XScreenSaver man page on OSF1
Printed from http://www.polarhome.com/service/man/?qf=XScreenSaver&af=0&tf=2&of=OSF1
XScreenSaver(1) XScreenSaver(1)
NAME
xscreensaver - graphics hack and screen locker, launched when the user
is idle
SYNOPSIS
xscreensaver [-display host:display.screen] [-timeout int] [-cycle int]
[-lock-mode] [-no-lock-mode] [-lock-timeout int] [-visual visual]
[-install] [-no-install] [-verbose] [-silent] [-timestamp] [-cap‐
ture-stderr] [-no-capture-stderr] [-splash] [-no-splash] [-nice int]
[-mit-extension] [-no-mit-extension] [-sgi-extension] [-no-sgi-exten‐
sion] [-xidle-extension] [-no-xidle-extension] [-proc-interrupts]
[-no-proc-interrupts] [-xrm resources]
DESCRIPTION
The xscreensaver program waits until the keyboard and mouse have been
idle for a period, and then runs a graphics demo chosen at random. It
turns off as soon as there is any mouse or keyboard activity.
This program can lock your terminal in order to prevent others from
using it, though its default mode of operation is merely to display
pretty pictures on your screen when it is not in use.
The benefit that this program has over the combination of the xlock(1)
and xautolock(1) programs is the ease with which new graphics hacks can
be installed. You don't need to recompile (or even re-run) this pro‐
gram to add a new display mode.
GETTING STARTED
For the impatient, try this:
xscreensaver &
xscreensaver-demo
The xscreensaver-demo(1) program should pop up a dialog box that lets
you experiment with the xscreensaver settings and graphics modes.
Note: unlike xlock(1), xscreensaver has a client-server model: the
xscreensaver program is a daemon that runs in the background; it is
controlled by the foreground xscreensaver-demo(1) and xscreensaver-com‐
mand(1) programs.
CONFIGURATION
The easiest way to configure xscreensaver is to simply run the xscreen‐
saver-demo(1) program, and change the settings through the GUI. The
rest of this manual page describes lower level ways of changing set‐
tings.
Options to xscreensaver are stored in one of two places: in a .xscreen‐
saver file in your home directory; or in the X resource database. If
the .xscreensaver file exists, it overrides any settings in the
resource database.
The syntax of the .xscreensaver file is similar to that of the .Xde‐
faults file; for example, to set the timeout paramter in the .xscreen‐
saver file, you would write the following:
timeout: 5
whereas, in the .Xdefaults file, you would write
xscreensaver.timeout: 5
If you change a setting in the .xscreensaver file while xscreensaver is
already running, it will notice this, and reload the file. (The file
will be reloaded the next time the screen saver needs to take some
action, such as blanking or unblanking the screen, or picking a new
graphics mode.)
If you change a setting in your X resource database, or if you want
xscreensaver to notice your changes immediately instead of the next
time it wakes up, then you will need to tell the running xscreensaver
process to re-initialize itself, like so:
xscreensaver-command -restart
Note that if you changed the .Xdefaults file, you might also need to
run xrdb(1):
xrdb < ~/.Xdefaults
If you want to set the system-wide defaults, then make your edits to
the xscreensaver app-defaults file, which should have been installed
when xscreensaver itself was installed. The app-defaults file will
usually be named /usr/lib/X11/app-defaults/XScreenSaver, but different
systems might keep it in a different place (for example, /usr/open‐
win/lib/app-defaults/XScreenSaver on Solaris.)
When settings are changed in the Preferences dialog box (see above) the
current settings will be written to the .xscreensaver file. (The .Xde‐
faults file and the app-defaults file will never be written by xscreen‐
saver itself.)
timeout (class Time)
The screensaver will activate (blank the screen) after the key‐
board and mouse have been idle for this many minutes. Default
10 minutes.
cycle (class Time)
After the screensaver has been running for this many minutes,
the currently running graphics-hack sub-process will be killed
(with SIGTERM), and a new one started. If this is 0, then the
graphics hack will never be changed: only one demo will run
until the screensaver is deactivated by user activity. Default
10 minutes.
lock (class Boolean)
Enable locking: before the screensaver will turn off, it will
require you to type the password of the logged-in user (really,
the person who ran xscreensaver), or the root password. (Note:
this doesn't work if the screensaver is launched by xdm(1)
because it can't know the user-id of the logged-in user. See
the ``Using XDM(1)'' section, below.
lockTimeout (class Time)
If locking is enabled, this controls the length of the ``grace
period'' between when the screensaver activates, and when the
screen becomes locked. For example, if this is 5, and -timeout
is 10, then after 10 minutes, the screen would blank. If there
was user activity at 12 minutes, no password would be required
to un-blank the screen. But, if there was user activity at 15
minutes or later (that is, -lock-timeout minutes after activa‐
tion) then a password would be required. The default is 0,
meaning that if locking is enabled, then a password will be
required as soon as the screen blanks.
passwdTimeout (class Time)
If the screen is locked, then this is how many seconds the
password dialog box should be left on the screen before giving
up (default 30 seconds.) This should not be too large: the X
server is grabbed for the duration that the password dialog box
is up (for security purposes) and leaving the server grabbed
for too long can cause problems.
visualID (class VisualID)
Specify which X visual to use by default. (Note carefully that
this resource is called visualID, not merely visual; if you set
the visual resource instead, things will malfunction in obscure
ways for obscure reasons.)
Legal values for the VisualID resource are:
default Use the screen's default visual (the visual of the root
window.) This is the default.
best Use the visual which supports the most colors. Note,
however, that the visual with the most colors might be
a TrueColor visual, which does not support colormap
animation. Some programs have more interesting behav‐
ior when run on PseudoColor visuals than on TrueColor.
mono Use a monochrome visual, if there is one.
gray Use a grayscale or staticgray visual, if there is one
and it has more than one plane (that is, it's not mono‐
chrome.)
color Use the best of the color visuals, if there are any.
