Catalyst::Manual::TutoUser:ConCatalyst::Manual::Tutorial::05_Authentication(3)NAMECatalyst::Manual::Tutorial::05_Authentication - Catalyst Tutorial -
Chapter 5: Authentication
OVERVIEW
This is Chapter 5 of 10 for the Catalyst tutorial.
Tutorial Overview
1. Introduction
2. Catalyst Basics
3. More Catalyst Basics
4. Basic CRUD
5. 05_Authentication
6. Authorization
7. Debugging
8. Testing
9. Advanced CRUD
10. Appendices
DESCRIPTION
Now that we finally have a simple yet functional application, we can
focus on providing authentication (with authorization coming next in
Chapter 6).
This chapter of the tutorial is divided into two main sections: 1)
basic, cleartext authentication and 2) hash-based authentication.
Source code for the tutorial in included in the /home/catalyst/Final
directory of the Tutorial Virtual machine (one subdirectory per
chapter). There are also instructions for downloading the code in
Catalyst::Manual::Tutorial::01_Intro.
BASIC AUTHENTICATION
This section explores how to add authentication logic to a Catalyst
application.
Add Users and Roles to the Database
First, we add both user and role information to the database (we will
add the role information here although it will not be used until the
authorization section, Chapter 6). Create a new SQL script file by
opening "myapp02.sql" in your editor and insert:
--
-- Add users and role tables, along with a many-to-many join table
--
PRAGMA foreign_keys = ON;
CREATE TABLE users (
id INTEGER PRIMARY KEY,
username TEXT,
password TEXT,
email_address TEXT,
first_name TEXT,
last_name TEXT,
active INTEGER
);
CREATE TABLE role (
id INTEGER PRIMARY KEY,
role TEXT
);
CREATE TABLE user_role (
user_id INTEGER REFERENCES users(id) ON DELETE CASCADE ON UPDATE CASCADE,
role_id INTEGER REFERENCES role(id) ON DELETE CASCADE ON UPDATE CASCADE,
PRIMARY KEY (user_id, role_id)
);
--
-- Load up some initial test data
--
INSERT INTO users VALUES (1, 'test01', 'mypass', 't01@na.com', 'Joe', 'Blow', 1);
INSERT INTO users VALUES (2, 'test02', 'mypass', 't02@na.com', 'Jane', 'Doe', 1);
INSERT INTO users VALUES (3, 'test03', 'mypass', 't03@na.com', 'No', 'Go', 0);
INSERT INTO role VALUES (1, 'user');
INSERT INTO role VALUES (2, 'admin');
INSERT INTO user_role VALUES (1, 1);
INSERT INTO user_role VALUES (1, 2);
INSERT INTO user_role VALUES (2, 1);
INSERT INTO user_role VALUES (3, 1);
Then load this into the "myapp.db" database with the following command:
$ sqlite3 myapp.db < myapp02.sql
Add User and Role Information to DBIC Schema
Although we could manually edit the DBIC schema information to include
the new tables added in the previous step, let's use the
"create=static" option on the DBIC model helper to do most of the work
for us:
$ script/myapp_create.pl model DB DBIC::Schema MyApp::Schema \
create=static components=TimeStamp dbi:SQLite:myapp.db \
on_connect_do="PRAGMA foreign_keys = ON"
exists "/home/catalyst/dev/MyApp/script/../lib/MyApp/Model"
exists "/home/catalyst/dev/MyApp/script/../t"
Dumping manual schema for MyApp::Schema to directory /home/catalyst/dev/MyApp/script/../lib ...
Schema dump completed.
exists "/home/catalyst/dev/MyApp/script/../lib/MyApp/Model/DB.pm"
$
$ ls lib/MyApp/Schema/Result
Author.pm BookAuthor.pm Book.pm Role.pm User.pm UserRole.pm
Notice how the helper has added three new table-specific Result Source
files to the "lib/MyApp/Schema/Result" directory. And, more
importantly, even if there were changes to the existing result source
files, those changes would have only been written above the "# DO NOT
MODIFY THIS OR ANYTHING ABOVE!" comment and your hand-edited
enhancements would have been preserved.
