GIT-CONFIG(1)GIT-CONFIG(1)NAMEgit-config - Get and set repository or global options
SYNOPSIS
git config [<file-option>] [type] [-z|--null] name [value [value_regex]]
git config [<file-option>] [type] --add name value
git config [<file-option>] [type] --replace-all name value [value_regex]
git config [<file-option>] [type] [-z|--null] --get name [value_regex]
git config [<file-option>] [type] [-z|--null] --get-all name [value_regex]
git config [<file-option>] [type] [-z|--null] --get-regexp name_regex [value_regex]
git config [<file-option>] --unset name [value_regex]
git config [<file-option>] --unset-all name [value_regex]
git config [<file-option>] --rename-section old_name new_name
git config [<file-option>] --remove-section name
git config [<file-option>] [-z|--null] -l | --list
git config [<file-option>] --get-color name [default]
git config [<file-option>] --get-colorbool name [stdout-is-tty]
git config [<file-option>] -e | --edit
DESCRIPTION
You can query/set/replace/unset options with this command. The name is
actually the section and the key separated by a dot, and the value will
be escaped.
Multiple lines can be added to an option by using the --add option. If
you want to update or unset an option which can occur on multiple
lines, a POSIX regexp value_regex needs to be given. Only the existing
values that match the regexp are updated or unset. If you want to han-
dle the lines that do not match the regex, just prepend a single excla-
mation mark in front (see also [xref to refsect1]).
The type specifier can be either --int or --bool, to make git config
ensure that the variable(s) are of the given type and convert the value
to the canonical form (simple decimal number for int, a "true" or
"false" string for bool), or --path, which does some path expansion
(see --path below). If no type specifier is passed, no checks or trans-
formations are performed on the value.
The file-option can be one of --system, --global or --file which spec-
ify where the values will be read from or written to. The default is to
assume the config file of the current repository, .git/config unless
defined otherwise with GIT_DIR and GIT_CONFIG (see [xref to refsect1]).
This command will fail if:
1. The config file is invalid,
2. Can not write to the config file,
1
GIT-CONFIG(1)GIT-CONFIG(1)
3. no section was provided,
4. the section or key is invalid,
5. you try to unset an option which does not exist,
6. you try to unset/set an option for which multiple lines match, or
7. you use --global option without $HOME being properly set.
OPTIONS--replace-all
Default behavior is to replace at most one line. This replaces
all lines matching the key (and optionally the value_regex).
--add Adds a new line to the option without altering any existing val-
ues. This is the same as providing ^$ as the value_regex in
--replace-all.
--get Get the value for a given key (optionally filtered by a regex
matching the value). Returns error code 1 if the key was not
found and error code 2 if multiple key values were found.
--get-all
Like get, but does not fail if the number of values for the key
is not exactly one.
--get-regexp
Like --get-all, but interprets the name as a regular expression.
Also outputs the key names.
--global
For writing options: write to global ~/.gitconfig file rather
than the repository .git/config.
For reading options: read only from global ~/.gitconfig rather
than from all available files.
See also [xref to refsect1].
--system
For writing options: write to system-wide $(prefix)/etc/gitcon-
fig rather than the repository .git/config.
For reading options: read only from system-wide $(pre-
fix)/etc/gitconfig rather than from all available files.
2
GIT-CONFIG(1)GIT-CONFIG(1)
See also [xref to refsect1].
-f config-file, --file config-file
Use the given config file instead of the one specified by
GIT_CONFIG.
--remove-section
Remove the given section from the configuration file.
--rename-section
Rename the given section to a new name.
--unset
Remove the line matching the key from config file.
--unset-all
Remove all lines matching the key from config file.
-l, --list
List all variables set in config file.
--bool git config will ensure that the output is "true" or "false"
--int git config will ensure that the output is a simple decimal num-
ber. An optional value suffix of k, m, or g in the config file
will cause the value to be multiplied by 1024, 1048576, or
1073741824 prior to output.
--bool-or-int
git config will ensure that the output matches the format of
either --bool or --int, as described above.
--pathgit-config will expand leading ~ to the value of $HOME, and
~user to the home directory for the specified user. This option
has no effect when setting the value (but you can use git config
bla ~/ from the command line to let your shell do the expan-
sion).
-z, --null
For all options that output values and/or keys, always end val-
ues with the null character (instead of a newline). Use newline
instead as a delimiter between key and value. This allows for
secure parsing of the output without getting confused e.g. by
3
GIT-CONFIG(1)GIT-CONFIG(1)
values that contain line breaks.
--get-colorbool name [stdout-is-tty]
Find the color setting for name (e.g. color.diff) and output
"true" or "false". stdout-is-tty should be either "true" or
"false", and is taken into account when configuration says
"auto". If stdout-is-tty is missing, then checks the standard
output of the command itself, and exits with status 0 if color
is to be used, or exits with status 1 otherwise. When the color
setting for name is undefined, the command uses color.ui as
fallback.
--get-color name [default]
Find the color configured for name (e.g. color.diff.new) and
output it as the ANSI color escape sequence to the standard out-
put. The optional default parameter is used instead, if there is
no color configured for name.
-e, --edit
Opens an editor to modify the specified config file; either
--system, --global, or repository (default).
FILES
If not set explicitly with --file, there are three files where git con-
fig will search for configuration options:
$GIT_DIR/config
Repository specific configuration file. (The filename is of
course relative to the repository root, not the working direc-
tory.)
~/.gitconfig
User-specific configuration file. Also called "global" configu-
ration file.
$(prefix)/etc/gitconfig
System-wide configuration file.
If no further options are given, all reading options will read
all of these files that are available. If the global or the sys-
tem-wide configuration file are not available they will be
ignored. If the repository configuration file is not available
or readable, git config will exit with a non-zero error code.
However, in neither case will an error message be issued.
4
GIT-CONFIG(1)GIT-CONFIG(1)
All writing options will per default write to the repository
specific configuration file. Note that this also affects options
like --replace-all and --unset. git config will only ever change
one file at a time.
You can override these rules either by command line options or
by environment variables. The --global and the --system options
will limit the file used to the global or system-wide file
respectively. The GIT_CONFIG environment variable has a similar
effect, but you can specify any filename you want.
ENVIRONMENT
GIT_CONFIG
Take the configuration from the given file instead of .git/con-
fig. Using the "--global" option forces this to ~/.gitconfig.
Using the "--system" option forces this to $(prefix)/etc/gitcon-
fig.
See also [xref to refsect1].
EXAMPLES
Given a .git/config like this:
#
# This is the config file, and
# a '#' or ';' character indicates
# a comment
#
; core variables
[core]
; Don't trust file modes
filemode = false
; Our diff algorithm
[diff]
external = /usr/local/bin/diff-wrapper
renames = true
; Proxy settings
[core]
gitproxy="proxy-command" for kernel.org
gitproxy=default-proxy ; for all the rest
you can set the filemode to true with
.ft C
5
GIT-CONFIG(1)GIT-CONFIG(1)
% git config core.filemode true
.ft
The hypothetical proxy command entries actually have a postfix to dis-
cern what URL they apply to. Here is how to change the entry for ker-
nel.org to "ssh".
.ft C
% git config core.gitproxy '"ssh" for kernel.org' 'for kernel.org$'
.ft
This makes sure that only the key/value pair for kernel.org is
replaced.
To delete the entry for renames, do
.ft C
% git config --unset diff.renames
.ft
If you want to delete an entry for a multivar (like core.gitproxy
above), you have to provide a regex matching the value of exactly one
line.
To query the value for a given key, do
.ft C
% git config --get core.filemode
.ft
or
6
GIT-CONFIG(1)GIT-CONFIG(1)
.ft C
% git config core.filemode
.ft
or, to query a multivar:
.ft C
% git config --get core.gitproxy "for kernel.org$"
.ft
If you want to know all the values for a multivar, do:
.ft C
% git config --get-all core.gitproxy
.ft
If you like to live dangerously, you can replace all core.gitproxy by a
new one with
.ft C
% git config --replace-all core.gitproxy ssh
.ft
However, if you really only want to replace the line for the default
proxy, i.e. the one without a "for ..." postfix, do something like
this:
.ft C
% git config core.gitproxy ssh '! for '
.ft
7
GIT-CONFIG(1)GIT-CONFIG(1)
To actually match only values with an exclamation mark, you have to
.ft C
% git config section.key value '[!]'
.ft
To add a new proxy, without altering any of the existing ones, use
.ft C
% git config core.gitproxy '"proxy-command" for example.com'
.ft
An example to use customized color from the configuration in your
script:
.ft C
#!/bin/sh
WS=$(git config --get-color color.diff.whitespace "blue reverse")
RESET=$(git config --get-color "" "reset")
echo "${WS}your whitespace color or blue reverse${RESET}"
.ft
CONFIGURATION FILE
The git configuration file contains a number of variables that affect
the git command’s behavior. The .git/config file in each reposi-
tory is used to store the configuration for that repository, and
$HOME/.gitconfig is used to store a per-user configuration as fallback
values for the .git/config file. The file /etc/gitconfig can be used to
store a system-wide default configuration.
The configuration variables are used by both the git plumbing and the
porcelains. The variables are divided into sections, wherein the fully
qualified variable name of the variable itself is the last dot-sepa-
rated segment and the section name is everything before the last dot.
The variable names are case-insensitive and only alphanumeric charac-
ters are allowed. Some variables may appear multiple times.