GL Use the visual that is best for OpenGL programs.
(OpenGL programs have somewhat different requirements
than other X programs.)
class where class is one of StaticGray, StaticColor, True‐
Color, GrayScale, PseudoColor, or DirectColor. Selects
the deepest visual of the given class.
number where number (decimal or hex) is interpreted as a vis‐
ual id number, as reported by the xdpyinfo(1) program;
in this way you can have finer control over exactly
which visual gets used, for example, to select a shal‐
lower one than would otherwise have been chosen.
Note that this option specifies only the default visual that
will be used: the visual used may be overridden on a program-
by-program basis. See the description of the programs
resource, below.
installColormap (class Boolean)
Install a private colormap while the screensaver is active, so
that the graphics hacks can get as many colors as possible.
This is the default. (This only applies when the screen's
default visual is being used, since non-default visuals get
their own colormaps automatically.) This can also be overrid‐
den on a per-hack basis: see the discussion of the default-n
name in the section about the programs resource.
verbose (class Boolean)
Whether to print diagnostics. Default false.
timestamp (class Boolean)
Whether to print the time of day along with any other diagnos‐
tic messages. Default false.
splash (class Boolean)
Whether to display a splash screen at startup. Default true.
splashDuration (class Time)
How long the splash screen should remain visible; default 5
seconds.
helpURL (class URL)
The splash screen has a Help button on it. When you press it,
it will display the web page indicated here in your web
browser.
loadURL (class LoadURL)
This is the shell command used to load a URL into your web
browser. The default setting will load it into Netscape if it
is already running, otherwise, will launch a new Netscape look‐
ing at the helpURL.
demoCommand (class DemoCommand)
This is the shell command run when the Demo button on the
splash window is pressed. It defaults to xscreensaver-demo.
prefsCommand (class PrefsCommand)
This is the shell command run when the Prefs button on the
splash window is pressed. It defaults to xscreen‐
saver-demo -prefs.
nice (class Nice)
The sub-processes created by xscreensaver will be ``niced'' to
this level, so that they are given lower priority than other
processes on the system, and don't increase the load unneces‐
sarily. The default is 10.
(Higher numbers mean lower priority; see nice(1) for details.)
fade (class Boolean)
If this is true, then when the screensaver activates, the cur‐
rent contents of the screen will fade to black instead of sim‐
ply winking out. This only works on displays with writable
colormaps, that is, if the screen's default visual is a Pseudo‐
Color visual. A fade will also be done when switching graphics
hacks (when the cycle timer expires.) Default: true.
unfade (class Boolean)
If this is true, then when the screensaver deactivates, the
original contents of the screen will fade in from black instead
of appearing immediately. This only works on displays with
writable colormaps, and if fade is true as well. Default
false.
fadeSeconds (class Time)
If fade is true, this is how long the fade will be in seconds
(default 3 seconds.)
fadeTicks (class Integer)
If fade is true, this is how many times a second the colormap
will be changed to effect a fade. Higher numbers yield
smoother fades, but may make the fades take longer than the
specified fadeSeconds if your server isn't fast enough to keep
up. Default 20.
captureStderr (class Boolean)
Whether xscreensaver should redirect its stdout and stderr
streams to the window itself. Since its nature is to take over
the screen, you would not normally see error messages generated
by xscreensaver or the sub-programs it runs; this resource will
cause the output of all relevant programs to be drawn on the
screensaver window itself, as well as being written to the con‐
trolling terminal of the screensaver driver process. Default
true.
font (class Font)
The font used for the stdout/stderr text, if captureStderr is
true. Default *-medium-r-*-140-*-m-* (a 14 point fixed-width
font.)
programs (class Programs)
The graphics hacks which xscreensaver runs when the user is
idle. The value of this resource is a string, one sh-syntax
command per line. Each line must contain exactly one command:
no semicolons, no ampersands.
When the screensaver starts up, one of these is selected at
random, and run. After the cycle period expires, it is killed,
and another is selected and run.
If the value of this resource is empty, then no programs will
be run; the screen will simply be made black.
If the display has multiple screens, then a different program
will be run for each screen. (All screens are blanked and
unblanked simultaniously.)
Note that you must escape the newlines; here is an example of
how you might set this in your ~/.xscreensaver file:
programs: \
qix -root \n\
ico -r -faces -sleep 1 -obj ico \n\
xdaliclock -builtin2 -root \n\
xv -root -rmode 5 image.gif -quit \n
Make sure your $PATH environment variable is set up correctly
before xscreensaver is launched, or it won't be able to find
the programs listed in the programs resource.
To use a program as a screensaver, two things are required:
that that program draw on the root window (or be able to be
configured to draw on the root window); and that that program
understand ``virtual root'' windows, as used by virtual window
managers such as tvtwm(1). (Generally, this is accomplished by
just including the "vroot.h" header file in the program's
source.)
If there are some programs that you want to run only when using
a color display, and others that you want to run only when
using a monochrome display, you can specify that like this:
mono: mono-program -root \n\
color: color-program -root \n\
More generally, you can specify the kind of visual that should
be used for the window on which the program will be drawing.
For example, if one program works best if it has a colormap,
but another works best if it has a 24-bit visual, both can be
accommodated:
PseudoColor: cmap-program -root \n\
TrueColor: 24bit-program -root \n\
In addition to the symbolic visual names described above (in
the discussion of the visualID resource) one other visual name
is supported in the programs list:
default-n
This is like default, but also requests the use of the
default colormap, instead of a private colormap. (That
is, it behaves as if the -no-install command-line option
was specified, but only for this particular hack.) This
is provided because some third-party programs that draw on
the root window (notably: xv(1), and xearth(1)) make
assumptions about the visual and colormap of the root win‐
dow: assumptions which xscreensaver can violate.