Speaking of "hand-edited enhancements," we should now add the
"many_to_many" relationship information to the User Result Source file.
As with the Book, BookAuthor, and Author files in Chapter 3,
DBIx::Class::Schema::Loader has automatically created the "has_many"
and "belongs_to" relationships for the new User, UserRole, and Role
tables. However, as a convenience for mapping Users to their assigned
roles (see Chapter 6), we will also manually add a "many_to_many"
relationship. Edit "lib/MyApp/Schema/Result/User.pm" add the following
information between the "# DO NOT MODIFY THIS OR ANYTHING ABOVE!"
comment and the closing "1;":
# many_to_many():
# args:
# 1) Name of relationship, DBIC will create accessor with this name
# 2) Name of has_many() relationship this many_to_many() is shortcut for
# 3) Name of belongs_to() relationship in model class of has_many() above
# You must already have the has_many() defined to use a many_to_many().
__PACKAGE__->many_to_many(roles => 'user_roles', 'role');
The code for this update is obviously very similar to the edits we made
to the "Book" and "Author" classes created in Chapter 3 with one
exception: we only defined the "many_to_many" relationship in one
direction. Whereas we felt that we would want to map Authors to Books
AND Books to Authors, here we are only adding the convenience
"many_to_many" in the Users to Roles direction.
Note that we do not need to make any change to the
"lib/MyApp/Schema.pm" schema file. It simply tells DBIC to load all of
the Result Class and ResultSet Class files it finds below the
"lib/MyApp/Schema" directory, so it will automatically pick up our new
table information.
Sanity-Check of the Development Server Reload
We aren't ready to try out the authentication just yet; we only want to
do a quick check to be sure our model loads correctly. Assuming that
you are following along and using the "-r" option on "myapp_server.pl",
then the development server should automatically reload (if not, press
"Ctrl-C" to break out of the server if it's running and then enter
"script/myapp_server.pl" to start it). Look for the three new model
objects in the startup debug output:
...
.-------------------------------------------------------------------+----------.
| Class | Type |
+-------------------------------------------------------------------+----------+
| MyApp::Controller::Books | instance |
| MyApp::Controller::Root | instance |
| MyApp::Model::DB | instance |
| MyApp::Model::DB::Author | class |
| MyApp::Model::DB::Book | class |
| MyApp::Model::DB::BookAuthor | class |
| MyApp::Model::DB::Role | class |
| MyApp::Model::DB::User | class |
| MyApp::Model::DB::UserRole | class |
| MyApp::View::HTML | instance |
'-------------------------------------------------------------------+----------'
...
Again, notice that your "Result Class" classes have been "re-loaded" by
Catalyst under "MyApp::Model".
Include Authentication and Session Plugins
Edit "lib/MyApp.pm" and update it as follows (everything below
"StackTrace" is new):
# Load plugins
use Catalyst qw/
-Debug
ConfigLoader
Static::Simple
StackTrace
Authentication
Session
Session::Store::File
Session::State::Cookie
/;
Note: As discussed in Chapter 3, different versions of
"Catalyst::Devel" have used a variety of methods to load the plugins,
but we are going to use the current Catalyst 5.9 practice of putting
them on the "use Catalyst" line.
The "Authentication" plugin supports Authentication while the "Session"
plugins are required to maintain state across multiple HTTP requests.
Note that the only required Authentication class is the main one. This
is a change that occurred in version 0.09999_01 of the Authentication
plugin. You do not need to specify a particular Authentication::Store
or "Authentication::Credential" you want to use. Instead, indicate the
Store and Credential you want to use in your application configuration
(see below).
Make sure you include the additional plugins as new dependencies in the
Makefile.PL file something like this:
requires 'Catalyst::Plugin::Authentication';
requires 'Catalyst::Plugin::Session';
requires 'Catalyst::Plugin::Session::Store::File';
requires 'Catalyst::Plugin::Session::State::Cookie';
Note that there are several options for Session::Store.
