutines by name:

	      -G "getNum"

       -P   Used with -G to aggregate "Pull" together all calls that did not
	    match -G.

       -f <regexp>
	    Filter all calls matching the pattern.

       -h   Display brief help and exit.

       -H   Display long help and exit.

ENVIRONMENT
       The environment variable DPROFPP_OPTS can be set to a string containing
       options for dprofpp.  You might use this if you prefer -I over -E or if
       you want -F on all the time.

       This was added fairly lazily, so there are some undesirable side
       effects.	 Options on the commandline should override options in
       DPROFPP_OPTS--but don't count on that in this version.

BUGS
       Applications which call _exit() or exec() from within a subroutine will
       leave an incomplete profile.  See the -F option.

       Any bugs in Devel::DProf, or any profiler generating the profile data,
       could be visible here.  See "BUGS" in Devel::DProf.

       Mail bug reports and feature requests to the perl5-porters mailing list
       at <perl5-porters@perl.org>.  Bug reports should include the output of
       the -V option.

FILES
	       dprofpp	       - profile processor
	       tmon.out	       - raw profile

SEE ALSO
       perl, Devel::DProf, times(2)

perl v5.12.2							 March 1, 2011
[top]

List of man pages available for OpenBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net