8
GIT-CONFIG(1)GIT-CONFIG(1)
Syntax
The syntax is fairly flexible and permissive; whitespaces are mostly
ignored. The # and ; characters begin comments to the end of line,
blank lines are ignored.
The file consists of sections and variables. A section begins with the
name of the section in square brackets and continues until the next
section begins. Section names are not case sensitive. Only alphanumeric
characters, - and . are allowed in section names. Each variable must
belong to some section, which means that there must be a section header
before the first setting of a variable.
Sections can be further divided into subsections. To begin a subsection
put its name in double quotes, separated by space from the section
name, in the section header, like in the example below:
.ft C
[section "subsection"]
.ft
Subsection names are case sensitive and can contain any characters
except newline (doublequote " and backslash have to be escaped as \"
and \\, respectively). Section headers cannot span multiple lines.
Variables may belong directly to a section or to a given subsection.
You can have [section] if you have [section "subsection"], but you
don’t need to.
There is also a case insensitive alternative [section.subsection] syn-
tax. In this syntax, subsection names follow the same restrictions as
for section names.
All the other lines (and the remainder of the line after the section
header) are recognized as setting variables, in the form name = value.
If there is no equal sign on the line, the entire line is taken as name
and the variable is recognized as boolean "true". The variable names
are case-insensitive and only alphanumeric characters and - are
allowed. There can be more than one value for a given variable; we say
then that variable is multivalued.
Leading and trailing whitespace in a variable value is discarded.
Internal whitespace within a variable value is retained verbatim.
The values following the equals sign in variable assign are all either
9
GIT-CONFIG(1)GIT-CONFIG(1)
a string, an integer, or a boolean. Boolean values may be given as
yes/no, 0/1, true/false or on/off. Case is not significant in boolean
values, when converting value to the canonical form using --bool type
specifier; git config will ensure that the output is "true" or "false".
String values may be entirely or partially enclosed in double quotes.
You need to enclose variable values in double quotes if you want to
preserve leading or trailing whitespace, or if the variable value con-
tains comment characters (i.e. it contains # or ;). Double quote " and
backslash \ characters in variable values must be escaped: use \" for "
and \\ for \.
The following escape sequences (beside \" and \\) are recognized: \n
for newline character (NL), \t for horizontal tabulation (HT, TAB) and
\b for backspace (BS). No other char escape sequence, nor octal char
sequences are valid.
Variable values ending in a \ are continued on the next line in the
customary UNIX fashion.
Some variables may require a special value format.
Example
# Core variables
[core]
; Don't trust file modes
filemode = false
# Our diff algorithm
[diff]
external = /usr/local/bin/diff-wrapper
renames = true
[branch "devel"]
remote = origin
merge = refs/heads/devel
# Proxy settings
[core]
gitProxy="ssh" for "kernel.org"
gitProxy=default-proxy ; for the rest
Variables
Note that this list is non-comprehensive and not necessarily complete.
For command-specific variables, you will find a more detailed descrip-
tion in the appropriate manual page. You will find a description of
non-core porcelain configuration variables in the respective porcelain
documentation.
10
GIT-CONFIG(1)GIT-CONFIG(1)
advice.*
When set to true, display the given optional help message. When
set to false, do not display. The configuration variables are:
pushNonFastForward
Advice shown when git-push(1) refuses non-fast-forward
refs. Default: true.
statusHints
Directions on how to stage/unstage/add shown in the out-
put of git-status(1) and the template shown when writing
commit messages. Default: true.
commitBeforeMerge
Advice shown when git-merge(1) refuses to merge to avoid
overwriting local changes. Default: true.
resolveConflict
Advices shown by various commands when conflicts prevent
the operation from being performed. Default: true.
implicitIdentity
Advice on how to set your identity configuration when
your information is guessed from the system username and
domain name. Default: true.
detachedHead
Advice shown when you used :git-checkout(1) to move to
the detach HEAD state, to instruct how to create a local
branch after the fact. Default: true.
core.fileMode
If false, the executable bit differences between the index and
the working copy are ignored; useful on broken filesystems like
FAT. See git-update-index(1).
The default is true, except git-clone(1) or git-init(1) will
probe and set core.fileMode false if appropriate when the repos-
itory is created.
core.ignoreCygwinFSTricks
This option is only used by Cygwin implementation of Git. If
false, the Cygwin stat() and lstat() functions are used. This
11
GIT-CONFIG(1)GIT-CONFIG(1)
may be useful if your repository consists of a few separate
directories joined in one hierarchy using Cygwin mount. If true,
Git uses native Win32 API whenever it is possible and falls back
to Cygwin functions only to handle symbol links. The native mode
is more than twice faster than normal Cygwin l/stat() functions.
True by default, unless core.filemode is true, in which case
ignoreCygwinFSTricks is ignored as Cygwin’s POSIX emula-
tion is required to support core.filemode.
core.ignorecase
If true, this option enables various workarounds to enable git
to work better on filesystems that are not case sensitive, like
FAT. For example, if a directory listing finds "makefile" when
git expects "Makefile", git will assume it is really the same
file, and continue to remember it as "Makefile".
The default is false, except git-clone(1) or git-init(1) will
probe and set core.ignorecase true if appropriate when the
repository is created.
core.trustctime
If false, the ctime differences between the index and the work-
ing copy are ignored; useful when the inode change time is regu-
larly modified by something outside Git (file system crawlers
and some backup systems). See git-update-index(1). True by
default.
core.quotepath
The commands that output paths (e.g. ls-files, diff), when not
given the -z option, will quote "unusual" characters in the
pathname by enclosing the pathname in a double-quote pair and
with backslashes the same way strings in C source code are
quoted. If this variable is set to false, the bytes higher than
0x80 are not quoted but output as verbatim. Note that double
quote, backslash and control characters are always quoted with-
out -z regardless of the setting of this variable.
core.eol
Sets the line ending type to use in the working directory for
files that have the text property set. Alternatives are lf, crlf
and native, which uses the platform’s native line ending.
The default value is native. See gitattributes(5) for more
information on end-of-line conversion.
core.safecrlf
If true, makes git check if converting CRLF is reversible when
end-of-line conversion is active. Git will verify if a command
modifies a file in the work tree either directly or indirectly.
For example, committing a file followed by checking out the same
12
GIT-CONFIG(1)GIT-CONFIG(1)
file should yield the original file in the work tree. If this is
not the case for the current setting of core.autocrlf, git will
reject the file. The variable can be set to "warn", in which
case git will only warn about an irreversible conversion but
continue the operation.
CRLF conversion bears a slight chance of corrupting data. When
it is enabled, git will convert CRLF to LF during commit and LF
to CRLF during checkout. A file that contains a mixture of LF
and CRLF before the commit cannot be recreated by git. For text
files this is the right thing to do: it corrects line endings
such that we have only LF line endings in the repository. But
for binary files that are accidentally classified as text the
conversion can corrupt data.
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
git that this file is binary and git will handle the file appro-
priately.
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary
files cannot be distinguished. In both cases CRLFs are removed
in an irreversible way. For text files this is the right thing
to do because CRLFs are line endings, while for binary files
converting CRLFs corrupts data.
Note, this safety check does not mean that a checkout will gen-
erate a file identical to the original file for a different set-
ting of core.eol and core.autocrlf, but only for the current
one. For example, a text file with LF would be accepted with
core.eol=lf and could later be checked out with core.eol=crlf,
in which case the resulting file would contain CRLF, although
the original file contained LF. However, in both work trees the
line endings would be consistent, that is either all LF or all
CRLF, but never mixed. A file with mixed line endings would be
reported by the core.safecrlf mechanism.
core.autocrlf
Setting this variable to "true" is almost the same as setting
the text attribute to "auto" on all files except that text files
are not guaranteed to be normalized: files that contain CRLF in
the repository will not be touched. Use this setting if you want
to have CRLF line endings in your working directory even though
the repository does not have normalized line endings. This vari-
able can be set to input, in which case no output conversion is
performed.
core.symlinks
If false, symbolic links are checked out as small plain files
13
GIT-CONFIG(1)GIT-CONFIG(1)
that contain the link text. git-update-index(1) and git-add(1)
will not change the recorded type to regular file. Useful on
filesystems like FAT that do not support symbolic links.
The default is true, except git-clone(1) or git-init(1) will
probe and set core.symlinks false if appropriate when the repos-
itory is created.
core.gitProxy
A "proxy command" to execute (as command host port) instead of
establishing direct connection to the remote server when using
the git protocol for fetching. If the variable value is in the
"COMMAND for DOMAIN" format, the command is applied only on
hostnames ending with the specified domain string. This variable
may be set multiple times and is matched in the given order; the
first match wins.
Can be overridden by the GIT_PROXY_COMMAND environment variable
(which always applies universally, without the special "for"
handling).
The special string none can be used as the proxy command to
specify that no proxy be used for a given domain pattern. This
is useful for excluding servers inside a firewall from proxy
use, while defaulting to a common proxy for external domains.
core.ignoreStat
If true, commands which modify both the working tree and the
index will mark the updated paths with the "assume unchanged"
bit in the index. These marked files are then assumed to stay
unchanged in the working copy, until you mark them otherwise
manually - Git will not detect the file changes by lstat()
calls. This is useful on systems where those are very slow, such
as Microsoft Windows. See git-update-index(1). False by default.
core.preferSymlinkRefs
Instead of the default "symref" format for HEAD and other sym-
bolic reference files, use symbolic links. This is sometimes
needed to work with old scripts that expect HEAD to be a sym-
bolic link.
core.bare
If true this repository is assumed to be bare and has no working
directory associated with it. If this is the case a number of
commands that require a working directory will be disabled, such
as git-add(1) or git-merge(1).