Session::Store::Memcached is generally a good choice if you are on
Unix. If you are running on Windows Session::Store::File is fine.
Consult Session::Store and its subclasses for additional information
and options (for example to use a database-backed session store).
Configure Authentication
There are a variety of ways to provide configuration information to
Catalyst::Plugin::Authentication. Here we will use
Catalyst::Authentication::Realm::SimpleDB because it automatically sets
a reasonable set of defaults for us. (Note: the "SimpleDB" here has
nothing to do with the SimpleDB offered in Amazon's web services
offerings -- here we are only talking about a "simple" way to use your
DB as an authentication backend.) Open "lib/MyApp.pm" and place the
following text above the call to "__PACKAGE__->setup();":
# Configure SimpleDB Authentication
__PACKAGE__->config(
'Plugin::Authentication' => {
default => {
class => 'SimpleDB',
user_model => 'DB::User',
password_type => 'clear',
},
},
);
We could have placed this configuration in "myapp.conf", but placing it
in "lib/MyApp.pm" is probably a better place since it's not likely
something that users of your application will want to change during
deployment (or you could use a mixture: leave "class" and "user_model"
defined in "lib/MyApp.pm" as we show above, but place "password_type"
in "myapp.conf" to allow the type of password to be easily modified
during deployment). We will stick with putting all of the
authentication-related configuration in "lib/MyApp.pm" for the
tutorial, but if you wish to use "myapp.conf", just convert to the
following code:
<Plugin::Authentication>
<default>
password_type clear
user_model DB::User
class SimpleDB
</default>
</Plugin::Authentication>
TIP: Here is a short script that will dump the contents of
"MyApp-"config> to Config::General format in "myapp.conf":
$ CATALYST_DEBUG=0 perl -Ilib -e 'use MyApp; use Config::General;
Config::General->new->save_file("myapp.conf", MyApp->config);'
HOWEVER, if you try out the command above, be sure to delete the
"myapp.conf" command. Otherwise, you will wind up with duplicate
configurations.
NOTE: Because we are using SimpleDB along with a database layout that
complies with its default assumptions: we don't need to specify the
names of the columns where our username and password information is
stored (hence, the "Simple" part of "SimpleDB"). That being said,
SimpleDB lets you specify that type of information if you need to.
Take a look at "Catalyst::Authentication::Realm::SimpleDB" for details.
Add Login and Logout Controllers
Use the Catalyst create script to create two stub controller files:
$ script/myapp_create.pl controller Login
$ script/myapp_create.pl controller Logout
You could easily use a single controller here. For example, you could
have a "User" controller with both "login" and "logout" actions.
Remember, Catalyst is designed to be very flexible, and leaves such
matters up to you, the designer and programmer.
Then open "lib/MyApp/Controller/Login.pm", and update the definition of
"sub index" to match:
=head2 index
Login logic
=cut
sub index :Path :Args(0) {
my ($self, $c) = @_;
# Get the username and password from form
my $username = $c->request->params->{username};
my $password = $c->request->params->{password};
# If the username and password values were found in form
if ($username && $password) {
# Attempt to log the user in
if ($c->authenticate({ username => $username,
password => $password } )) {
# If successful, then let them use the application
$c->response->redirect($c->uri_for(
$c->controller('Books')->action_for('list')));
return;
} else {
# Set an error message
$c->stash(error_msg => "Bad username or password.");
}
} else {
# Set an error message
$c->stash(error_msg => "Empty username or password.")
unless ($c->user_exists);
}
# If either of above don't work out, send to the login page
$c->stash(template => 'login.tt2');
}
This controller fetches the "username" and "password" values from the
login form and attempts to authenticate the user. If successful, it
redirects the user to the book list page. If the login fails, the user
will stay at the login page and receive an error message. If the
"username" and "password" values are not present in the form, the user
will be taken to the empty login form.
