SEM_WAIT man page on OpenSuSE

Man page or keyword search:  
man Server   25941 pages
apropos Keyword Search (all sections)
Output format
OpenSuSE logo
[printable version]

SEM_WAIT(3)		   Linux Programmer's Manual		   SEM_WAIT(3)

NAME
       sem_wait, sem_timedwait, sem_trywait - lock a semaphore

SYNOPSIS
       #include <semaphore.h>

       int sem_wait(sem_t *sem);

       int sem_trywait(sem_t *sem);

       int sem_timedwait(sem_t *sem, const struct timespec *abs_timeout);

       Link with -pthread.

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       sem_timedwait(): _POSIX_C_SOURCE >= 200112L || _XOPEN_SOURCE >= 600

DESCRIPTION
       sem_wait()  decrements (locks) the semaphore pointed to by sem.	If the
       semaphore's value is greater than zero, then  the  decrement  proceeds,
       and  the function returns, immediately.	If the semaphore currently has
       the value zero, then the call blocks until either it  becomes  possible
       to  perform the decrement (i.e., the semaphore value rises above zero),
       or a signal handler interrupts the call.

       sem_trywait() is the same as sem_wait(), except that if	the  decrement
       cannot  be immediately performed, then call returns an error (errno set
       to EAGAIN) instead of blocking.

       sem_timedwait() is the same  as	sem_wait(),  except  that  abs_timeout
       specifies  a  limit on the amount of time that the call should block if
       the decrement cannot be immediately performed.  The  abs_timeout	 argu‐
       ment  points  to a structure that specifies an absolute timeout in sec‐
       onds and nanoseconds since the Epoch, 1970-01-01 00:00:00 +0000	(UTC).
       This structure is defined as follows:

	   struct timespec {
	       time_t tv_sec;	   /* Seconds */
	       long   tv_nsec;	   /* Nanoseconds [0 .. 999999999] */
	   };

       If  the	timeout	 has  already expired by the time of the call, and the
       semaphore could not be locked immediately, then	sem_timedwait()	 fails
       with a timeout error (errno set to ETIMEDOUT).

       If  the	operation  can	be performed immediately, then sem_timedwait()
       never fails with a timeout error, regardless of the value of  abs_time‐
       out.   Furthermore,  the validity of abs_timeout is not checked in this
       case.

RETURN VALUE
       All of these functions return 0 on success; on error, the value of  the
       semaphore  is left unchanged, -1 is returned, and errno is set to indi‐
       cate the error.

ERRORS
       EINTR  The call was interrupted by a signal handler; see signal(7).

       EINVAL sem is not a valid semaphore.

       The following additional error can occur for sem_trywait():

       EAGAIN The operation could not be performed without blocking (i.e., the
	      semaphore currently has the value zero).

       The following additional errors can occur for sem_timedwait():

       EINVAL The  value  of  abs_timeout.tv_nsecs  is less than 0, or greater
	      than or equal to 1000 million.

       ETIMEDOUT
	      The call timed out before the semaphore could be locked.

CONFORMING TO
       POSIX.1-2001.

NOTES
       A signal handler always interrupts a blocked call to one of these func‐
       tions, regardless of the use of the sigaction(2) SA_RESTART flag.

EXAMPLE
       The (somewhat trivial) program shown below operates on an unnamed sema‐
       phore.  The program expects  two	 command-line  arguments.   The	 first
       argument	 specifies  a seconds value that is used to set an alarm timer
       to generate a SIGALRM signal.  This handler performs a  sem_post(3)  to
       increment  the  semaphore  that	is  being  waited  on  in main() using
       sem_timedwait().	 The second command-line argument specifies the length
       of  the	timeout, in seconds, for sem_timedwait().  The following shows
       what happens on two different runs of the program:

	   $ ./a.out 2 3
	   About to call sem_timedwait()
	   sem_post() from handler
	   sem_timedwait() succeeded
	   $ ./a.out 2 1
	   About to call sem_timedwait()
	   sem_timedwait() timed out

   Program source

       #include <unistd.h>
       #include <stdio.h>
       #include <stdlib.h>
       #include <semaphore.h>
       #include <time.h>
       #include <assert.h>
       #include <errno.h>
       #include <signal.h>

       sem_t sem;

       #define handle_error(msg) \
	   do { perror(msg); exit(EXIT_FAILURE); } while (0)

       static void
       handler(int sig)
       {
	   write(STDOUT_FILENO, "sem_post() from handler\n", 24);
	   if (sem_post(&sem) == -1) {
	       write(STDERR_FILENO, "sem_post() failed\n", 18);
	       _exit(EXIT_FAILURE);
	   }
       }

       int
       main(int argc, char *argv[])
       {
	   struct sigaction sa;
	   struct timespec ts;
	   int s;

	   if (argc != 3) {
	       fprintf(stderr, "Usage: %s <alarm-secs> <wait-secs>\n",
		       argv[0]);
	       exit(EXIT_FAILURE);
	   }

	   if (sem_init(&sem, 0, 0) == -1)
	       handle_error("sem_init");

	   /* Establish SIGALRM handler; set alarm timer using argv[1] */

	   sa.sa_handler = handler;
	   sigemptyset(&sa.sa_mask);
	   sa.sa_flags = 0;
	   if (sigaction(SIGALRM, &sa, NULL) == -1)
	       handle_error("sigaction");

	   alarm(atoi(argv[1]));

	   /* Calculate relative interval as current time plus
	      number of seconds given argv[2] */

	   if (clock_gettime(CLOCK_REALTIME, &ts) == -1)
	       handle_error("clock_gettime");

	   ts.tv_sec += atoi(argv[2]);

	   printf("main() about to call sem_timedwait()\n");
	   while ((s = sem_timedwait(&sem, &ts)) == -1 && errno == EINTR)
	       continue;       /* Restart if interrupted by handler */

	   /* Check what happened */

	   if (s == -1) {
	       if (errno == ETIMEDOUT)
		   printf("sem_timedwait() timed out\n");
	       else
		   perror("sem_timedwait");
	   } else
	       printf("sem_timedwait() succeeded\n");

	   exit((s == 0) ? EXIT_SUCCESS : EXIT_FAILURE);
       }

SEE ALSO
       clock_gettime(2),   sem_getvalue(3),   sem_post(3),    sem_overview(7),
       time(7)

COLOPHON
       This  page  is  part of release 3.53 of the Linux man-pages project.  A
       description of the project, and information about reporting  bugs,  can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2012-05-13			   SEM_WAIT(3)
[top]

List of man pages available for OpenSuSE

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net