If you specify a particular visual for a program, and that vis‐
ual does not exist on the screen, then that program will not be
chosen to run. This means that on displays with multiple
screens of different depths, you can arrange for appropriate
hacks to be run on each. For example, if one screen is color
and the other is monochrome, hacks that look good in mono can
be run on one, and hacks that only look good in color will show
up on the other.
Normally you won't need to change the following resources:
pointerPollTime (class Time)
When server extensions are not in use, this controls how fre‐
quently xscreensaver checks to see if the mouse position or
buttons have changed. Default 5 seconds.
windowCreationTimeout (class Time)
When server extensions are not in use, this controls the delay
between when windows are created and when xscreensaver selects
events on them. Default 30 seconds.
initialDelay (class Time)
When server extensions are not in use, xscreensaver will wait
this many seconds before selecting events on existing windows,
under the assumption that xscreensaver is started during your
login procedure, and the window state may be in flux. Default
0. (This used to default to 30, but that was back in the days
when slow machines and X terminals were more common...)
sgiSaverExtension (class Boolean)
There are a number of different X server extensions which can
make xscreensaver's job easier. The next few resources specify
whether these extensions should be utilized if they are avail‐
able.
This resource controls whether the SGI SCREEN_SAVER server
extension will be used to decide whether the user is idle.
This is the default if xscreensaver has been compiled with sup‐
port for this extension (which is the default on SGI systems.).
If it is available, the SCREEN_SAVER method is faster and more
reliable than what will be done otherwise, so use it if you
can. (This extension is only available on Silicon Graphics
systems, unfortunately.)
mitSaverExtension (class Boolean)
This resource controls whether the MIT-SCREEN-SAVER server
extension will be used to decide whether the user is idle.
However, the default for this resource is false, because even
if this extension is available, it is flaky (and it also makes
the fade option not work properly.) Use of this extension is
not recommended.
xidleExtension (class Boolean)
This resource controls whether the XIDLE server extension will
be used to decide whether the user is idle. This is the
default if xscreensaver has been compiled with support for this
extension. (This extension is only available for X11R4 and
X11R5 systems, unfortunately.)
procInterrupts (class Boolean)
This resource controls whether the /proc/interrupts file should
be consulted to decide whether the user is idle. This is the
default if xscreensaver has been compiled on a system which
supports this mechanism (i.e., Linux systems.)
The benefit to doing this is that xscreensaver can note that
the user is active even when the X console is not the active
one: if the user is typing in another virtual console, xscreen‐
saver will notice that and will fail to activate. For example,
if you're playing Quake in VGA-mode, xscreensaver won't wake up
in the middle of your game and start competing for CPU.
The drawback to doing this is that perhaps you really do want
idleness on the X console to cause the X display to lock, even
if there is activity on other virtual consoles. If you want
that, then set this option to False. (Or just lock the X con‐
sole manually.)
The default value for this resource is True, on systems where
it works.
overlayStderr (class Boolean)
If captureStderr is True, and your server supports ``overlay''
visuals, then the text will be written into one of the higher
layers instead of into the same layer as the running screen‐
hack. Set this to False to disable that (though you shouldn't
need to.)
overlayTextForeground (class Foreground)
The foreground color used for the stdout/stderr text, if cap‐
tureStderr is true. Default: Yellow.
overlayTextBackground (class Background)
The background color used for the stdout/stderr text, if cap‐
tureStderr is true. Default: Black.
bourneShell (class BourneShell)
The pathname of the shell that xscreensaver uses to start sub‐
processes. This must be whatever your local variant of /bin/sh
is: in particular, it must not be csh.
COMMAND-LINE OPTIONS
xscreensaver also accepts the following command line options. Except
for the -display option, these command-line options are all simply
shorthand for the X resources described in the Configuration section,
above.
-display host:display.screen
The X display to use. For displays with multiple screens,
XScreenSaver will manage all screens on the display simultan‐
iously; the screen argument (the ``default'' screen) says which
screen should be used for dialog boxes (the password window,
Demo Mode, etc.)
-timeout minutes
Same as the timeout resource.
-cycle minutes
Same as the cycle resource.
-lock-mode
Same as setting the lock resource to true.
-no-lock-mode
Same as setting the lock resource to false.
-lock-timeout minutes
Same as the lockTimeout resource.
-visual visual
Same as the visualID resource.
-install
Same as setting the installColormap resource to true.
-no-install
Same as setting the installColormap resource to false.
-verbose
Same as setting the verbose resource to true.
-silent Same as setting the verbose resource to false.
-timestamp
Same as setting the timestamp resource to true.
-capture-stderr
Same as setting the captureStderr resource to true.
-no-capture-stderr
Same as setting the captureStderr resource to false.
-splash Same as setting the splash resource to true.
-no-splash
Same as setting the splash resource to false.
-nice integer
Same as the nice resource.
-sgi-extension
Same as setting the sgiSaverExtension resource to true.
-no-sgi-extension
Same as setting the sgiSaverExtension resource to false.
-mit-extension
Same as setting the mitSaverExtension resource to true.
-no-mit-extension
Same as setting the mitSaverExtension resource to false.
-xidle-extension
Same as setting the xidleExtension resource to true.
-no-xidle-extension
Same as setting the xidleExtension resource to false.
-proc-interrupts
Same as setting the procInterrupts resource to true.
-no-proc-interrupts
Same as setting the procInterrupts resource to false.
-xrm resource-specification
As with all other Xt programs, you can specify X resources on
the command-line using the -xrm argument. Most of the inter‐
esting resources have command-line equivalents, however.
