cupsd.conf man page on OpenMandriva

Printed from http://www.polarhome.com/service/man/?qf=cupsd.conf&af=0&tf=2&of=OpenMandriva

cupsd.conf(5)			  Apple Inc.			 cupsd.conf(5)

NAME
       cupsd.conf - server configuration file for cups

DESCRIPTION
       The  cupsd.conf	file  configures  the CUPS scheduler, cupsd(8).	 It is
       normally located in the /etc/cups directory. Note: File, directory, and
       user configuration directives that used to be allowed in the cupsd.conf
       file are now stored in the cups-files.conf(5) instead in order to  pre‐
       vent certain types of privilege escalation attacks.

       Each  line  in the file can be a configuration directive, a blank line,
       or a comment. Comment lines start with the # character. The  configura‐
       tion  directives are intentionally similar to those used by the popular
       Apache web server software and are described below.

DIRECTIVES
       The following directives are understood by cupsd(8).  Consult  the  on-
       line help for detailed descriptions:

       AccessLogLevel config

       AccessLogLevel actions

       AccessLogLevel all
	    Specifies the logging level for the AccessLog file.

       Allow all

       Allow none

       Allow host.domain.com

       Allow *.domain.com

       Allow ip-address

       Allow ip-address/netmask

       Allow ip-address/mm

       Allow @IF(name)

       Allow @LOCAL
	    Allows access from the named hosts or addresses.

       AuthType None

       AuthType Basic

       AuthType BasicDigest

       AuthType Digest

       AuthType Negotiate
	    Specifies  the  authentication  type  (None,  Basic,  BasicDigest,
	    Digest, Negotiate)

       AutoPurgeJobs Yes

       AutoPurgeJobs No
	    Specifies whether to purge job history data automatically when  it
	    is no longer required for quotas.

       BrowseLocalProtocols [All] [DNSSD]
	    Specifies the protocols to use for local printer sharing.

       BrowseWebIF Yes

       BrowseWebIF No
	    Specifies whether the CUPS web interface is advertised via DNS-SD.

       Browsing Yes

       Browsing No
	    Specifies whether or not shared printers should be advertised.

       Classification banner
	    Specifies the security classification of the server.

       ClassifyOverride Yes

       ClassifyOverride No
	    Specifies whether to allow users to override the classification of
	    individual print jobs.

       DefaultAuthType Basic

       DefaultAuthType BasicDigest

       DefaultAuthType Digest

       DefaultAuthType Negotiate
	    Specifies the default type of authentication to use.

       DefaultEncryption Never

       DefaultEncryption IfRequested

       DefaultEncryption Required
	    Specifies  the  type  of  encryption  to  use  for	 authenticated
	    requests.

       DefaultLanguage locale
	    Specifies the default language to use for text and web content.

       DefaultPaperSize Auto

       DefaultPaperSize None

       DefaultPaperSize sizename
	    Specifies the default paper size for new print queues. "Auto" uses
	    a locale- specific default, while "None"  specifies	 there	is  no
	    default paper size.

       DefaultPolicy policy-name
	    Specifies the default access policy to use.

       DefaultShared Yes

       DefaultShared No
	    Specifies whether local printers are shared by default.

       Deny all

       Deny none

       Deny host.domain.com

       Deny *.domain.com

       Deny ip-address

       Deny ip-address/netmask

       Deny ip-address/mm

       Deny @IF(name)

       Deny @LOCAL
	    Denies access to the named host or address.

       DirtyCleanInterval seconds
	    Specifies the delay for updating of configuration and state files.
	    A value of 0 causes the update to happen as soon as possible, typ‐
	    ically within a few milliseconds.

       Encryption IfRequested

       Encryption Never

       Encryption Required
	    Specifies  the level of encryption that is required for a particu‐
	    lar location.

       FilterLimit limit
	    Specifies the maximum cost of filters that are run concurrently.

       FilterNice nice-value
	    Specifies the scheduling priority ("nice" value) of	 filters  that
	    are run to print a job.