Note that we could have used something like ""sub default :Path"",
however, it is generally recommended (partly for historical reasons,
and partly for code clarity) only to use "default" in
"MyApp::Controller::Root", and then mainly to generate the 404 not
found page for the application.
Instead, we are using ""sub somename :Path :Args(0) {...}"" here to
specifically match the URL "/login". "Path" actions (aka, "literal
actions") create URI matches relative to the namespace of the
controller where they are defined. Although "Path" supports arguments
that allow relative and absolute paths to be defined, here we use an
empty "Path" definition to match on just the name of the controller
itself. The method name, "index", is arbitrary. We make the match even
more specific with the :Args(0) action modifier -- this forces the
match on only "/login", not "/login/somethingelse".
Next, update the corresponding method in
"lib/MyApp/Controller/Logout.pm" to match:
=head2 index
Logout logic
=cut
sub index :Path :Args(0) {
my ($self, $c) = @_;
# Clear the user's state
$c->logout;
# Send the user to the starting point
$c->response->redirect($c->uri_for('/'));
}
Add a Login Form TT Template Page
Create a login form by opening "root/src/login.tt2" and inserting:
[% META title = 'Login' %]
<!-- Login form -->
<form method="post" action="[% c.uri_for('/login') %]">
<table>
<tr>
<td>Username:</td>
<td><input type="text" name="username" size="40" /></td>
</tr>
<tr>
<td>Password:</td>
<td><input type="password" name="password" size="40" /></td>
</tr>
<tr>
<td colspan="2"><input type="submit" name="submit" value="Submit" /></td>
</tr>
</table>
</form>
Add Valid User Check
We need something that provides enforcement for the authentication
mechanism -- a global mechanism that prevents users who have not passed
authentication from reaching any pages except the login page. This is
generally done via an "auto" action/method in
"lib/MyApp/Controller/Root.pm".
Edit the existing "lib/MyApp/Controller/Root.pm" class file and insert
the following method:
=head2 auto
Check if there is a user and, if not, forward to login page
=cut
# Note that 'auto' runs after 'begin' but before your actions and that
# 'auto's "chain" (all from application path to most specific class are run)
# See the 'Actions' section of 'Catalyst::Manual::Intro' for more info.
sub auto :Private {
my ($self, $c) = @_;
# Allow unauthenticated users to reach the login page. This
# allows unauthenticated users to reach any action in the Login
# controller. To lock it down to a single action, we could use:
# if ($c->action eq $c->controller('Login')->action_for('index'))
# to only allow unauthenticated access to the 'index' action we
# added above.
if ($c->controller eq $c->controller('Login')) {
return 1;
}
# If a user doesn't exist, force login
if (!$c->user_exists) {
# Dump a log message to the development server debug output
$c->log->debug('***Root::auto User not found, forwarding to /login');
# Redirect the user to the login page
$c->response->redirect($c->uri_for('/login'));
# Return 0 to cancel 'post-auto' processing and prevent use of application
return 0;
}
# User found, so return 1 to continue with processing after this 'auto'
return 1;
}
As discussed in "CREATE A CATALYST CONTROLLER" in
Catalyst::Manual::Tutorial::03_MoreCatalystBasics, every "auto" method
from the application/root controller down to the most specific
controller will be called. By placing the authentication enforcement
code inside the "auto" method of "lib/MyApp/Controller/Root.pm" (or
"lib/MyApp.pm"), it will be called for every request that is received
by the entire application.
Displaying Content Only to Authenticated Users
Let's say you want to provide some information on the login page that
changes depending on whether the user has authenticated yet. To do
this, open "root/src/login.tt2" in your editor and add the following
lines to the bottom of the file:
...
<p>
[%
# This code illustrates how certain parts of the TT
# template will only be shown to users who have logged in
%]
[% IF c.user_exists %]
Please Note: You are already logged in as '[% c.user.username %]'.
You can <a href="[% c.uri_for('/logout') %]">logout</a> here.
[% ELSE %]
You need to log in to use this application.