HOW IT WORKS
When it is time to activate the screensaver, a full-screen black window
is created on each screen of the display. Each window is created in
such a way that, to any subsequently-created programs, it will appear
to be a ``virtual root'' window. Because of this, any program which
draws on the root window (and which understands virtual roots) can be
used as a screensaver.
When the user becomes active again, the screensaver windows are
unmapped, and the running subprocesses are killed by sending them
SIGTERM. This is also how the subprocesses are killed when the screen‐
saver decides that it's time to run a different demo: the old one is
killed and a new one is launched.
Before launching a subprocess, xscreensaver stores an appropriate value
for $DISPLAY in the environment that the child will receive. (This is
so that if you start xscreensaver with a -display argument, the pro‐
grams which xscreensaver launches will draw on the same display; and so
that the child will end up drawing on the appropriate screen of a
multi-headed display.)
When the screensaver turns off, or is killed, care is taken to restore
the ``real'' virtual root window if there is one. Because of this, it
is important that you not kill the screensaver process with kill -9 if
you are running a virtual-root window manager. If you kill it with -9,
you may need to restart your window manager to repair the damage. This
isn't an issue if you aren't running a virtual-root window manager.
For all the gory details, see the commentary at the top of xscreen‐
saver.c.
You can control a running screensaver process by using the xscreen‐
saver-command(1) program (which see.)
POWER MANAGEMENT
Modern X servers contain support to power down the monitor after an
idle period. If the monitor has powered down, then xscreensaver will
notice this (after a few minutes), and will not waste CPU by drawing
graphics demos on a black screen. An attempt will also be made to
explicitly power the monitor back up as soon as user activity is
detected.
If your X server supports power management, then xset(1) will accept a
dpms option. So, if you wanted xscreensaver to activate after 5 min‐
utes, but you wanted your monitor to power down after one hour (3600
seconds) you would do this:
xset dpms 3600
See the man page for the xset(1) program for details. (Note that power
management requires both software support in the X server, and hardware
support in the monitor itself.)
USING XDM(1)
You can run xscreensaver from your xdm(1) session, so that the screen‐
saver will run even when nobody is logged in on the console.
The trick to using xscreensaver with xdm is this: keep in mind the two
very different states in which xscreensaver will be running:
1: Nobody logged in.
If you're thinking of running xscreensaver from XDM at all, then
it's probably because you want graphics demos to be running on
the console when nobody is logged in there. In this case,
xscreensaver will function only as a screen saver, not a screen
locker: it doesn't make sense for xscreensaver to lock the
screen, since nobody is logged in yet! The only thing on the
screen is the XDM login prompt.
2: Somebody logged in.
Once someone has logged in through the XDM login window, the
situation is very different. For example: now it makes sense to
lock the screen (and prompt for the logged in user's password);
and now xscreensaver should consult that user's ~/.xscreensaver
file; and so on.
The difference between these two states comes down to a question of,
which user is the xscreensaver process running as? For the first
state, it doesn't matter. If you start xscreensaver in the usual XDM
way, then xscreensaver will probably end up running as root, which is
fine for the first case (the ``nobody logged in'' case.)
However, once someone is logged in, running as root is no longer fine:
because xscreensaver will be consulting root's .xscreensaver file
instead of that of the logged in user, and won't be prompting for the
logged in user's password, and so on. (This is not a security problem,
it's just not what you want.)
So, once someone has logged in, you want xscreensaver to be running as
that user. The way to accomplish this is to kill the old xscreensaver
process and start a new one (as the new user.)
The simplest way to accomplish all of this is as follows:
1: Launch xscreensaver before anyone logs in.
To the file /usr/lib/X11/xdm/Xsetup, add the lines
xhost +localhost
xscreensaver-command -exit
xscreensaver &
This will run xscreensaver as root, over the XDM login window.
Moving the mouse will cause the screen to un-blank, and allow
the user to type their password at XDM to log in.
2: Restart xscreensaver when someone logs in.
Near the top of the file /usr/lib/X11/xdm/Xsession, add those
same lines:
xscreensaver-command -exit
xscreensaver &
When someone logs in, this will kill off the existing (root)
xscreensaver process, and start a new one, running as the user
who has just logged in. If the user's .xscreensaver file
requests locking, they'll get it. They will also get their own
choice of timeouts, and graphics demos, and so on.
Alternately, each user could just put those lines in their per‐
sonal ~/.xsession files.
Make sure you have $PATH set up correctly in the Xsetup and Xsession
scripts, or xdm won't be able to find xscreensaver, and/or xscreensaver
won't be able to find its graphics demos.
(If your system does not seem to be executing the Xsetup file, you may
need to configure it to do so: the traditional way to do this is to
make that file the value of the DisplayManager*setup resource in the
/usr/lib/X11/xdm/xdm-config file. See the man page for xdm(1) for more
details.)
It is safe to run xscreensaver as root (as xdm is likely to do.) If
run as root, xscreensaver changes its effective user and group ids to
something safe (like "nobody") before connecting to the X server or
launching user-specified programs.
An unfortunate side effect of this (important) security precaution is
that it may conflict with cookie-based authentication.
If you get "connection refused" errors when running xscreensaver from
xdm, then this probably means that you have xauth(1) or some other
security mechanism turned on. One way around this is to add
"xhost +localhost" to Xsetup, just before xscreensaver is launched.
Note that this will give access to the X server to anyone capable of
logging in to the local machine, so in some environments, this might
not be appropriate. If turning off file-system-based access control is
not acceptable, then running xscreensaver from the Xsetup file might
not be possible, and xscreensaver will only work when running as a nor‐
mal, unprivileged user.
For more information on the X server's access control mechanisms, see
the man pages for X(1), Xsecurity(1), xauth(1), and xhost(1).