       GSSServiceName name
	    Specifies the service name when using Kerberos authentication. The
	    default service name is "http".

       HostNameLookups On

       HostNameLookups Off

       HostNameLookups Double
	    Specifies  whether	or  not	 to  do	 reverse  lookups  on	client
	    addresses.

       Include filename
	    Includes the named file.

       JobKillDelay seconds
	    Specifies the number of seconds to wait before killing the filters
	    and backend associated with a canceled or held job.

       JobPrivateAccess all

       JobPrivateAccess default

       JobPrivateAccess {user|@group|@ACL|@OWNER|@SYSTEM}+
	    Specifies an access list for a job's private values. The "default"
	    access  list  is  "@OWNER  @SYSTEM".  "@ACL" maps to the printer's
	    requesting-user-name-allowed or  requesting-user-name-denied  val‐
	    ues.

       JobPrivateValues all

       JobPrivateValues default

       JobPrivateValues none

       JobPrivateValues attribute-name-1 [ ... attribute-name-N ]
	    Specifies  the  list  of job values to make private. The "default"
	    values are "job-name", "job-originating-host-name", and "job-orig‐
	    inating-user-name".

       JobRetryInterval seconds
	    Specifies the interval between retries of jobs in seconds.

       JobRetryLimit count
	    Specifies the number of retries that are done for jobs.

       KeepAlive Yes

       KeepAlive No
	    Specifies whether to support HTTP keep-alive connections.

       KeepAliveTimeout seconds
	    Specifies the amount of time that connections are kept alive.

       <Limit operations> ... </Limit>
	    Specifies  the IPP operations that are being limited inside a pol‐
	    icy.

       <Limit methods> ... </Limit>

       <LimitExcept methods> ... </LimitExcept>
	    Specifies the HTTP methods that are being limited inside  a	 loca‐
	    tion.

       LimitRequestBody
	    Specifies the maximum size of any print job request.

       Listen ip-address:port

       Listen *:port

       Listen /path/to/domain/socket
	    Listens to the specified address and port or domain socket path.

       <Location /path> ... </Location>
	    Specifies access control for the named location.

       LogDebugHistory #-messages
	    Specifies the number of debugging messages that are logged when an
	    error occurs in a print job.

       LogLevel alert

       LogLevel crit

       LogLevel debug2

       LogLevel debug

       LogLevel emerg

       LogLevel error

       LogLevel info

       LogLevel none

       LogLevel notice

       LogLevel warn
	    Specifies the logging level for the ErrorLog file.

       LogTimeFormat standard

       LogTimeFormat usecs
	    Specifies the format of the date and time in the log files.

       MaxClients number
	    Specifies the maximum number of simultaneous clients to support.

       MaxClientsPerHost number
	    Specifies the maximum number of simultaneous  clients  to  support
	    from a single address.

       MaxCopies number
	    Specifies  the  maximum  number of copies that a user can print of
	    each job.

       MaxHoldTime seconds
	    Specifies the maximum time a job may remain	 in  the  "indefinite"
	    hold state before it is canceled. Set to 0 to disable cancellation
	    of held jobs.

       MaxJobs number
	    Specifies the maximum number of simultaneous jobs to support.

       MaxJobsPerPrinter number
	    Specifies the maximum number of simultaneous jobs per  printer  to
	    support.

       MaxJobsPerUser number
	    Specifies the maximum number of simultaneous jobs per user to sup‐
	    port.

       MaxJobTime seconds
	    Specifies the maximum time a job may take to print	before	it  is
	    canceled. The default is 10800 seconds (3 hours). Set to 0 to dis‐
	    able cancellation of "stuck" jobs.

       MaxLogSize number-bytes
	    Specifies the maximum size	of  the	 log  files  before  they  are
	    rotated (0 to disable rotation)

       MaxRequestSize number-bytes
	    Specifies the maximum request/file size in bytes (0 for no limit)

       MultipleOperationTimeout seconds
	    Specifies  the  maximum amount of time to allow between files in a
	    multiple file print job.