This setting is automatically guessed by git-clone(1) or
git-init(1) when the repository was created. By default a repos-
itory that ends in "/.git" is assumed to be not bare (bare =
14
GIT-CONFIG(1)GIT-CONFIG(1)
false), while all other repositories are assumed to be bare
(bare = true).
core.worktree
Set the path to the root of the work tree. This can be overrid-
den by the GIT_WORK_TREE environment variable and the
--work-tree command line option. It can be an absolute path or a
relative path to the .git directory, either specified by
--git-dir or GIT_DIR, or automatically discovered. If --git-dir
or GIT_DIR are specified but none of --work-tree, GIT_WORK_TREE
and core.worktree is specified, the current working directory is
regarded as the root of the work tree.
Note that this variable is honored even when set in a configura-
tion file in a ".git" subdirectory of a directory, and its value
differs from the latter directory (e.g. "/path/to/.git/config"
has core.worktree set to "/different/path"), which is most
likely a misconfiguration. Running git commands in "/path/to"
directory will still use "/different/path" as the root of the
work tree and can cause great confusion to the users.
core.logAllRefUpdates
Enable the reflog. Updates to a ref <ref> is logged to the file
"$GIT_DIR/logs/<ref>", by appending the new and old SHA1, the
date/time and the reason of the update, but only when the file
exists. If this configuration variable is set to true, missing
"$GIT_DIR/logs/<ref>" file is automatically created for branch
heads.
This information can be used to determine what commit was the
tip of a branch "2 days ago".
This value is true by default in a repository that has a working
directory associated with it, and false by default in a bare
repository.
core.repositoryFormatVersion
Internal variable identifying the repository format and layout
version.
core.sharedRepository
When group (or true), the repository is made shareable between
several users in a group (making sure all the files and objects
are group-writable). When all (or world or everybody), the
repository will be readable by all users, additionally to being
group-shareable. When umask (or false), git will use permissions
reported by umask(2). When 0xxx, where 0xxx is an octal number,
files in the repository will have this mode value. 0xxx will
override user’s umask value (whereas the other options
will only override requested parts of the user’s umask
15
GIT-CONFIG(1)GIT-CONFIG(1)
value). Examples: 0660 will make the repo read/write-able for
the owner and group, but inaccessible to others (equivalent to
group unless umask is e.g. 0022). 0640 is a repository that is
group-readable but not group-writable. See git-init(1). False by
default.
core.warnAmbiguousRefs
If true, git will warn you if the ref name you passed it is
ambiguous and might match multiple refs in the .git/refs/ tree.
True by default.
core.compression
An integer -1..9, indicating a default compression level. -1 is
the zlib default. 0 means no compression, and 1..9 are various
speed/size tradeoffs, 9 being slowest. If set, this provides a
default to other compression variables, such as core.loosecom-
pression and pack.compression.
core.loosecompression
An integer -1..9, indicating the compression level for objects
that are not in a pack file. -1 is the zlib default. 0 means no
compression, and 1..9 are various speed/size tradeoffs, 9 being
slowest. If not set, defaults to core.compression. If that is
not set, defaults to 1 (best speed).
core.packedGitWindowSize
Number of bytes of a pack file to map into memory in a single
mapping operation. Larger window sizes may allow your system to
process a smaller number of large pack files more quickly.
Smaller window sizes will negatively affect performance due to
increased calls to the operating system’s memory manager,
but may improve performance when accessing a large number of
large pack files.
Default is 1 MiB if NO_MMAP was set at compile time, otherwise
32 MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This
should be reasonable for all users/operating systems. You proba-
bly do not need to adjust this value.
Common unit suffixes of k, m, or g are supported.
core.packedGitLimit
Maximum number of bytes to map simultaneously into memory from
pack files. If Git needs to access more than this many bytes at
once to complete an operation it will unmap existing regions to
reclaim virtual address space within the process.
Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit plat-
forms. This should be reasonable for all users/operating
16
GIT-CONFIG(1)GIT-CONFIG(1)
systems, except on the largest projects. You probably do not
need to adjust this value.
Common unit suffixes of k, m, or g are supported.
core.deltaBaseCacheLimit
Maximum number of bytes to reserve for caching base objects that
may be referenced by multiple deltified objects. By storing the
entire decompressed base objects in a cache Git is able to avoid
unpacking and decompressing frequently used base objects multi-
ple times.
Default is 16 MiB on all platforms. This should be reasonable
for all users/operating systems, except on the largest projects.
You probably do not need to adjust this value.
Common unit suffixes of k, m, or g are supported.
core.bigFileThreshold
Files larger than this size are stored deflated, without
attempting delta compression. Storing large files without delta
compression avoids excessive memory usage, at the slight expense
of increased disk usage.
Default is 512 MiB on all platforms. This should be reasonable
for most projects as source code and other text files can still
be delta compressed, but larger binary media files won’t
be.
Common unit suffixes of k, m, or g are supported.
Currently only git-fast-import(1) honors this setting.
core.excludesfile
In addition to .gitignore (per-directory) and .git/info/exclude,
git looks into this file for patterns of files which are not
meant to be tracked. "~/" is expanded to the value of $HOME and
"~user/" to the specified user’s home directory. See git-
ignore(5).
core.askpass
Some commands (e.g. svn and http interfaces) that interactively
ask for a password can be told to use an external program given
via the value of this variable. Can be overridden by the
GIT_ASKPASS environment variable. If not set, fall back to the
value of the SSH_ASKPASS environment variable or, failing that,
a simple password prompt. The external program shall be given a
suitable prompt as command line argument and write the password
on its STDOUT.
17
GIT-CONFIG(1)GIT-CONFIG(1)
core.editor
Commands such as commit and tag that lets you edit messages by
launching an editor uses the value of this variable when it is
set, and the environment variable GIT_EDITOR is not set. See
git-var(1).
core.pager
The command that git will use to paginate output. Can be over-
ridden with the GIT_PAGER environment variable. Note that git
sets the LESS environment variable to FRSX if it is unset when
it runs the pager. One can change these settings by setting the
LESS variable to some other value. Alternately, these settings
can be overridden on a project or global basis by setting the
core.pager option. Setting core.pager has no affect on the LESS
environment variable behaviour above, so if you want to override
git’s default settings this way, you need to be explicit.
For example, to disable the S option in a backward compatible
manner, set core.pager to less -+$LESS -FRX. This will be passed
to the shell by git, which will translate the final command to
LESS=FRSX less -+FRSX -FRX.
core.whitespace
A comma separated list of common whitespace problems to notice.
git diff will use color.diff.whitespace to highlight them, and
git apply --whitespace=error will consider them as errors. You
can prefix - to disable any of them (e.g. -trailing-space):
o blank-at-eol treats trailing whitespaces at the end of the
line as an error (enabled by default).
o space-before-tab treats a space character that appears imme-
diately before a tab character in the initial indent part of
the line as an error (enabled by default).
o indent-with-non-tab treats a line that is indented with 8 or
more space characters as an error (not enabled by default).
o tab-in-indent treats a tab character in the initial indent
part of the line as an error (not enabled by default).
o blank-at-eof treats blank lines added at the end of file as
an error (enabled by default).
o trailing-space is a short-hand to cover both blank-at-eol
and blank-at-eof.
o cr-at-eol treats a carriage-return at the end of line as
part of the line terminator, i.e. with it, trailing-space
does not trigger if the character before such a car-
riage-return is not a whitespace (not enabled by default).
18
GIT-CONFIG(1)GIT-CONFIG(1)
core.fsyncobjectfiles
This boolean will enable fsync() when writing object files.
This is a total waste of time and effort on a filesystem that
orders data writes properly, but can be useful for filesystems
that do not use journalling (traditional UNIX filesystems) or
that only journal metadata and not file contents (OS X’s
HFS+, or Linux ext3 with "data=writeback").
core.preloadindex
Enable parallel index preload for operations like git diff
This can speed up operations like git diff and git status espe-
cially on filesystems like NFS that have weak caching semantics
and thus relatively high IO latencies. With this set to true,
git will do the index comparison to the filesystem data in par-
allel, allowing overlapping IO’s.
core.createObject
You can set this to link, in which case a hardlink followed by a
delete of the source are used to make sure that object creation
will not overwrite existing objects.
On some file system/operating system combinations, this is unre-
liable. Set this config setting to rename there; However, This
will remove the check that makes sure that existing object files
will not get overwritten.
core.notesRef
When showing commit messages, also show notes which are stored
in the given ref. The ref must be fully qualified. If the given
ref does not exist, it is not an error but means that no notes
should be printed.
This setting defaults to "refs/notes/commits", and it can be
overridden by the GIT_NOTES_REF environment variable. See
git-notes(1).
core.sparseCheckout
Enable "sparse checkout" feature. See section "Sparse checkout"
in git-read-tree(1) for more information.
add.ignore-errors, add.ignoreErrors
Tells git add to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the --ignore-errors
option of git-add(1). Older versions of git accept only
add.ignore-errors, which does not follow the usual naming con-
vention for configuration variables. Newer versions of git honor
add.ignoreErrors as well.
19
GIT-CONFIG(1)GIT-CONFIG(1)
alias.*
Command aliases for the git(1) command wrapper - e.g. after
defining "alias.last = cat-file commit HEAD", the invocation
"git last" is equivalent to "git cat-file commit HEAD". To avoid
confusion and troubles with script usage, aliases that hide
existing git commands are ignored. Arguments are split by
spaces, the usual shell quoting and escaping is supported. quote
pair and a backslash can be used to quote them.