USING GDM(1)
The instructions for using xscreensaver with gdm(1) are almost the same
as for using xdm(1), above. There are only two differences, really:
instead of editing /usr/lib/X11/xdm/Xsetup, edit the file
/etc/X11/gdm/Init/Default; and instead of editing
/usr/lib/X11/xdm/Xsession, edit one or all of the files in the
/etc/X11/gdm/Sessions/ directory. (Note that the default session
(/etc/X11/gdm/Sessions/Default) usually simply executes
/usr/lib/X11/xdm/Xsession, so be careful you aren't initializing
xscreensaver twice.)
All the same caveats apply for gdm(1) as for xdm(1).
USING CDE (COMMON DESKTOP ENVIRONMENT)
The easiest way to use xscreensaver on a system with CDE is to simply
switch off the built-in CDE screensaver, and use xscreensaver instead;
and second, to tell the front panel to run xscreensaver-command(1) with
the -lock option when the Lock icon is clicked.
To accomplish this involves five steps:
1: Switch off CDE's locker
Do this by turning off ``Screen Saver and Screen Lock'' in the
Screen section of the Style Manager.
2: Edit sessionetc
Edit the file ~/.dt/sessions/sessionetc and add to it the line
xscreensaver &
This will cause xscreensaver to be launched when you log in.
(As always, make sure that xscreensaver and the graphics demos
are on your $PATH; the path needs to be set in .cshrc and/or
.dtprofile, not .login.)
3: Create XScreenSaver.dt
Create a file called ~/.dt/types/XScreenSaver.dt with the fol‐
lowing contents:
ACTION XScreenSaver
{
LABEL XScreenSaver
TYPE COMMAND
EXEC_STRING xscreensaver-command -lock
ICON Dtkey
WINDOW_TYPE NO_STDIO
}
This defines a ``lock'' command for the CDE front panel, that
knows how to talk to xscreensaver.
4: Create Lock.fp
Create a file called ~/.dt/types/Lock.fp with the following con‐
tents:
CONTROL Lock
{
TYPE icon
CONTAINER_NAME Switch
CONTAINER_TYPE SWITCH
POSITION_HINTS 1
ICON Fplock
LABEL Lock
PUSH_ACTION XScreenSaver
HELP_TOPIC FPOnItemLock
HELP_VOLUME FPanel
}
This associates the CDE front panel ``Lock'' icon with the lock
command we just defined in step 3.
5: Restart
Select ``Restart Workspace Manager'' from the popup menu to make
your changes take effect. If things seem not to be working,
check the file ~/.dt/errorlog for error messages.
USING HP VUE (VISUAL USER ENVIRONMENT)
Since CDE is a descendant of VUE, the instructions for using xscreen‐
saver under VUE are similar to the above:
1: Switch off VUE's locker
Open the ``Style Manager'' and select ``Screen.'' Turn off
``Screen Saver and Screen Lock'' option.
2: Make sure you have a Session
Next, go to the Style Manager's, ``Startup'' page. Click on
``Set Home Session'' to create a session, then on ``Return to
Home Session'' to select this session each time you log in.
3: Edit vue.session
Edit the file ~/.vue/sessions/home/vue.session and add to it the
line
vuesmcmd -screen 0 -cmd "xscreensaver"
This will cause xscreensaver to be launched when you log in.
(As always, make sure that xscreensaver and the graphics demos
are on your $PATH; the path needs to be set in .cshrc and/or
.profile, not .login.)
3: Edit vuewmrc
Edit the file ~/.vue/vuewmrc and add (or change) the Lock con‐
trol:
CONTROL Lock
{
TYPE button
IMAGE lock
PUSH_ACTION f.exec "xscreensaver-command -lock"
HELP_TOPIC FPLock
}
This associates the VUE front panel ``Lock'' icon with the
xscreensaver lock command.
ADDING TO MENUS
The xscreensaver-command(1) program is a perfect candidate for some‐
thing to add to your window manager's popup menus. If you use mwm(1),
4Dwm(1), twm(1), or (probably) any of twm's many descendants, you can
do it like this:
1. Create ~/.mwmrc (or ~/.twmrc or ...)
If you don't have a ~/.mwmrc file (or, on SGIs, a ~/.4Dwmrc file;
or, with twm, a ~/.twmrc file) then create one by making a copy of
the /usr/lib/X11/system.mwmrc file (or /usr/lib/X11/twm/sys‐
tem.twmrc, and so on.)
2. Add a menu definition.
Something like this:
menu XScreenSaver
{
"Blank Screen Now" !"sleep 3; xscreensaver-command -activate"
"Lock Screen Now" !"sleep 3; xscreensaver-command -lock"
"Screen Saver Demo" !"xscreensaver-demo"
"Screen Saver Preferences" !"xscreensaver-demo -prefs"
"Reinitialize Screen Saver" !"xscreensaver-command -restart"
"Kill Screen Saver" !"xscreensaver-command -exit"
"Launch Screen Saver" !"xscreensaver &"
}
3. Add the menu
For mwm(1) and 4Dwm(1), find the section of the file that says Menu
DefaultRootMenu. For twm(1), it will probably be menu "defops". If
you add a line somewhere in that menu definition that reads
"XScreenSaver" f.menu XScreenSaver
then this will add an XScreenSaver sub-menu to your default root-
window popup menu. Alternately, you could just put the xscreensaver
menu items directly into the root menu.