[% END %]
[%#
Note that this whole block is a comment because the "#" appears
immediate after the "[%" (with no spaces in between). Although it
can be a handy way to temporarily "comment out" a whole block of
TT code, it's probably a little too subtle for use in "normal"
comments.
%]
</p>
Although most of the code is comments, the middle few lines provide a
"you are already logged in" reminder if the user returns to the login
page after they have already authenticated. For users who have not yet
authenticated, a "You need to log in..." message is displayed (note the
use of an IF-THEN-ELSE construct in TT).
Try Out Authentication
The development server should have reloaded each time we edited one of
the Controllers in the previous section. Now try going to
<http://localhost:3000/books/list> and you should be redirected to the
login page, hitting Shift+Reload or Ctrl+Reload if necessary (the "You
are already logged in" message should not appear -- if it does, click
the "logout" button and try again). Note the "***Root::auto User not
found..." debug message in the development server output. Enter
username "test01" and password "mypass", and you should be taken to the
Book List page.
IMPORTANT NOTE: If you are having issues with authentication on
Internet Explorer (or potentially other browsers), be sure to check the
system clocks on both your server and client machines. Internet
Explorer is very picky about timestamps for cookies. You can use the
"ntpq -p" command on the Tutorial Virtual Machine to check time sync
and/or use the following command to force a sync:
sudo ntpdate-debian
Or, depending on your firewall configuration, try it with "-u":
sudo ntpdate-debian -u
Note: NTP can be a little more finicky about firewalls because it uses
UDP vs. the more common TCP that you see with most Internet protocols.
Worse case, you might have to manually set the time on your development
box instead of using NTP.
Open "root/src/books/list.tt2" and add the following lines to the
bottom (below the closing </table> tag):
...
<p>
<a href="[% c.uri_for('/login') %]">Login</a>
<a href="[% c.uri_for(c.controller.action_for('form_create')) %]">Create</a>
</p>
Reload your browser and you should now see a "Login" and "Create" links
at the bottom of the page (as mentioned earlier, you can update
template files without a development server reload). Click the first
link to return to the login page. This time you should see the "You
are already logged in" message.
Finally, click the "You can logout here" link on the "/login" page.
You should stay at the login page, but the message should change to
"You need to log in to use this application."
USING PASSWORD HASHES
In this section we increase the security of our system by converting
from cleartext passwords to SHA-1 password hashes that include a random
"salt" value to make them extremely difficult to crack, even with
dictionary and "rainbow table" attacks.
Note: This section is optional. You can skip it and the rest of the
tutorial will function normally.
Be aware that even with the techniques shown in this section, the
browser still transmits the passwords in cleartext to your application.
We are just avoiding the storage of cleartext passwords in the database
by using a salted SHA-1 hash. If you are concerned about cleartext
passwords between the browser and your application, consider using
SSL/TLS, made easy with modules such as Catalyst::Plugin:RequireSSL and
Catalyst::ActionRole::RequireSSL.
Re-Run the DBIC::Schema Model Helper to Include
DBIx::Class::PassphraseColumn
Let's re-run the model helper to have it include
DBIx::Class::PassphraseColumn in all of the Result Classes it generates
for us. Simply use the same command we saw in Chapters 3 and 4, but
add ",PassphraseColumn" to the "components" argument:
$ script/myapp_create.pl model DB DBIC::Schema MyApp::Schema \
create=static components=TimeStamp,PassphraseColumn dbi:SQLite:myapp.db \
on_connect_do="PRAGMA foreign_keys = ON"
If you then open one of the Result Classes, you will see that it
includes PassphraseColumn in the "load_components" line. Take a look
at "lib/MyApp/Schema/Result/User.pm" since that's the main class where
we want to use hashed and salted passwords:
__PACKAGE__->load_components("InflateColumn::DateTime", "TimeStamp", "PassphraseColumn");
Modify the "password" Column to Use PassphraseColumn
Open the file "lib/MyApp/Schema/Result/User.pm" and enter the following
text below the "# DO NOT MODIFY THIS OR ANYTHING ABOVE!" line but above
the closing "1;":
# Have the 'password' column use a SHA-1 hash and 20-byte salt
# with RFC 2307 encoding; Generate the 'check_password" method
__PACKAGE__->add_columns(
'password' => {
passphrase => 'rfc2307',
passphrase_class => 'SaltedDigest',
passphrase_args => {
algorithm => 'SHA-1',
salt_random => 20.