If the alias expansion is prefixed with an exclamation point, it
will be treated as a shell command. For example, defining
"alias.new = !gitk --all --not ORIG_HEAD", the invocation "git
new" is equivalent to running the shell command "gitk --all
--not ORIG_HEAD". Note that shell commands will be executed from
the top-level directory of a repository, which may not necessar-
ily be the current directory.
am.keepcr
If true, git-am will call git-mailsplit for patches in mbox for-
mat with parameter --keep-cr. In this case git-mailsplit will
not remove \r from lines ending with \r\n. Can be overridden by
giving --no-keep-cr from the command line. See git-am(1),
git-mailsplit(1).
apply.ignorewhitespace
When set to change, tells git apply to ignore changes in whites-
pace, in the same way as the --ignore-space-change option. When
set to one of: no, none, never, false tells git apply to respect
all whitespace differences. See git-apply(1).
apply.whitespace
Tells git apply how to handle whitespaces, in the same way as
the --whitespace option. See git-apply(1).
branch.autosetupmerge
Tells git branch and git checkout to set up new branches so that
git-pull(1) will appropriately merge from the starting point
branch. Note that even if this option is not set, this behavior
can be chosen per-branch using the --track and --no-track
options. The valid settings are: false -- no auto-
matic setup is done; true -- automatic setup is done
when the starting point is a remote branch;
always -- automatic setup is done when the starting
point is either a local branch or remote branch. This option
defaults to true.
branch.autosetuprebase
When a new branch is created with git branch or git checkout
that tracks another branch, this variable tells git to set up
20
GIT-CONFIG(1)GIT-CONFIG(1)
pull to rebase instead of merge (see "branch.<name>.rebase").
When never, rebase is never automatically set to true. When
local, rebase is set to true for tracked branches of other local
branches. When remote, rebase is set to true for tracked
branches of remote branches. When always, rebase will be set to
true for all tracking branches. See "branch.autosetupmerge" for
details on how to set up a branch to track another branch. This
option defaults to never.
branch.<name>.remote
When in branch <name>, it tells git fetch and git push which
remote to fetch from/push to. It defaults to origin if no remote
is configured. origin is also used if you are not on any branch.
branch.<name>.merge
Defines, together with branch.<name>.remote, the upstream branch
for the given branch. It tells git fetch/git pull which branch
to merge and can also affect git push (see push.default). When
in branch <name>, it tells git fetch the default refspec to be
marked for merging in FETCH_HEAD. The value is handled like the
remote part of a refspec, and must match a ref which is fetched
from the remote given by "branch.<name>.remote". The merge
information is used by git pull (which at first calls git fetch)
to lookup the default branch for merging. Without this option,
git pull defaults to merge the first refspec fetched. Specify
multiple values to get an octopus merge. If you wish to setup
git pull so that it merges into <name> from another branch in
the local repository, you can point branch.<name>.merge to the
desired branch, and use the special setting . (a period) for
branch.<name>.remote.
branch.<name>.mergeoptions
Sets default options for merging into branch <name>. The syntax
and supported options are the same as those of git-merge(1), but
option values containing whitespace characters are currently not
supported.
branch.<name>.rebase
When true, rebase the branch <name> on top of the fetched
branch, instead of merging the default branch from the default
remote when "git pull" is run. NOTE: this is a possibly danger-
ous operation; do not use it unless you understand the implica-
tions (see git-rebase(1) for details).
browser.<tool>.cmd
Specify the command to invoke the specified browser. The speci-
fied command is evaluated in shell with the URLs passed as argu-
ments. (See git-web--browse(1).)
21
GIT-CONFIG(1)GIT-CONFIG(1)
browser.<tool>.path
Override the path for the given tool that may be used to browse
HTML help (see -w option in git-help(1)) or a working repository
in gitweb (see git-instaweb(1)).
clean.requireForce
A boolean to make git-clean do nothing unless given -f or -n.
Defaults to true.
color.branch
A boolean to enable/disable color in the output of
git-branch(1). May be set to always, false (or never) or auto
(or true), in which case colors are used only when the output is
to a terminal. Defaults to false.
color.branch.<slot>
Use customized color for branch coloration. <slot> is one of
current (the current branch), local (a local branch), remote (a
tracking branch in refs/remotes/), plain (other refs).
The value for these configuration variables is a list of colors
(at most two) and attributes (at most one), separated by spaces.
The colors accepted are normal, black, red, green, yellow, blue,
magenta, cyan and white; the attributes are bold, dim, ul, blink
and reverse. The first color given is the foreground; the second
is the background. The position of the attribute, if any,
doesn’t matter.
color.diff
When set to always, always use colors in patch. When false (or
never), never. When set to true or auto, use colors only when
the output is to the terminal. Defaults to false.
color.diff.<slot>
Use customized color for diff colorization. <slot> specifies
which part of the patch to use the specified color, and is one
of plain (context text), meta (metainformation), frag (hunk
header), func (function in hunk header), old (removed lines),
new (added lines), commit (commit headers), or whitespace (high-
lighting whitespace errors). The values of these variables may
be specified as in color.branch.<slot>.
color.decorate.<slot>
Use customized color for git log --decorate output. <slot> is
one of branch, remoteBranch, tag, stash or HEAD for local
branches, remote tracking branches, tags, stash and HEAD,
respectively.
22
GIT-CONFIG(1)GIT-CONFIG(1)
color.grep
When set to always, always highlight matches. When false (or
never), never. When set to true or auto, use color only when the
output is written to the terminal. Defaults to false.
color.grep.<slot>
Use customized color for grep colorization. <slot> specifies
which part of the line to use the specified color, and is one of
context
non-matching text in context lines (when using -A, -B, or
-C)
filename
filename prefix (when not using -h)
function
function name lines (when using -p)
linenumber
line number prefix (when using -n)
match matching text
selected
non-matching text in selected lines
separator
separators between fields on a line (:, -, and =) and
between hunks (--)
The values of these variables may be specified as in
color.branch.<slot>.
color.interactive
When set to always, always use colors for interactive prompts
and displays (such as those used by "git-add --interactive").
When false (or never), never. When set to true or auto, use col-
ors only when the output is to the terminal. Defaults to false.
23
GIT-CONFIG(1)GIT-CONFIG(1)
color.interactive.<slot>
Use customized color for git add --interactive output. <slot>
may be prompt, header, help or error, for four distinct types of
normal output from interactive commands. The values of these
variables may be specified as in color.branch.<slot>.
color.pager
A boolean to enable/disable colored output when the pager is in
use (default is true).
color.showbranch
A boolean to enable/disable color in the output of
git-show-branch(1). May be set to always, false (or never) or
auto (or true), in which case colors are used only when the out-
put is to a terminal. Defaults to false.
color.status
A boolean to enable/disable color in the output of git-sta-
tus(1). May be set to always, false (or never) or auto (or
true), in which case colors are used only when the output is to
a terminal. Defaults to false.
color.status.<slot>
Use customized color for status colorization. <slot> is one of
header (the header text of the status message), added or updated
(files which are added but not committed), changed (files which
are changed but not added in the index), untracked (files which
are not tracked by git), or nobranch (the color the no branch
warning is shown in, defaulting to red). The values of these
variables may be specified as in color.branch.<slot>.
color.ui
When set to always, always use colors in all git commands which
are capable of colored output. When false (or never), never.
When set to true or auto, use colors only when the output is to
the terminal. When more specific variables of color.* are set,
they always take precedence over this setting. Defaults to
false.
commit.status
A boolean to enable/disable inclusion of status information in
the commit message template when using an editor to prepare the
commit message. Defaults to true.
commit.template
Specify a file to use as the template for new commit messages.
"~/" is expanded to the value of $HOME and "~user/" to the
24
GIT-CONFIG(1)GIT-CONFIG(1)
specified user’s home directory.
diff.autorefreshindex
When using git diff to compare with work tree files, do not con-
sider stat-only change as changed. Instead, silently run git
update-index --refresh to update the cached stat information for
paths whose contents in the work tree match the contents in the
index. This option defaults to true. Note that this affects only
git diff Porcelain, and not lower level diff commands such as
git diff-files.
diff.external
If this config variable is set, diff generation is not performed
using the internal diff machinery, but using the given command.
Can be overridden with the ‘GIT_EXTERNAL_DIFF’ envi-
ronment variable. The command is called with parameters as
described under "git Diffs" in git(1). Note: if you want to use
an external diff program only on a subset of your files, you
might want to use gitattributes(5) instead.
diff.mnemonicprefix
If set, git diff uses a prefix pair that is different from the
standard "a/" and "b/" depending on what is being compared. When
this configuration is in effect, reverse diff output also swaps
the order of the prefixes:
git diff
compares the (i)ndex and the (w)ork tree;
git diff HEAD
compares a (c)ommit and the (w)ork tree;
git diff --cached
compares a (c)ommit and the (i)ndex;
git diff HEAD:file1 file2
compares an (o)bject and a (w)ork tree entity;
git diff --no-index a b
compares two non-git things (1) and (2).