For Fvwm2, the process is similar: first create a ~/.fvwm2rc file if
you don't already have one, by making a copy of the /etc/X11/fvwm2/sys‐
tem.fvwm2rc file. Then, add a menu definition to it:
AddToMenu XScreenSaver "XScreenSaver" Title
+ "Blank Screen Now" Exec xscreensaver-command -activate
+ "Lock Screen Now" Exec xscreensaver-command -lock
+ "Screen Saver Demo" Exec xscreensaver-command -demo
+ "Screen Saver Preferences" Exec xscreensaver-command -prefs
+ "Reinitialize Screen Saver" Exec xscreensaver-command -restart
+ "Kill Screen Saver" Exec xscreensaver-command -exit
+ "Launch Screen Saver" Exec xscreensaver
+ "Run Next Demo" Exec xscreensaver-command -next
+ "Run Previous Demo" Exec xscreensaver-command -prev
# To put the XScreenSaver sub-menu at the end of the root menu:
AddToMenu RootMenu "XScreenSaver" Popup XScreenSaver
The Enlightenment window manager keeps each of its menus in a separate
file. So, you need to create a file named ~/.enlightenment/xscreen‐
saver.menu with the contents:
"XScreenSaver Commands"
"Blank Screen Now" NULL exec "xscreensaver-command -activate"
"Lock Screen Now" NULL exec "xscreensaver-command -lock"
"Screen Saver Demo" NULL exec "xscreensaver-command -demo"
"Screen Saver Prefs" NULL exec "xscreensaver-command -prefs"
"Reinitialize Saver" NULL exec "xscreensaver-command -restart"
"Kill Screen Saver" NULL exec "xscreensaver-command -exit"
"Launch Screen Saver" NULL exec "xscreensaver"
then add
"XScreenSaver" NULL menu "xscreensaver.menu"
to ~/.enlightenment/file.menu to put the XScreenSaver submenu on your
left-button root-window menu.
As you see, every window manager does this stuff gratuitously differ‐
ently, just to make your life difficult. You are in a maze of twisty
menu configuration languages, all alike.
BUGS
Bugs? There are no bugs. Ok, well, maybe. If you find one, please
let me know. http://www.jwz.org/xscreensaver/bugs.html explains how to
construct the most useful bug reports.
Locking and XDM
If xscreensaver has been launched from xdm(1) before anyone has
logged in, you will need to kill and then restart the xscreen‐
saver daemon after you have logged in, or you will be confused
by the results. (For example, locking won't work, and your
~/.xscreensaver file will be ignored.)
When you are logged in, you want the xscreensaver daemon to be
running under your user id, not as root or some other user.
If it has already been started by xdm, you can kill it by send‐
ing it the exit command, and then re-launching it as you, by
putting something like the following in your personal X startup
script:
xscreensaver-command -exit
xscreensaver &
The ``Using XDM(1)'' section, above, goes into more detail, and
explains how to configure the system to do this for all users
automatically.
Locking and root logins
In order for it to be safe for xscreensaver to be launched by
xdm, certain precautions had to be taken, among them that
xscreensaver never runs as root. In particular, if it is
launched as root (as xdm is likely to do), xscreensaver will
disavow its privileges, and switch itself to a safe user id
(such as nobody.)
An implication of this is that if you log in as root on the
console, xscreensaver will refuse to lock the screen (because
it can't tell the difference between root being logged in on
the console, and a normal user being logged in on the console
but xscreensaver having been launched by the xdm(1) Xsetup
file.)
The solution to this is simple: you shouldn't be logging in on
the console as root in the first place! (What, are you crazy
or something?)
Proper Unix hygiene dictates that you should log in as your‐
self, and su(1) to root as necessary. People who spend their
day logged in as root are just begging for disaster.
XAUTH and XDM
For xscreensaver to work when launched by xdm(1), programs run‐
ning on the local machine as user "nobody" must be able to con‐
nect to the X server. This means that if you want to run
xscreensaver on the console while nobody is logged in, you may
need to disable cookie-based access control (and allow all
users who can log in to the local machine to connect to the
display.)
You should be sure that this is an acceptable thing to do in
your environment before doing it. See the ``Using XDM(1)''
section, above, for more details.
If anyone has suggestions on how xscreensaver could be made to
work with xdm(1) without first turning off .Xauthority-based
access control, please let me know.
Passwords
If you get an error message at startup like ``couldn't get
password of user'' then this probably means that you're on a
system in which the getpwent(3) library routine can only be
effectively used by root. If this is the case, then xscreen‐
saver must be installed as setuid to root in order for locking
to work. Care has been taken to make this a safe thing to do.
It also may mean that your system uses shadow passwords instead
of the standard getpwent(3) interface; in that case, you may
need to change some options with configure and recompile.
If you change your password after xscreensaver has been
launched, it will continue using your old password to unlock
the screen until xscreensaver is restarted. So, after you
change your password, you'll have to do
xscreensaver-command -restart
to make xscreensaver notice.
PAM Passwords
If your system uses PAM (Pluggable Authentication Modules),
then in order for xscreensaver to use PAM properly, PAM must be
told about xscreensaver. The xscreensaver installation process
should update the PAM data (on Linux, by creating the file
/etc/pam.d/xscreensaver for you, and on Solaris, by telling you
what lines to add to the /etc/pam.conf file.)
If the PAM configuration files do not know about xscreensaver,
then you might be in a situation where xscreensaver will refuse
to ever unlock the screen.
This is a design flaw in PAM (there is no way for a client to
tell the difference between PAM responding ``I have never heard
of your module,'' and responding, ``you typed the wrong pass‐
word.'') As far as I can tell, there is no way for xscreen‐
saver to automatically work around this, or detect the problem
in advance, so if you have PAM, make sure it is configured cor‐
rectly!
Colormap lossage: TWM
The installColormap option doesn't work very well with the
twm(1) window manager and its descendants.
There is a race condition between the screensaver and this win‐
dow manager, which can result in the screensaver's colormap not
getting installed properly, meaning the graphics hacks will
appear in essentially random colors. (If the screen goes white
instead of black, this is probably why.)
The mwm(1) and olwm(1) window managers don't have this problem.