},
passphrase_check_method => 'check_password',
},
);
This redefines the automatically generated definition for the password
fields at the top of the Result Class file to now use PassphraseColumn
logic, storing passwords in RFC 2307 format ("passphrase" is set to
"rfc2307"). "passphrase_class" can be set to the name of any
"Authen::Passphrase::*" class, such as "SaltedDigest" to use
Authen::Passphrase::SaltedDigest, or "BlowfishCrypt" to use
Authen::Passphrase::BlowfishCrypt. "passphrase_args" is then used to
customize the passphrase class you selected. Here we specified the
digest algorithm to use as "SHA-1" and the size of the salt to use, but
we could have also specified any other option the selected passphrase
class supports.
Load Hashed Passwords in the Database
Next, let's create a quick script to load some hashed and salted
passwords into the "password" column of our "users" table. Open the
file "set_hashed_passwords.pl" in your editor and enter the following
text:
#!/usr/bin/perl
use strict;
use warnings;
use MyApp::Schema;
my $schema = MyApp::Schema->connect('dbi:SQLite:myapp.db');
my @users = $schema->resultset('User')->all;
foreach my $user (@users) {
$user->password('mypass');
$user->update;
}
PassphraseColumn lets us simply call "$user-"check_password($password)>
to see if the user has supplied the correct password, or, as we show
above, call "$user-"update($new_password)> to update the hashed
password stored for this user.
Then run the following command:
$ DBIC_TRACE=1 perl -Ilib set_hashed_passwords.pl
We had to use the "-Ilib" argument to tell Perl to look under the "lib"
directory for our "MyApp::Schema" model.
The DBIC_TRACE output should show that the update worked:
$ DBIC_TRACE=1 perl -Ilib set_hashed_passwords.pl
SELECT me.id, me.username, me.password, me.email_address,
me.first_name, me.last_name, me.active FROM users me:
UPDATE users SET password = ? WHERE ( id = ? ):
'{SSHA}esgz64CpHMo8pMfgIIszP13ft23z/zio04aCwNdm0wc6MDeloMUH4g==', '1'
UPDATE users SET password = ? WHERE ( id = ? ):
'{SSHA}FpGhpCJus+Ea9ne4ww8404HH+hJKW/fW+bAv1v6FuRUy2G7I2aoTRQ==', '2'
UPDATE users SET password = ? WHERE ( id = ? ):
'{SSHA}ZyGlpiHls8qFBSbHr3r5t/iqcZE602XLMbkSVRRNl6rF8imv1abQVg==', '3'
But we can further confirm our actions by dumping the users table:
$ sqlite3 myapp.db "select * from users"
1|test01|{SSHA}esgz64CpHMo8pMfgIIszP13ft23z/zio04aCwNdm0wc6MDeloMUH4g==|t01@na.com|Joe|Blow|1
2|test02|{SSHA}FpGhpCJus+Ea9ne4ww8404HH+hJKW/fW+bAv1v6FuRUy2G7I2aoTRQ==|t02@na.com|Jane|Doe|1
3|test03|{SSHA}ZyGlpiHls8qFBSbHr3r5t/iqcZE602XLMbkSVRRNl6rF8imv1abQVg==|t03@na.com|No|Go|0
As you can see, the passwords are much harder to steal from the
database (not only are the hashes stored, but every hash is different
even though the passwords are the same because of the added "salt"
value). Also note that this demonstrates how to use a DBIx::Class
model outside of your web application -- a very useful feature in many
situations.