25
GIT-CONFIG(1)GIT-CONFIG(1)
diff.noprefix
If set, git diff does not show any source or destination prefix.
diff.renameLimit
The number of files to consider when performing the copy/rename
detection; equivalent to the git diff option -l.
diff.renames
Tells git to detect renames. If set to any boolean value, it
will enable basic rename detection. If set to "copies" or
"copy", it will detect copies, as well.
diff.ignoreSubmodules
Sets the default value of --ignore-submodules. Note that this
affects only git diff Porcelain, and not lower level diff com-
mands such as git diff-files. git checkout also honors this set-
ting when reporting uncommitted changes.
diff.suppressBlankEmpty
A boolean to inhibit the standard behavior of printing a space
before each empty output line. Defaults to false.
diff.tool
Controls which diff tool is used. diff.tool overrides merge.tool
when used by git-difftool(1) and has the same valid values as
merge.tool minus "tortoisemerge" and plus "kompare".
difftool.<tool>.path
Override the path for the given tool. This is useful in case
your tool is not in the PATH.
difftool.<tool>.cmd
Specify the command to invoke the specified diff tool. The spec-
ified command is evaluated in shell with the following variables
available: LOCAL is set to the name of the temporary file con-
taining the contents of the diff pre-image and REMOTE is set to
the name of the temporary file containing the contents of the
diff post-image.
difftool.prompt
Prompt before each invocation of the diff tool.
diff.wordRegex
A POSIX Extended Regular Expression used to determine what is a
"word" when performing word-by-word difference calculations.
26
GIT-CONFIG(1)GIT-CONFIG(1)
Character sequences that match the regular expression are
"words", all other characters are ignorable whitespace.
fetch.unpackLimit
If the number of objects fetched over the git native transfer is
below this limit, then the objects will be unpacked into loose
object files. However if the number of received objects equals
or exceeds this limit then the received pack will be stored as a
pack, after adding any missing delta bases. Storing the pack
from a push can make the push operation complete faster, espe-
cially on slow filesystems. If not set, the value of trans-
fer.unpackLimit is used instead.
format.attach
Enable multipart/mixed attachments as the default for for-
mat-patch. The value can also be a double quoted string which
will enable attachments as the default and set the value as the
boundary. See the --attach option in git-format-patch(1).
format.numbered
A boolean which can enable or disable sequence numbers in patch
subjects. It defaults to "auto" which enables it only if there
is more than one patch. It can be enabled or disabled for all
messages by setting it to "true" or "false". See --numbered
option in git-format-patch(1).
format.headers
Additional email headers to include in a patch to be submitted
by mail. See git-format-patch(1).
format.to, format.cc
Additional recipients to include in a patch to be submitted by
mail. See the --to and --cc options in git-format-patch(1).
format.subjectprefix
The default for format-patch is to output files with the [PATCH]
subject prefix. Use this variable to change that prefix.
format.signature
The default for format-patch is to output a signature containing
the git version number. Use this variable to change that
default. Set this variable to the empty string ("") to suppress
signature generation.
format.suffix
The default for format-patch is to output files with the suffix
27
GIT-CONFIG(1)GIT-CONFIG(1)
.patch. Use this variable to change that suffix (make sure to
include the dot if you want it).
format.pretty
The default pretty format for log/show/whatchanged command, See
git-log(1), git-show(1), git-whatchanged(1).
format.thread
The default threading style for git format-patch. Can be a
boolean value, or shallow or deep. shallow threading makes every
mail a reply to the head of the series, where the head is chosen
from the cover letter, the \--in-reply-to, and the first patch
mail, in this order. deep threading makes every mail a reply to
the previous one. A true boolean value is the same as shallow,
and a false value disables threading.
format.signoff
A boolean value which lets you enable the -s/--signoff option of
format-patch by default. Note: Adding the Signed-off-by: line to
a patch should be a conscious act and means that you certify you
have the rights to submit this work under the same open source
license. Please see the SubmittingPatches document for further
discussion.
gc.aggressiveWindow
The window size parameter used in the delta compression algo-
rithm used by git gc --aggressive. This defaults to 250.
gc.auto
When there are approximately more than this many loose objects
in the repository, git gc --auto will pack them. Some Porcelain
commands use this command to perform a light-weight garbage col-
lection from time to time. The default value is 6700. Setting
this to 0 disables it.
gc.autopacklimit
When there are more than this many packs that are not marked
with *.keep file in the repository, git gc --auto consolidates
them into one larger pack. The default value is 50. Setting this
to 0 disables it.
gc.packrefs
Running git pack-refs in a repository renders it unclonable by
Git versions prior to 1.5.1.2 over dumb transports such as HTTP.
This variable determines whether git gc runs git pack-refs. This
can be set to notbare to enable it within all non-bare repos or
it can be set to a boolean value. The default is true.
28
GIT-CONFIG(1)GIT-CONFIG(1)
gc.pruneexpire
When git gc is run, it will call prune --expire 2.weeks.ago.
Override the grace period with this config variable. The value
"now" may be used to disable this grace period and always prune
unreachable objects immediately.
gc.reflogexpire, gc.<pattern>.reflogexpire
git reflog expire removes reflog entries older than this time;
defaults to 90 days. With "<pattern>" (e.g. "refs/stash") in the
middle the setting applies only to the refs that match the <pat-
tern>.
gc.reflogexpireunreachable, gc.<ref>.reflogexpireunreachable
git reflog expire removes reflog entries older than this time
and are not reachable from the current tip; defaults to 30 days.
With "<pattern>" (e.g. "refs/stash") in the middle, the setting
applies only to the refs that match the <pattern>.
gc.rerereresolved
Records of conflicted merge you resolved earlier are kept for
this many days when git rerere gc is run. The default is 60
days. See git-rerere(1).
gc.rerereunresolved
Records of conflicted merge you have not resolved are kept for
this many days when git rerere gc is run. The default is 15
days. See git-rerere(1).
gitcvs.commitmsgannotation
Append this string to each commit message. Set to empty string
to disable this feature. Defaults to "via git-CVS emulator".
gitcvs.enabled
Whether the CVS server interface is enabled for this repository.
See git-cvsserver(1).
gitcvs.logfile
Path to a log file where the CVS server interface well... logs
various stuff. See git-cvsserver(1).
gitcvs.usecrlfattr
If true, the server will look up the end-of-line conversion
attributes for files to determine the -k modes to use. If the
attributes force git to treat a file as text, the -k mode will
be left blank so CVS clients will treat it as text. If they sup-
press text conversion, the file will be set with -kb mode, which
29
GIT-CONFIG(1)GIT-CONFIG(1)
suppresses any newline munging the client might otherwise do. If
the attributes do not allow the file type to be determined, then
gitcvs.allbinary is used. See gitattributes(5).
gitcvs.allbinary
This is used if gitcvs.usecrlfattr does not resolve the correct
-kb mode to use. If true, all unresolved files are sent to the
client in mode -kb. This causes the client to treat them as
binary files, which suppresses any newline munging it otherwise
might do. Alternatively, if it is set to "guess", then the con-
tents of the file are examined to decide if it is binary, simi-
lar to core.autocrlf.
gitcvs.dbname
Database used by git-cvsserver to cache revision information
derived from the git repository. The exact meaning depends on
the used database driver, for SQLite (which is the default
driver) this is a filename. Supports variable substitution (see
git-cvsserver(1) for details). May not contain semicolons (;).
Default: %Ggitcvs.%m.sqlite
gitcvs.dbdriver
Used Perl DBI driver. You can specify any available driver for
this here, but it might not work. git-cvsserver is tested with
DBD::SQLite, reported to work with DBD::Pg, and reported not to
work with DBD::mysql. Experimental feature. May not contain dou-
ble colons (:). Default: SQLite. See git-cvsserver(1).
gitcvs.dbuser, gitcvs.dbpass
Database user and password. Only useful if setting
gitcvs.dbdriver, since SQLite has no concept of database users
and/or passwords. gitcvs.dbuser supports variable substitution
(see git-cvsserver(1) for details).
gitcvs.dbTableNamePrefix
Database table name prefix. Prepended to the names of any
database tables used, allowing a single database to be used for
several repositories. Supports variable substitution (see
git-cvsserver(1) for details). Any non-alphabetic characters
will be replaced with underscores.
All gitcvs variables except for gitcvs.usecrlfattr and
gitcvs.allbinary can also be specified as
gitcvs.<access_method>.<varname> (where access_method is one of
"ext" and "pserver") to make them apply only for the given
access method.
30
GIT-CONFIG(1)GIT-CONFIG(1)
gui.commitmsgwidth
Defines how wide the commit message window is in the git-gui(1).
"75" is the default.
gui.diffcontext
Specifies how many context lines should be used in calls to diff
made by the git-gui(1). The default is "5".
gui.encoding
Specifies the default encoding to use for displaying of file
contents in git-gui(1) and gitk(1). It can be overridden by set-
ting the encoding attribute for relevant files (see gitat-
tributes(5)). If this option is not set, the tools default to
the locale encoding.
gui.matchtrackingbranch
Determines if new branches created with git-gui(1) should
default to tracking remote branches with matching names or not.