The race condition exists because X (really, ICCCM) does not
provide a way for an OverrideRedirect window to have its own
colormap, short of grabbing the server (which is neither a good
idea, nor really possible with the current design.) What hap‐
pens is that, as soon as xscreensaver installs its colormap,
twm responds to the resultant ColormapNotify event by re-
instaling the default colormap. Apparently, twm doesn't always
do this; it seems to do it regularly if the screensaver is
activated from a menu item, but seems to not do it if the
screensaver comes on of its own volition, or is activated from
another console.
Attention, window manager authors!
You should only call XInstallColormap(3) in response to
user events. That is, it is appropriate to install a col‐
ormap in response to FocusIn, FocusOut, EnterNotify, and
LeaveNotify events; but it is not appropriate to call it in
response to ColormapNotify events. If you install col‐
ormaps in response to application actions as well as in
response to user actions, then you create the situation
where it is impossible for override-redirect applications
(such as xscreensaver) to display their windows in the
proper colors.
Colormap lossage: XV, XAnim, XEarth
Some programs don't operate properly on visuals other than the
default one, or with colormaps other than the default one. See
the discussion of the magic "default-n" visual name in the
description of the programs resource in the Configuration sec‐
tion. When programs only work with the default colormap, you
need to use a syntax like this:
default-n: xv -root image-1.gif -quit \n\
default-n: xearth -nostars -wait 0 \n\
It would also work to turn off the installColormap option alto‐
gether, but that would deny extra colors to those programs that
can take advantage of them.
Machine Load
Although this program ``nices'' the subprocesses that it
starts, graphics-intensive subprograms can still overload the
machine by causing the X server process itself (which is not
``niced'') to suck a lot of cycles. Care should be taken to
slow down programs intended for use as screensavers by insert‐
ing strategic calls to sleep(3) or usleep(3) (or making liberal
use of any -delay options which the programs may provide.)
Note that the OpenGL-based graphics demos are real pigs on
machines that don't have texture hardware.
Also, an active screensaver will cause your X server to be
pretty much permanently swapped in; but the same is true of any
program that draws periodically, like xclock(1) or xload(1).
Latency and Responsiveness
If the subprocess is drawing too quickly and the connection to
the X server is a slow one (such as an X terminal running over
a phone line) then the screensaver might not turn off right
away when the user becomes active again (the ico(1) demo has
this problem if being run in full-speed mode). This can be
alleviated by inserting strategic calls to XSync(3) in code
intended for use as a screensaver. This prevents too much
graphics activity from being buffered up.
XFree86's Magic Keystrokes
The XFree86 X server traps certain magic keystrokes before
client programs ever see them. Two that are of note are
Ctrl+Alt+Backspace, which causes the X server to exit; and
Ctrl+Alt+Fn, which switches virtual consoles. The X server
will respond to these keystrokes even if xscreensaver has the
screen locked. Depending on your setup, you might consider
this a problem.
Unfortunately, there is no way for xscreensaver itself to over‐
ride the interpretation of these keys. If you want to disable
Ctrl+Alt+Backspace globally, you need to set the DontZap flag
in your /etc/X11/XF86Config file. See the XF86Config(5) manual
for details.
There is no way (as far as I can tell) to disable the VT-
switching keystrokes.
Some Linux systems come with a VT_LOCKSWITCH ioctl, that one
could theoretically use to prevent VT-switching while the
screen is locked; but unfortunately, this ioctl can only be
used by root, which means that xscreensaver can't use it (since
xscreensaver disavows its privileges shortly after startup, for
security reasons.)
Any suggestions for other solutions to this problem are wel‐
come.
XView Clients
Apparently there are some problems with XView programs getting
confused and thinking that the screensaver window is the real
root window even when the screensaver is not active: ClientMes‐
sages intended for the window manager are sent to the screen‐
saver window instead. This could be solved by making xscreen‐
saver forward all unrecognised ClientMessages to the real root
window, but there may be other problems as well. If anyone has
any insight on the cause of this problem, please let me know.
(XView is an X11 toolkit that implements the (quite abominable)
Sun OpenLook look-and-feel.)
MIT Extension and Fading
The MIT-SCREEN-SAVER extension is junk. Don't use it.
When using the MIT-SCREEN-SAVER extension in conjunction with
the fade option, you'll notice an unattractive flicker just
before the fade begins. This is because the server maps a
black window just before it tells the xscreensaver process to
activate. The xscreensaver process immediately unmaps that
window, but this results in a flicker. I haven't figured a way
to get around this; it seems to be a fundamental property of
the (mis-) design of this server extension.
It sure would be nice if someone would implement the SGI
SCREEN_SAVER extension in XFree86; it's dead simple, and works
far better than the overengineered and broken MIT-SCREEN-SAVER
extension.
SGI Power Saver
If you're running Irix 6.3, you might find that your monitor is
powering down after an hour or two even if you've told it not
to. This is fixed by SGI patches 2447 and 2537.
If you're running Irix 6.5, this bug is back. I don't know a
fix.
MesaGL and Voodoo Cards
If you have a 3Dfx/Voodoo card, the default settings for
xscreensaver will run the GL-based graphics demos in such a way
that they will not take advantage of the 3D acceleration hard‐
ware. The solution is to change the programs entries for the
GL hacks from this:
gears -root \n\
to this:
MESA_GLX_FX=fullscreen gears \n\
That is, make sure that $MESA_GLX_FX is set to fullscreen, and
don't tell the program to draw on the root window. This may
seem strange, but the setup used by Mesa and these kinds of
cards is strange!
For those who don't know, these cards work by sitting between
your normal video card and the monitor, and seizing control of
the monitor when it's time to do 3D. But this means that
accelerated 3D only happens in full-screen mode (you can't do
it in a window, and you can't see the output of 3D and 2D pro‐
grams simultaniously), and that 3D will probably drive your
monitor at a lower resolution, as well. It's bizarre.