Enable Hashed and Salted Passwords
Edit "lib/MyApp.pm" and update the config() section for
"Plugin::Authentication" it to match the following text (the only
change is to the "password_type" field):
# Configure SimpleDB Authentication
__PACKAGE__->config(
'Plugin::Authentication' => {
default => {
class => 'SimpleDB',
user_model => 'DB::User',
password_type => 'self_check',
},
},
);
The use of "self_check" will cause
Catalyst::Plugin::Authentication::Store::DBIC to call the
"check_password" method we enabled on our "password" columns.
Try Out the Hashed Passwords
The development server should restart as soon as your save the
"lib/MyApp.pm" file in the previous section. You should now be able to
go to <http://localhost:3000/books/list> and login as before. When
done, click the "logout" link on the login page (or point your browser
at <http://localhost:3000/logout>).
USING THE SESSION FOR FLASH
As discussed in the previous chapter of the tutorial, "flash" allows
you to set variables in a way that is very similar to "stash", but it
will remain set across multiple requests. Once the value is read, it
is cleared (unless reset). Although "flash" has nothing to do with
authentication, it does leverage the same session plugins. Now that
those plugins are enabled, let's go back and update the "delete and
redirect with query parameters" code seen at the end of the Basic CRUD
chapter of the tutorial to take advantage of "flash".
First, open "lib/MyApp/Controller/Books.pm" and modify "sub delete" to
match the following (everything after the model search line of code has
changed):
=head2 delete
Delete a book
=cut
sub delete :Chained('object') :PathPart('delete') :Args(0) {
my ($self, $c) = @_;
# Use the book object saved by 'object' and delete it along
# with related 'book_authors' entries
$c->stash->{object}->delete;
# Use 'flash' to save information across requests until it's read
$c->flash->{status_msg} = "Book deleted";
# Redirect the user back to the list page
$c->response->redirect($c->uri_for($self->action_for('list')));
}
Next, open "root/src/wrapper.tt2" and update the TT code to pull from
flash vs. the "status_msg" query parameter:
...
<div id="content">
[%# Status and error messages %]
<span class="message">[% status_msg || c.flash.status_msg %]</span>
<span class="error">[% error_msg %]</span>
[%# This is where TT will stick all of your template's contents. -%]
[% content %]
</div><!-- end content -->
...
Although the sample above only shows the "content" div, leave the rest
of the file intact -- the only change we made to replace "||
c.request.params.status_msg" with "c.flash.status_msg" in the "<span
class="message">" line.
Try Out Flash
Authenticate using the login screen and then point your browser to
<http://localhost:3000/books/url_create/Test/1/4> to create an extra
several books. Click the "Return to list" link and delete one of the
"Test" books you just added. The "flash" mechanism should retain our
"Book deleted" status message across the redirect.
NOTE: While "flash" will save information across multiple requests, it
does get cleared the first time it is read. In general, this is
exactly what you want -- the "flash" message will get displayed on the
next screen where it's appropriate, but it won't "keep showing up"
after that first time (unless you reset it). Please refer to
Catalyst::Plugin::Session for additional information.
Note: There is also a "flash-to-stash" feature that will automatically
load the contents the contents of flash into stash, allowing us to use
the more typical "c.flash.status_msg" in our TT template in lieu of the
more verbose "status_msg || c.flash.status_msg" we used above. Consult
Catalyst::Plugin::Session for additional information.
Switch To Catalyst::Plugin::StatusMessages
Although the query parameter technique we used in Chapter 4 and the
"flash" approach we used above will work in most cases, they both have
their drawbacks. The query parameters can leave the status message on
the screen longer than it should (for example, if the user hits
refresh). And "flash" can display the wrong message on the wrong
screen (flash just shows the message on the next page for that user...
if the user has multiple windows or tabs open, then the wrong one can
get the status message).