Default: "false".
gui.newbranchtemplate
Is used as suggested name when creating new branches using the
git-gui(1).
gui.pruneduringfetch
"true" if git-gui(1) should prune tracking branches when per-
forming a fetch. The default value is "false".
gui.trustmtime
Determines if git-gui(1) should trust the file modification
timestamp or not. By default the timestamps are not trusted.
gui.spellingdictionary
Specifies the dictionary used for spell checking commit messages
in the git-gui(1). When set to "none" spell checking is turned
off.
gui.fastcopyblame
If true, git gui blame uses -C instead of -C -C for original
location detection. It makes blame significantly faster on huge
repositories at the expense of less thorough copy detection.
gui.copyblamethreshold
Specifies the threshold to use in git gui blame original loca-
tion detection, measured in alphanumeric characters. See the
31
GIT-CONFIG(1)GIT-CONFIG(1)git-blame(1) manual for more information on copy detection.
gui.blamehistoryctx
Specifies the radius of history context in days to show in
gitk(1) for the selected commit, when the Show History Context
menu item is invoked from git gui blame. If this variable is set
to zero, the whole history is shown.
guitool.<name>.cmd
Specifies the shell command line to execute when the correspond-
ing item of the git-gui(1) Tools menu is invoked. This option
is mandatory for every tool. The command is executed from the
root of the working directory, and in the environment it
receives the name of the tool as GIT_GUITOOL, the name of the
currently selected file as FILENAME, and the name of the current
branch as CUR_BRANCH (if the head is detached, CUR_BRANCH is
empty).
guitool.<name>.needsfile
Run the tool only if a diff is selected in the GUI. It guaran-
tees that FILENAME is not empty.
guitool.<name>.noconsole
Run the command silently, without creating a window to display
its output.
guitool.<name>.norescan
Don’t rescan the working directory for changes after the
tool finishes execution.
guitool.<name>.confirm
Show a confirmation dialog before actually running the tool.
guitool.<name>.argprompt
Request a string argument from the user, and pass it to the tool
through the ARGS environment variable. Since requesting an argu-
ment implies confirmation, the confirm option has no effect if
this is enabled. If the option is set to true, yes, or 1, the
dialog uses a built-in generic prompt; otherwise the exact value
of the variable is used.
guitool.<name>.revprompt
Request a single valid revision from the user, and set the REVI-
SION environment variable. In other aspects this option is simi-
lar to argprompt, and can be used together with it.
32
GIT-CONFIG(1)GIT-CONFIG(1)
guitool.<name>.revunmerged
Show only unmerged branches in the revprompt subdialog. This is
useful for tools similar to merge or rebase, but not for things
like checkout or reset.
guitool.<name>.title
Specifies the title to use for the prompt dialog. The default is
the tool name.
guitool.<name>.prompt
Specifies the general prompt string to display at the top of the
dialog, before subsections for argprompt and revprompt. The
default value includes the actual command.
help.browser
Specify the browser that will be used to display help in the web
format. See git-help(1).
help.format
Override the default help format used by git-help(1). Values
man, info, web and html are supported. man is the default. web
and html are the same.
help.autocorrect
Automatically correct and execute mistyped commands after wait-
ing for the given number of deciseconds (0.1 sec). If more than
one command can be deduced from the entered text, nothing will
be executed. If the value of this option is negative, the cor-
rected command will be executed immediately. If the value is 0 -
the command will be just shown but not executed. This is the
default.
http.proxy
Override the HTTP proxy, normally configured using the
http_proxy environment variable (see curl(1)). This can be over-
ridden on a per-remote basis; see remote.<name>.proxy
http.sslVerify
Whether to verify the SSL certificate when fetching or pushing
over HTTPS. Can be overridden by the GIT_SSL_NO_VERIFY environ-
ment variable.
http.sslCert
File containing the SSL certificate when fetching or pushing
over HTTPS. Can be overridden by the GIT_SSL_CERT environment
variable.
33
GIT-CONFIG(1)GIT-CONFIG(1)
http.sslKey
File containing the SSL private key when fetching or pushing
over HTTPS. Can be overridden by the GIT_SSL_KEY environment
variable.
http.sslCertPasswordProtected
Enable git’s password prompt for the SSL certificate. Oth-
erwise OpenSSL will prompt the user, possibly many times, if the
certificate or private key is encrypted. Can be overridden by
the GIT_SSL_CERT_PASSWORD_PROTECTED environment variable.
http.sslCAInfo
File containing the certificates to verify the peer with when
fetching or pushing over HTTPS. Can be overridden by the
GIT_SSL_CAINFO environment variable.
http.sslCAPath
Path containing files with the CA certificates to verify the
peer with when fetching or pushing over HTTPS. Can be overridden
by the GIT_SSL_CAPATH environment variable.
http.maxRequests
How many HTTP requests to launch in parallel. Can be overridden
by the GIT_HTTP_MAX_REQUESTS environment variable. Default is 5.
http.minSessions
The number of curl sessions (counted across slots) to be kept
across requests. They will not be ended with curl_easy_cleanup()
until http_cleanup() is invoked. If USE_CURL_MULTI is not
defined, this value will be capped at 1. Defaults to 1.
http.postBuffer
Maximum size in bytes of the buffer used by smart HTTP trans-
ports when POSTing data to the remote system. For requests
larger than this buffer size, HTTP/1.1 and Transfer-Encoding:
chunked is used to avoid creating a massive pack file locally.
Default is 1 MiB, which is sufficient for most requests.
http.lowSpeedLimit, http.lowSpeedTime
If the HTTP transfer speed is less than http.lowSpeedLimit for
longer than http.lowSpeedTime seconds, the transfer is aborted.
Can be overridden by the GIT_HTTP_LOW_SPEED_LIMIT and
GIT_HTTP_LOW_SPEED_TIME environment variables.
http.noEPSV
A boolean which disables using of EPSV ftp command by curl. This
34
GIT-CONFIG(1)GIT-CONFIG(1)
can helpful with some "poor" ftp servers which don’t sup-
port EPSV mode. Can be overridden by the GIT_CURL_FTP_NO_EPSV
environment variable. Default is false (curl will use EPSV).
http.useragent
The HTTP USER_AGENT string presented to an HTTP server. The
default value represents the version of the client git such as
git/1.7.1. This option allows you to override this value to a
more common value such as Mozilla/4.0. This may be necessary,
for instance, if connecting through a firewall that restricts
HTTP connections to a set of common USER_AGENT strings (but not
including those like git/1.7.1). Can be overridden by the
GIT_HTTP_USER_AGENT environment variable.
i18n.commitEncoding
Character encoding the commit messages are stored in; git itself
does not care per se, but this information is necessary e.g.
when importing commits from emails or in the gitk graphical his-
tory browser (and possibly at other places in the future or in
other porcelains). See e.g. git-mailinfo(1). Defaults to utf-8.
i18n.logOutputEncoding
Character encoding the commit messages are converted to when
running git log and friends.
imap The configuration variables in the imap section are described in
git-imap-send(1).
init.templatedir
Specify the directory from which templates will be copied. (See
the "TEMPLATE DIRECTORY" section of git-init(1).)
instaweb.browser
Specify the program that will be used to browse your working
repository in gitweb. See git-instaweb(1).
instaweb.httpd
The HTTP daemon command-line to start gitweb on your working
repository. See git-instaweb(1).
instaweb.local
If true the web server started by git-instaweb(1) will be bound
to the local IP (127.0.0.1).
35
GIT-CONFIG(1)GIT-CONFIG(1)
instaweb.modulepath
The default module path for git-instaweb(1) to use instead of
/usr/lib/apache2/modules. Only used if httpd is Apache.
instaweb.port
The port number to bind the gitweb httpd to. See
git-instaweb(1).
interactive.singlekey
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter). Currently
this is used only by the \--patch mode of git-add(1). Note that
this setting is silently ignored if portable keystroke input is
not available.
log.date
Set the default date-time mode for the log command. Setting a
value for log.date is similar to using git log's \--date option.
Possible values are relative, local, default, iso, rfc, and
short; see git-log(1) for details.
log.decorate
Print out the ref names of any commits that are shown by the log
command. If short is specified, the ref name prefixes
refs/heads/, refs/tags/ and refs/remotes/ will not be printed.
If full is specified, the full ref name (including prefix) will
be printed. This is the same as the log commands --decorate
option.
log.showroot
If true, the initial commit will be shown as a big creation
event. This is equivalent to a diff against an empty tree. Tools
like git-log(1) or git-whatchanged(1), which normally hide the
root commit will now show it. True by default.
mailmap.file
The location of an augmenting mailmap file. The default mailmap,
located in the root of the repository, is loaded first, then the
mailmap file pointed to by this variable. The location of the
mailmap file may be in a repository subdirectory, or somewhere
outside of the repository itself. See git-shortlog(1) and
git-blame(1).
man.viewer
Specify the programs that may be used to display help in the man
format. See git-help(1).
36
GIT-CONFIG(1)GIT-CONFIG(1)
man.<tool>.cmd
Specify the command to invoke the specified man viewer. The
specified command is evaluated in shell with the man page passed
as argument. (See git-help(1).)
man.<tool>.path
Override the path for the given tool that may be used to display
help in the man format. See git-help(1).
merge.conflictstyle
Specify the style in which conflicted hunks are written out to
working tree files upon merge. The default is "merge", which
shows a <<<<<<< conflict marker, changes made by one side, a
======= marker, changes made by the other side, and then a
>>>>>>> marker. An alternate style, "diff3", adds a |||||||
marker and the original text before the ======= marker.
merge.log
Whether to include summaries of merged commits in newly created
merge commit messages. False by default.
merge.renameLimit
The number of files to consider when performing rename detection
during a merge; if not specified, defaults to the value of
diff.renameLimit.
merge.renormalize
Tell git that canonical representation of files in the reposi-
tory has changed over time (e.g. earlier commits record text
files with CRLF line endings, but recent ones use LF line end-
ings). In such a repository, git can convert the data recorded
in commits to a canonical form before performing a merge to
reduce unnecessary conflicts. For more information, see section
"Merging branches with differing checkin/checkout attributes" in
gitattributes(5).
merge.stat
Whether to print the diffstat between ORIG_HEAD and the merge
result at the end of the merge. True by default.
merge.tool
Controls which merge resolution program is used by git-merge-
tool(1). Valid built-in values are: "kdiff3", "tkdiff", "meld",
"xxdiff", "emerge", "vimdiff", "gvimdiff", "diffuse", "ecmerge",
"tortoisemerge", "p4merge", "araxis" and "opendiff". Any other
value is treated is custom merge tool and there must be a corre-
sponding mergetool.<tool>.cmd option.