       Order allow,deny

       Order deny,allow
	    Specifies  the  order  of  HTTP  access  control  (allow,deny   or
	    deny,allow)

       PageLogFormat format string
	    Specifies the format of page log lines.

       PassEnv variable [... variable]
	    Passes the specified environment variable(s) to child processes.

       <Policy name> ... </Policy>
	    Specifies access control for the named policy.

       Port number
	    Specifies a port number to listen to for HTTP requests.

       PreserveJobFiles Yes

       PreserveJobFiles No
	    Specifies  whether	or  not	 to  preserve job files after they are
	    printed.

       PreserveJobHistory Yes

       PreserveJobHistory No
	    Specifies whether or not to preserve the job  history  after  they
	    are printed.

       PrintcapFormat bsd

       PrintcapFormat plist

       PrintcapFormat solaris
	    Specifies the format of the printcap file.

       ReloadTimeout seconds
	    Specifies  the  amount  of	time to wait for job completion before
	    restarting the scheduler.

       Require group group-name-list

       Require user user-name-list

       Require valid-user
	    Specifies that user or group authentication is required.

       RIPCache bytes
	    Specifies the maximum amount of  memory  to	 use  when  converting
	    images and PostScript files to bitmaps for a printer.

       Satisfy all

       Satisfy any
	    Specifies  whether	all  or	 any limits set for a Location must be
	    satisfied to allow access.

       ServerAdmin user@domain.com
	    Specifies the email address of the server administrator.

       ServerAlias hostname [... hostname]

       ServerAlias *
	    Specifies an alternate name that the server is known by. The  spe‐
	    cial name "*" allows any name to be used.

       ServerName hostname-or-ip-address
	    Specifies the fully-qualified hostname of the server.

       ServerTokens Full

       ServerTokens Major

       ServerTokens Minimal

       ServerTokens Minor

       ServerTokens None

       ServerTokens OS

       ServerTokens ProductOnly
	    Specifies  what  information  is  included in the Server header of
	    HTTP responses.

       SetEnv variable value
	    Set the specified environment variable to be passed to child  pro‐
	    cesses.

       SSLListen
	    Listens  on	 the  specified address and port for encrypted connec‐
	    tions.

       SSLOptions None

       SSLOptions NoEmptyFragments
	    Sets SSL/TLS protocol options for encrypted connections.

       SSLPort
	    Listens on the specified port for encrypted connections.

       StrictConformance Yes

       StrictConformance No
	    Specifies whether  the  scheduler  requires	 clients  to  strictly
	    adhere to the IPP specifications. The default is No.

       SubscriptionPrivateAccess all

       SubscriptionPrivateAccess default

       SubscriptionPrivateAccess {user|@group|@ACL|@OWNER|@SYSTEM}+
	    Specifies  an access list for a subscription's private values. The
	    "default" access list is "@OWNER  @SYSTEM".	 "@ACL"	 maps  to  the
	    printer's  requesting-user-name-allowed  or	 requesting-user-name-
	    denied values.

       SubscriptionPrivateValues all

       SubscriptionPrivateValues default

       SubscriptionPrivateValues none

       SubscriptionPrivateValues attribute-name-1 [ ... attribute-name-N ]
	    Specifies the list of job values to make  private.	The  "default"
	    values  are "notify-events", "notify-pull-method", "notify-recipi‐
	    ent-uri", "notify-subscriber-user-name", and "notify-user-data".

       Timeout seconds
	    Specifies the HTTP request timeout in seconds.

       WebInterface yes

       WebInterface no
	    Specifies whether the web interface is enabled.

SEE ALSO
       classes.conf(5),	   cups-files.conf(5),	  cupsd(8),	mime.convs(5),
       mime.types(5), printers.conf(5), subscriptions.conf(5),
       http://localhost:631/help

COPYRIGHT
       Copyright 2007-2013 by Apple Inc.

8 July 2013			     CUPS			 cupsd.conf(5)
[top]

List of man pages available for OpenMandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net