Catalyst::Plugin::StatusMessage is designed to address these
shortcomings. It stores the messages in the user's session (so they
are available across multiple requests), but ties each status message
to a random token. By passing this token across the redirect, we are
no longer relying on a potentially ambiguous "next request" like we do
with flash. And, because the message is deleted the first time it's
displayed, the user can hit refresh and still only see the message a
single time (even though the URL may continue to reference the token,
it's only displayed the first time). The use of "StatusMessage" or a
similar mechanism is recommended for all Catalyst applications.
To enable "StatusMessage", first edit "lib/MyApp.pm" and add
"StatusMessage" to the list of plugins:
use Catalyst qw/
-Debug
ConfigLoader
Static::Simple
StackTrace
Authentication
Session
Session::Store::File
Session::State::Cookie
StatusMessage
/;
Then edit "lib/MyApp/Controller/Books.pm" and modify the "delete"
action to match the following:
sub delete :Chained('object') :PathPart('delete') :Args(0) {
my ($self, $c) = @_;
# Saved the PK id for status_msg below
my $id = $c->stash->{object}->id;
# Use the book object saved by 'object' and delete it along
# with related 'book_authors' entries
$c->stash->{object}->delete;
# Redirect the user back to the list page
$c->response->redirect($c->uri_for($self->action_for('list'),
{mid => $c->set_status_msg("Deleted book $id")}));
}
This uses the "set_status_msg" that the plugin added to $c to save the
message under a random token. (If we wanted to save an error message,
we could have used "set_error_msg".) Because "set_status_msg" and
"set_error_msg" both return the random token, we can assign that value
to the ""mid"" query parameter via "uri_for" as shown above.
Next, we need to make sure that the list page will load display the
message. The easiest way to do this is to take advantage of the
chained dispatch we implemented in Chapter 4. Edit
"lib/MyApp/Controller/Books.pm" again and update the "base" action to
match:
sub base :Chained('/') :PathPart('books') :CaptureArgs(0) {
my ($self, $c) = @_;
# Store the ResultSet in stash so it's available for other methods
$c->stash(resultset => $c->model('DB::Book'));
# Print a message to the debug log
$c->log->debug('*** INSIDE BASE METHOD ***');
# Load status messages
$c->load_status_msgs;
}
That way, anything that chains off "base" will automatically get any
status or error messages loaded into the stash. Let's convert the
"list" action to take advantage of this. Modify the method signature
for "list" from:
sub list :Local {
to:
sub list :Chained('base') :PathParth('list') :Args(0) {
Finally, let's clean up the status/error message code in our wrapper
template. Edit "root/src/wrapper.tt2" and change the "content" div to
match the following:
<div id="content">
[%# Status and error messages %]
<span class="message">[% status_msg %]</span>
<span class="error">[% error_msg %]</span>
[%# This is where TT will stick all of your template's contents. -%]
[% content %]
</div><!-- end content -->
Now go to <http://localhost:3000/books/list> in your browser. Delete
another of the "Test" books you added in the previous step. You should
get redirection from the "delete" action back to the "list" action, but
with a "mid=########" message ID query parameter. The screen should
say "Deleted book #" (where # is the PK id of the book you removed).
However, if you hit refresh in your browser, the status message is no
longer displayed (even though the URL does still contain the message
ID token, it is ignored -- thereby keeping the state of our
status/error messages in sync with the users actions).
You can jump to the next chapter of the tutorial here: Authorization
AUTHOR
Kennedy Clark, "hkclark@gmail.com"
Feel free to contact the author for any errors or suggestions, but the
best way to report issues is via the CPAN RT Bug system at
https://rt.cpan.org/Public/Dist/Display.html?Name=Catalyst-Manual
<https://rt.cpan.org/Public/Dist/Display.html?Name=Catalyst-Manual>.
Copyright 2006-2011, Kennedy Clark, under the Creative Commons
Attribution Share-Alike License Version 3.0
(http://creativecommons.org/licenses/by-sa/3.0/us/
<http://creativecommons.org/licenses/by-sa/3.0/us/>).
perl v5.14.2Catalyst::Manual::Tutorial::05_Authentication(3)