37
GIT-CONFIG(1)GIT-CONFIG(1)
merge.verbosity
Controls the amount of output shown by the recursive merge
strategy. Level 0 outputs nothing except a final error message
if conflicts were detected. Level 1 outputs only conflicts, 2
outputs conflicts and file changes. Level 5 and above outputs
debugging information. The default is level 2. Can be overridden
by the GIT_MERGE_VERBOSITY environment variable.
merge.<driver>.name
Defines a human-readable name for a custom low-level merge
driver. See gitattributes(5) for details.
merge.<driver>.driver
Defines the command that implements a custom low-level merge
driver. See gitattributes(5) for details.
merge.<driver>.recursive
Names a low-level merge driver to be used when performing an
internal merge between common ancestors. See gitattributes(5)
for details.
mergetool.<tool>.path
Override the path for the given tool. This is useful in case
your tool is not in the PATH.
mergetool.<tool>.cmd
Specify the command to invoke the specified merge tool. The
specified command is evaluated in shell with the following vari-
ables available: BASE is the name of a temporary file containing
the common base of the files to be merged, if available; LOCAL
is the name of a temporary file containing the contents of the
file on the current branch; REMOTE is the name of a temporary
file containing the contents of the file from the branch being
merged; MERGED contains the name of the file to which the merge
tool should write the results of a successful merge.
mergetool.<tool>.trustExitCode
For a custom merge command, specify whether the exit code of the
merge command can be used to determine whether the merge was
successful. If this is not set to true then the merge target
file timestamp is checked and the merge assumed to have been
successful if the file has been updated, otherwise the user is
prompted to indicate the success of the merge.
mergetool.keepBackup
After performing a merge, the original file with conflict mark-
ers can be saved as a file with a .orig extension. If this
38
GIT-CONFIG(1)GIT-CONFIG(1)
variable is set to false then this file is not preserved.
Defaults to true (i.e. keep the backup files).
mergetool.keepTemporaries
When invoking a custom merge tool, git uses a set of temporary
files to pass to the tool. If the tool returns an error and this
variable is set to true, then these temporary files will be pre-
served, otherwise they will be removed after the tool has
exited. Defaults to false.
mergetool.prompt
Prompt before each invocation of the merge resolution program.
notes.displayRef
The (fully qualified) refname from which to show notes when
showing commit messages. The value of this variable can be set
to a glob, in which case notes from all matching refs will be
shown. You may also specify this configuration variable several
times. A warning will be issued for refs that do not exist, but
a glob that does not match any refs is silently ignored.
This setting can be overridden with the GIT_NOTES_DISPLAY_REF
environment variable, which must be a colon separated list of
refs or globs.
The effective value of "core.notesRef" (possibly overridden by
GIT_NOTES_REF) is also implicitly added to the list of refs to
be displayed.
notes.rewrite.<command>
When rewriting commits with <command> (currently amend or
rebase) and this variable is set to true, git automatically
copies your notes from the original to the rewritten commit.
Defaults to true, but see "notes.rewriteRef" below.
notes.rewriteMode
When copying notes during a rewrite (see the
"notes.rewrite.<command>" option), determines what to do if the
target commit already has a note. Must be one of overwrite, con-
catenate, or ignore. Defaults to concatenate.
This setting can be overridden with the GIT_NOTES_REWRITE_MODE
environment variable.
notes.rewriteRef
When copying notes during a rewrite, specifies the (fully quali-
fied) ref whose notes should be copied. The ref may be a glob,
in which case notes in all matching refs will be copied. You may
39
GIT-CONFIG(1)GIT-CONFIG(1)
also specify this configuration several times.
Does not have a default value; you must configure this variable
to enable note rewriting.
This setting can be overridden with the GIT_NOTES_REWRITE_REF
environment variable, which must be a colon separated list of
refs or globs.
pack.window
The size of the window used by git-pack-objects(1) when no win-
dow size is given on the command line. Defaults to 10.
pack.depth
The maximum delta depth used by git-pack-objects(1) when no max-
imum depth is given on the command line. Defaults to 50.
pack.windowMemory
The window memory size limit used by git-pack-objects(1) when no
limit is given on the command line. The value can be suffixed
with "k", "m", or "g". Defaults to 0, meaning no limit.
pack.compression
An integer -1..9, indicating the compression level for objects
in a pack file. -1 is the zlib default. 0 means no compression,
and 1..9 are various speed/size tradeoffs, 9 being slowest. If
not set, defaults to core.compression. If that is not set,
defaults to -1, the zlib default, which is "a default compromise
between speed and compression (currently equivalent to level
6)."
Note that changing the compression level will not automatically
recompress all existing objects. You can force recompression by
passing the -F option to git-repack(1).
pack.deltaCacheSize
The maximum memory in bytes used for caching deltas in
git-pack-objects(1) before writing them out to a pack. This
cache is used to speed up the writing object phase by not having
to recompute the final delta result once the best match for all
objects is found. Repacking large repositories on machines which
are tight with memory might be badly impacted by this though,
especially if this cache pushes the system into swapping. A
value of 0 means no limit. The smallest size of 1 byte may be
used to virtually disable this cache. Defaults to 256 MiB.
pack.deltaCacheLimit
The maximum size of a delta, that is cached in
40
GIT-CONFIG(1)GIT-CONFIG(1)git-pack-objects(1). This cache is used to speed up the writing
object phase by not having to recompute the final delta result
once the best match for all objects is found. Defaults to 1000.
pack.threads
Specifies the number of threads to spawn when searching for best
delta matches. This requires that git-pack-objects(1) be com-
piled with pthreads otherwise this option is ignored with a
warning. This is meant to reduce packing time on multiprocessor
machines. The required amount of memory for the delta search
window is however multiplied by the number of threads. Specify-
ing 0 will cause git to auto-detect the number of CPU’s
and set the number of threads accordingly.
pack.indexVersion
Specify the default pack index version. Valid values are 1 for
legacy pack index used by Git versions prior to 1.5.2, and 2 for
the new pack index with capabilities for packs larger than 4 GB
as well as proper protection against the repacking of corrupted
packs. Version 2 is the default. Note that version 2 is enforced
and this config option ignored whenever the corresponding pack
is larger than 2 GB.
If you have an old git that does not understand the version 2
{asterisk}.idx file, cloning or fetching over a non native pro-
tocol (e.g. "http" and "rsync") that will copy both {aster-
isk}.pack file and corresponding {asterisk}.idx file from the
other side may give you a repository that cannot be accessed
with your older version of git. If the {asterisk}.pack file is
smaller than 2 GB, however, you can use git-index-pack(1) on the
*.pack file to regenerate the {asterisk}.idx file.
pack.packSizeLimit
The maximum size of a pack. This setting only affects packing to
a file when repacking, i.e. the git:// protocol is unaffected.
It can be overridden by the \--max-pack-size option of
git-repack(1). The minimum size allowed is limited to 1 MiB. The
default is unlimited. Common unit suffixes of k, m, or g are
supported.
pager.<cmd>
Allows turning on or off pagination of the output of a particu-
lar git subcommand when writing to a tty. If \--paginate or
\--no-pager is specified on the command line, it takes prece-
dence over this option. To disable pagination for all commands,
set core.pager or GIT_PAGER to cat.
pretty.<name>
Alias for a --pretty= format string, as specified in git-log(1).
41
GIT-CONFIG(1)GIT-CONFIG(1)
Any aliases defined here can be used just as the built-in pretty
formats could. For example, running git config pretty.changelog
"format:{asterisk} %H %s" would cause the invocation git log
--pretty=changelog to be equivalent to running git log
"--pretty=format:{asterisk} %H %s". Note that an alias with the
same name as a built-in format will be silently ignored.
pull.octopus
The default merge strategy to use when pulling multiple branches
at once.
pull.twohead
The default merge strategy to use when pulling a single branch.
push.default
Defines the action git push should take if no refspec is given
on the command line, no refspec is configured in the remote, and
no refspec is implied by any of the options given on the command
line. Possible values are:
o nothing - do not push anything.
o matching - push all matching branches. All branches having
the same name in both ends are considered to be matching.
This is the default.
o tracking - push the current branch to its upstream branch.
o current - push the current branch to a branch of the same
name.
rebase.stat
Whether to show a diffstat of what changed upstream since the
last rebase. False by default.
rebase.autosquash
If set to true enable --autosquash option by default.
receive.autogc
By default, git-receive-pack will run "git-gc --auto" after
receiving data from git-push and updating refs. You can stop it
by setting this variable to false.
42
GIT-CONFIG(1)GIT-CONFIG(1)
receive.fsckObjects
If it is set to true, git-receive-pack will check all received
objects. It will abort in the case of a malformed object or a
broken link. The result of an abort are only dangling objects.
