Test::Harness::StPerl(Programmers RefereTest::Harness::Straps(3p)NAMETest::Harness::Straps - detailed analysis of test results
SYNOPSIS
use Test::Harness::Straps;
my $strap = Test::Harness::Straps->new;
# Various ways to interpret a test
my %results = $strap->analyze($name, \@test_output);
my %results = $strap->analyze_fh($name, $test_filehandle);
my %results = $strap->analyze_file($test_file);
# UNIMPLEMENTED
my %total = $strap->total_results;
# Altering the behavior of the strap UNIMPLEMENTED
my $verbose_output = $strap->dump_verbose();
$strap->dump_verbose_fh($output_filehandle);
DESCRIPTION
THIS IS ALPHA SOFTWARE in that the interface is subject to
change in incompatible ways. It is otherwise stable.
Test::Harness is limited to printing out its results. This
makes analysis of the test results difficult for anything
but a human. To make it easier for programs to work with
test results, we provide Test::Harness::Straps. Instead of
printing the results, straps provide them as raw data. You
can also configure how the tests are to be run.
The interface is currently incomplete. Please contact the
author if you'd like a feature added or something change or
just have comments.
CONSTRUCTIONnew()
my $strap = Test::Harness::Straps->new;
Initialize a new strap.
$strap->_init
$strap->_init;
Initialize the internal state of a strap to make it ready
for parsing.
ANALYSISperl v5.8.8 2005-02-05 1
Test::Harness::StPerl(Programmers RefereTest::Harness::Straps(3p)
$strap->analyze( $name, \@output_lines )
my %results = $strap->analyze($name, \@test_output);
Analyzes the output of a single test, assigning it the given
$name for use in the total report. Returns the %results of
the test. See Results.
@test_output should be the raw output from the test, includ-
ing newlines.
$strap->analyze_fh( $name, $test_filehandle )
my %results = $strap->analyze_fh($name, $test_filehandle);
Like "analyze", but it reads from the given filehandle.
$strap->analyze_file( $test_file )
my %results = $strap->analyze_file($test_file);
Like "analyze", but it runs the given $test_file and parses
its results. It will also use that name for the total
report.
$strap->_command_line( $file )
Returns the full command line that will be run to test
$file.
$strap->_command()
Returns the command that runs the test. Combine this with
"_switches()" to build a command line.
Typically this is $^X, but you can set $ENV{HARNESS_PERL} to
use a different Perl than what you're running the harness
under. This might be to run a threaded Perl, for example.
You can also overload this method if you've built your own
strap subclass, such as a PHP interpreter for a PHP-based
strap.
$strap->_switches( $file )
Formats and returns the switches necessary to run the test.
$strap->_cleaned_switches( @switches_from_user )
Returns only defined, non-blank, trimmed switches from the
parms passed.
perl v5.8.8 2005-02-05 2
Test::Harness::StPerl(Programmers RefereTest::Harness::Straps(3p)
$strap->_INC2PERL5LIB
local $ENV{PERL5LIB} = $self->_INC2PERL5LIB;
Takes the current value of @INC and turns it into something
suitable for putting onto "PERL5LIB".
$strap->_filtered_INC()
my @filtered_inc = $self->_filtered_INC;
Shortens @INC by removing redundant and unnecessary entries.
Necessary for OSes with limited command line lengths, like
VMS.
$strap->_restore_PERL5LIB()
$self->_restore_PERL5LIB;
This restores the original value of the "PERL5LIB" environ-
ment variable. Necessary on VMS, otherwise a no-op.
Parsing
Methods for identifying what sort of line you're looking at.
"_is_diagnostic"
my $is_diagnostic = $strap->_is_diagnostic($line, \$comment);
Checks if the given line is a comment. If so, it will place
it into $comment (sans #).
"_is_header"
my $is_header = $strap->_is_header($line);
Checks if the given line is a header (1..M) line. If so, it
places how many tests there will be in "$strap->{max}", a
list of which tests are todo in "$strap->{todo}" and if the
whole test was skipped "$strap->{skip_all}" contains the
reason.
"_is_bail_out"
my $is_bail_out = $strap->_is_bail_out($line, \$reason);
Checks if the line is a "Bail out!". Places the reason for
bailing (if any) in $reason.
perl v5.8.8 2005-02-05 3
Test::Harness::StPerl(Programmers RefereTest::Harness::Straps(3p)
"_reset_file_state"
$strap->_reset_file_state;
Resets things like "$strap->{max}" , "$strap->{skip_all}",
etc. so it's ready to parse the next file.
Results
The %results returned from "analyze()" contain the following
information:
passing true if the whole test is considered a pass
(or skipped), false if its a failure
exit the exit code of the test run, if from a file
wait the wait code of the test run, if from a file
max total tests which should have been run
seen total tests actually seen
skip_all if the whole test was skipped, this will
contain the reason.
ok number of tests which passed
(including todo and skips)
todo number of todo tests seen
bonus number of todo tests which
unexpectedly passed
skip number of tests skipped
So a successful test should have max == seen == ok.
There is one final item, the details.
details an array ref reporting the result of
each test looks like this:
$results{details}[$test_num - 1] =
{ ok => is the test considered ok?
actual_ok => did it literally say 'ok'?
name => name of the test (if any)
diagnostics => test diagnostics (if any)
type => 'skip' or 'todo' (if any)
reason => reason for the above (if any)
};
Element 0 of the details is test #1. I tried it with ele-
ment 1 being #1 and 0 being empty, this is less awkward.
EXAMPLES
See examples/mini_harness.plx for an example of use.
perl v5.8.8 2005-02-05 4
Test::Harness::StPerl(Programmers RefereTest::Harness::Straps(3p)AUTHOR
Michael G Schwern "<schwern@pobox.com>", currently main-
tained by Andy Lester "<andy@petdance.com>".
SEE ALSO
Test::Harness
perl v5.8.8 2005-02-05 5