ATMDUMP(8) Maintenance Commands ATMDUMP(8)NAMEatmdump - capture or generate ATM cells
SYNOPSISatmdump [-i] [ -t type [-g gfc] [-c] ] [itf.]vpi.vci
DESCRIPTIONatmdump captures or generates single ATM cells ("AAL0"). When capturing
cells, a time stamp, the cell header contents, and a hex dump of the
cell payload are shown. When sending cells, the payload type, the
generic flow control (GFC), and the cell loss priority (CLP) can be
In both modes of operation, the interface number, the VPI, and the VCI
have to be specified.
When sending, atmdump expects the cell payload on standard input. If
only less than 48 bytes can be read, the remaining space is padded with
OPTIONS-i displays timestamps as the interval since the last cell recep‐
tion. By default, the absolute time is displayed. This options
is ignored in transmit mode.
selects transmit mode and specifies the payload type. A list of
valid payload type numbers can be obtained by invoking atmdump
without any arguments.
-g gfc specifies the value of the GFC field. gfc has to be in the range
from 0 to 15, default is zero.
-c sets the cell loss priority flag, indicating low priority. By
default, CLP is not set.
Some device drivers may not pass OAM cells transparently.
Werner Almesberger, EPFL ICA <Werner.Almesberger@epfl.ch>
SEE ALSOatmdiag(8), clip(8), sonetdiag(8)Linux April 26, 2000 ATMDUMP(8)