If you find that GL programs only work properly when run as
root, and not as normal users, then the problem is that your
/dev/3dfx file is not configured properly. Check the Linux
3Dfx FAQ.
Keyboard LEDs
If procInterrupts is on (which is the default on Linux systems)
and you're using some program that toggles the state of your
keyboard LEDs, xscreensaver won't work right: turning those
LEDs on or off causes a keyboard interrupt, which xscreensaver
will interpret as user activity. So if you're using such a
program, set the procInterrupts resource to False.
Extensions
If you are not making use of one of the server extensions
(XIDLE, SGI SCREEN_SAVER, or MIT-SCREEN-SAVER), then it is pos‐
sible, in rare situations, for xscreensaver to interfere with
event propagation and make another X program malfunction. For
this to occur, that other application would need to not select
KeyPress events on its non-leaf windows within the first 30
seconds of their existence, but then select for them later. In
this case, that client might fail to receive those events.
This isn't very likely, since programs generally select a con‐
stant set of events immediately after creating their windows
and then don't change them, but this is the reason that it's a
good idea to install and use one of the server extensions
instead, to work around this shortcoming in the X protocol.
In all these years, I've not heard of even a single case of
this happening, but it is theoretically possible, so I'm men‐
tioning it for completeness...
Red Hot Lava
There need to be a lot more graphics hacks. In particular,
there should be a simulation of a Lavalite (tm).
ENVIRONMENT
DISPLAY to get the default host and display number, and to inform the
sub-programs of the screen on which to draw.
PATH to find the sub-programs to run.
HOME for the directory in which to read and write the .xscreensaver
file.
XENVIRONMENT
to get the name of a resource file that overrides the global
resources stored in the RESOURCE_MANAGER property.
UPGRADES
The latest version can always be found at http://www.jwz.org/xscreen‐
saver/
SEE ALSO
X(1), xscreensaver-demo(1), xscreensaver-command(1), xscreen‐
saver-gl-helper(1), xdm(1), xset(1), Xsecurity(1), xauth(1), xhost(1).
ant(1), atlantis(1), attraction(1), blitspin(1), bouboule(1), braid(1),
bsod(1), bubble3d(1), bubbles(1), cage(1), compass(1), coral(1), criti‐
cal(1), crystal(1), cynosure(1), decayscreen(1), deco(1), deluxe(1),
demon(1), discrete(1), distort(1), drift(1), epicycle(1), fadeplot(1),
flag(1), flame(1), flow(1), forest(1), galaxy(1), gears(1),
glplanet(1), goop(1), grav(1), greynetic(1), halo(1), helix(1), hopa‐
long(1), hypercube(1), ifs(1), imsmap(1), interference(1), jigsaw(1),
julia(1), kaleidescope(1), kumppa(1), lament(1), laser(1), light‐
ning(1), lisa(1), lissie(1), lmorph(1), loop(1), maze(1), moebius(1),
moire(1), moire2(1), morph3d(1), mountain(1), munch(1), noseguy(1),
pedal(1), penetrate(1), penrose(1), petri(1), phosphor(1), pipes(1),
pulsar(1), pyro(1), qix(1), rd-bomb(1), rocks(1), rorschach(1),
rotor(1), rubik(1), sierpinski(1), slidescreen(1), slip(1), sonar(1),
sphere(1), spiral(1), spotlight(1), sproingies(1), squiral(1),
stairs(1), starfish(1), strange(1), superquadrics(1), swirl(1), t3d(1),
triangle(1), truchet(1), vines(1), wander(1), worm(1), xflame(1),
xjack(1), xlyap(1), xmatrix(1), bongo(1), ico(1), xaos(1),
xbouncebits(1), xcthugha(1), xdaliclock(1), xfishtank(1), xmoun‐
tains(1), xsplinefun(1), xswarm(1), xtacy(1), xv(1), chbg(1), xwave(1).
COPYRIGHT
Copyright © 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2001 by Jamie Zawinski. Permission to use, copy, modify, distribute,
and sell this software and its documentation for any purpose is hereby
granted without fee, provided that the above copyright notice appear in
all copies and that both that copyright notice and this permission
notice appear in supporting documentation. No representations are made
about the suitability of this software for any purpose. It is provided
"as is" without express or implied warranty.
AUTHOR
Jamie Zawinski <jwz@jwz.org>. Written in late 1991; first posted to
comp.sources.x on 13-Aug-1992.
Please let me know if you find any bugs or make any improvements.
ACKNOWLEDGEMENTS
Thanks to Angela Goodman for the XScreenSaver logo.
Thanks to the many people who have contributed graphics demos to the
package.
Thanks to David Wojtowicz for implementing lockTimeout.
Thanks to Martin Kraemer for adding support for shadow passwords and
locking-disabled diagnostics.
Thanks to Patrick Moreau for the VMS port.
Thanks to Mark Bowyer for figuring out how to hook it up to CDE.
Thanks to Nat Lanza for the Kerberos support.
Thanks to Bill Nottingham for the initial PAM support.
And thanks to Jon A. Christopher for implementing the Athena dialog
support, back in the days before Lesstif or Gtk were viable alterna‐
tives to Motif.
X Version 11 19-Mar-2001 (3.30) XScreenSaver(1)
[top]
_ _ _
| | | | | |
| | | | | |
__ | | __ __ | | __ __ | | __
\ \| |/ / \ \| |/ / \ \| |/ /
\ \ / / \ \ / / \ \ / /
\ / \ / \ /
\_/ \_/ \_/
More information is available in HTML format for server OSF1
List of man pages available for OSF1
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
Vote for polarhome
|