Defaults to false.
receive.unpackLimit
If the number of objects received in a push is below this limit
then the objects will be unpacked into loose object files. How-
ever if the number of received objects equals or exceeds this
limit then the received pack will be stored as a pack, after
adding any missing delta bases. Storing the pack from a push can
make the push operation complete faster, especially on slow
filesystems. If not set, the value of transfer.unpackLimit is
used instead.
receive.denyDeletes
If set to true, git-receive-pack will deny a ref update that
deletes the ref. Use this to prevent such a ref deletion via a
push.
receive.denyDeleteCurrent
If set to true, git-receive-pack will deny a ref update that
deletes the currently checked out branch of a non-bare reposi-
tory.
receive.denyCurrentBranch
If set to true or "refuse", git-receive-pack will deny a ref
update to the currently checked out branch of a non-bare reposi-
tory. Such a push is potentially dangerous because it brings the
HEAD out of sync with the index and working tree. If set to
"warn", print a warning of such a push to stderr, but allow the
push to proceed. If set to false or "ignore", allow such pushes
with no message. Defaults to "refuse".
receive.denyNonFastForwards
If set to true, git-receive-pack will deny a ref update which is
not a fast-forward. Use this to prevent such an update via a
push, even if that push is forced. This configuration variable
is set when initializing a shared repository.
receive.updateserverinfo
If set to true, git-receive-pack will run git-update-server-info
after receiving data from git-push and updating refs.
remote.<name>.url
The URL of a remote repository. See git-fetch(1) or git-push(1).
43
GIT-CONFIG(1)GIT-CONFIG(1)
remote.<name>.pushurl
The push URL of a remote repository. See git-push(1).
remote.<name>.proxy
For remotes that require curl (http, https and ftp), the URL to
the proxy to use for that remote. Set to the empty string to
disable proxying for that remote.
remote.<name>.fetch
The default set of "refspec" for git-fetch(1). See git-fetch(1).
remote.<name>.push
The default set of "refspec" for git-push(1). See git-push(1).
remote.<name>.mirror
If true, pushing to this remote will automatically behave as if
the \--mirror option was given on the command line.
remote.<name>.skipDefaultUpdate
If true, this remote will be skipped by default when updating
using git-fetch(1) or the update subcommand of git-remote(1).
remote.<name>.skipFetchAll
If true, this remote will be skipped by default when updating
using git-fetch(1) or the update subcommand of git-remote(1).
remote.<name>.receivepack
The default program to execute on the remote side when pushing.
See option --receive-pack of git-push(1).
remote.<name>.uploadpack
The default program to execute on the remote side when fetching.
See option --upload-pack of git-fetch-pack(1).
remote.<name>.tagopt
Setting this value to --no-tags disables automatic tag following
when fetching from remote <name>. Setting it to --tags will
fetch every tag from remote <name>, even if they are not reach-
able from remote branch heads. Passing these flags directly to
git-fetch(1) can override this setting. See options --tags and
--no-tags of git-fetch(1).
remote.<name>.vcs
Setting this to a value <vcs> will cause git to interact with
44
GIT-CONFIG(1)GIT-CONFIG(1)
the remote with the git-remote-<vcs> helper.
remotes.<group>
The list of remotes which are fetched by "git remote update
<group>". See git-remote(1).
repack.usedeltabaseoffset
By default, git-repack(1) creates packs that use delta-base off-
set. If you need to share your repository with git older than
version 1.4.4, either directly or via a dumb protocol such as
http, then you need to set this option to "false" and repack.
Access from old git versions over the native protocol are unaf-
fected by this option.
rerere.autoupdate
When set to true, git-rerere updates the index with the result-
ing contents after it cleanly resolves conflicts using previ-
ously recorded resolution. Defaults to false.
rerere.enabled
Activate recording of resolved conflicts, so that identical con-
flict hunks can be resolved automatically, should they be
encountered again. git-rerere(1) command is by default enabled
if you create rr-cache directory under $GIT_DIR, but can be dis-
abled by setting this option to false.
sendemail.identity
A configuration identity. When given, causes values in the
sendemail.<identity> subsection to take precedence over values
in the sendemail section. The default identity is the value of
sendemail.identity.
sendemail.smtpencryption
See git-send-email(1) for description. Note that this setting is
not subject to the identity mechanism.
sendemail.smtpssl
Deprecated alias for sendemail.smtpencryption = ssl.
sendemail.<identity>.*
Identity-specific versions of the sendemail.* parameters found
below, taking precedence over those when the this identity is
selected, through command-line or sendemail.identity.
45
GIT-CONFIG(1)GIT-CONFIG(1)
sendemail.aliasesfile, sendemail.aliasfiletype, sendemail.bcc, sende-
mail.cc, sendemail.cccmd, sendemail.chainreplyto,
sendemail.confirm, sende- mail.envelopesender, sendemail.from,
sendemail.multiedit, sendemail.signedoff- bycc, sendemail.smtppass,
sendemail.suppresscc, sendemail.suppressfrom, sende- mail.to,
sendemail.smtpdomain, sendemail.smtpserver, sendemail.smtpserverport,
sendemail.smtpuser, sendemail.thread, sendemail.validate
See git-send-email(1) for description.
sendemail.signedoffcc
Deprecated alias for sendemail.signedoffbycc.
showbranch.default
The default set of branches for git-show-branch(1). See
git-show-branch(1).
status.relativePaths
By default, git-status(1) shows paths relative to the current
directory. Setting this variable to false shows paths relative
to the repository root (this was the default for git prior to
v1.5.4).
status.showUntrackedFiles
By default, git-status(1) and git-commit(1) show files which are
not currently tracked by Git. Directories which contain only
untracked files, are shown with the directory name only. Showing
untracked files means that Git needs to lstat() all all the
files in the whole repository, which might be slow on some sys-
tems. So, this variable controls how the commands displays the
untracked files. Possible values are:
o no - Show no untracked files.
o normal - Show untracked files and directories.
o all - Show also individual files in untracked directories.
If this variable is not specified, it defaults to normal. This
variable can be overridden with the -u|--untracked-files option
of git-status(1) and git-commit(1).
status.submodulesummary
Defaults to false. If this is set to a non zero number or true
(identical to -1 or an unlimited number), the submodule summary
will be enabled and a summary of commits for modified submodules
will be shown (see --summary-limit option of git-submodule(1)).
46
GIT-CONFIG(1)GIT-CONFIG(1)
submodule.<name>.path, submodule.<name>.url, submodule.<name>.update
The path within this project, URL, and the updating strategy for
a submodule. These variables are initially populated by git sub-
module init; edit them to override the URL and other values
found in the .gitmodules file. See git-submodule(1) and gitmod-
ules(5) for details.
submodule.<name>.ignore
Defines under what circumstances "git status" and the diff fam-
ily show a submodule as modified. When set to "all", it will
never be considered modified, "dirty" will ignore all changes to
the submodules work tree and takes only differences between the
HEAD of the submodule and the commit recorded in the superpro-
ject into account. "untracked" will additionally let submodules
with modified tracked files in their work tree show up. Using
"none" (the default when this option is not set) also shows sub-
modules that have untracked files in their work tree as changed.
This setting overrides any setting made in .gitmodules for this
submodule, both settings can be overridden on the command line
by using the "--ignore-submodules" option.
tar.umask
This variable can be used to restrict the permission bits of tar
archive entries. The default is 0002, which turns off the world
write bit. The special value "user" indicates that the archiving
user’s umask will be used instead. See umask(2) and
git-archive(1).
transfer.unpackLimit
When fetch.unpackLimit or receive.unpackLimit are not set, the
value of this variable is used instead. The default value is
100.
url.<base>.insteadOf
Any URL that starts with this value will be rewritten to start,
instead, with <base>. In cases where some site serves a large
number of repositories, and serves them with multiple access
methods, and some users need to use different access methods,
this feature allows people to specify any of the equivalent URLs
and have git automatically rewrite the URL to the best alterna-
tive for the particular user, even for a never-before-seen
repository on the site. When more than one insteadOf strings
match a given URL, the longest match is used.
url.<base>.pushInsteadOf
Any URL that starts with this value will not be pushed to;
instead, it will be rewritten to start with <base>, and the
resulting URL will be pushed to. In cases where some site serves
a large number of repositories, and serves them with multiple
47
GIT-CONFIG(1)GIT-CONFIG(1)
access methods, some of which do not allow push, this feature
allows people to specify a pull-only URL and have git automati-
cally use an appropriate URL to push, even for a
never-before-seen repository on the site. When more than one
pushInsteadOf strings match a given URL, the longest match is
used. If a remote has an explicit pushurl, git will ignore this
setting for that remote.
user.email
Your email address to be recorded in any newly created commits.
Can be overridden by the GIT_AUTHOR_EMAIL, GIT_COMMITTER_EMAIL,
and EMAIL environment variables. See git-commit-tree(1).
user.name
Your full name to be recorded in any newly created commits. Can
be overridden by the GIT_AUTHOR_NAME and GIT_COMMITTER_NAME
environment variables. See git-commit-tree(1).
user.signingkey
If git-tag(1) is not selecting the key you want it to automati-
cally when creating a signed tag, you can override the default
selection with this variable. This option is passed unchanged to
gpg’s --local-user parameter, so you may specify a key
using any method that gpg supports.
web.browser
Specify a web browser that may be used by some commands. Cur-
rently only git-instaweb(1) and git-help(1) may use it.
AUTHOR
Written by Johannes Schindelin <Johannes.Schindelin@gmx.de:
mailto:Johannes.Schindelin@gmx.de>
DOCUMENTATION
Documentation by Johannes Schindelin, Petr Baudis and the git-list
<git@vger.kernel.org: mailto:git@vger.kernel.org>.
GIT
Part of the git(1) suite
48