WSKBD(9) BSD Kernel Developer's Manual WSKBD(9)NAME
wskbd, wskbd_input, wskbd_rawinput, wskbd_cnattach, wskbd_cndetach,
wskbddevprint — wscons keyboard support
SYNOPSIS
#include <dev/wscons/wsconsio.h>
#include <dev/wscons/wskbdvar.h>
#include <dev/wscons/wsksymdef.h>
#include <dev/wscons/wsksymvar.h>
void
wskbd_input(struct device *kbddev, u_int type, int value);
void
wskbd_rawinput(struct device *kbddev, u_char *buf, int len);
void
wskbd_cnattach(const struct wskbd_consops *consops, void *conscookie,
const struct wskbd_mapdata *mapdata);
void
wskbd_cndetach();
int
wskbddevprint(void *aux, const char *pnp);
DESCRIPTION
The wskbd module is a component of the wscons(9) framework to provide
machine-independent keyboard support. Most of the support is provided by
the wskbd(4) device driver, which must be a child of the hardware device
driver.
DATA TYPES
Keyboard drivers providing support for wscons keyboards will make use of
the following data types:
kbd_t An opaque type describing keyboard properties.
keysym_t
The wscons keyboard-independent symbolic representation of the
keypress.
struct wskbd_accessops
A structure used to specify the keyboard access functions. All
keyboards must provide this structure and pass it to the
wskbd(4) child device. It has the following members:
int (*enable)(void *, int);
void (*set_leds)(void *, int);
int (*ioctl)(void *v, u_long cmd, void *data,
int flag, struct lwp *l);
The enable member defines the function to be called to enable
keypress passing to wscons. The set_leds member defined the
function to be called to set the LEDs on the keyboard. The
ioctl member defines the function to be called to perform key‐
board-specific ioctl calls.
There is a void * cookie provided by the keyboard driver associ‐
ated with these functions, which is passed to them when they are
invoked.
struct wskbd_consops
A structure used to specify the keyboard console operations.
All keyboards which can operate as a console must provide this
structure and pass it to the wskbd(4) child device. If the key‐
board cannot be a console, it is not necessary to specify this
structure. It has the following members:
void (*getc)(void *, u_int *, int *);
void (*pollc)(void *, int);
void (*bell)(void *, u_int, u_int, u_int);
There is a void * cookie provided by the keyboard driver associ‐
ated with these functions, which is passed to them when they are
invoked.
struct wscons_keydesc
A structure used to describe a keyboard mapping table to convert
keyboard-specific keycodes to wscons keysyms. It has the fol‐
lowing members:
kbd_t name; /* name of this map */
kbd_t base; /* map this one is based on */
int map_size; /* size of map */
const keysym_t *map; /* the map itself */
struct wskbd_mapdata
A structure used to describe the keyboard layout and operation
to interpret the keyboard layout. it contains the following
members:
const struct wscons_keydesc *keydesc;
kbd_t layout;
struct wskbddev_attach_args
A structure used to attach the wskbd(4) child device. It has
the following members:
int console;
const struct wskbd_mapdata *keymap;
const struct wskbd_accessops *accessops;
void *accesscookie;
Keymaps
Keymaps are a dense stream of keysym_t. A declaration has the following
fields:
pos [cmd] normal [shift] [altgr] [shift-altgr]
The fields have the following meanings:
pos Always specified as KC(pos) and starts the description
of key pos.
cmd If the command modifier (KS_Cmd_XXX) is active, the
optional command cmd is invoked.
normal The keysym if no modifiers are active.
shift The keysym if the shift modifier is active.
altgr The keysym if the alt-gr modifier is active.
shift-altgr The keysym if the shift-alt-gr modifier is active.
If the keysym after pos is not KS_Cmd_XXX, then cmd is empty. The shift,
altgr and shift-altgr fields are determined from previous fields if they
are not specified. Therefore, there are four valid keysym declarations:
pos [cmd] normal
pos [cmd] normal shift
pos [cmd] normal shift altgr
pos [cmd] normal shift altgr shift-altgr
FUNCTIONS
wskbd_input(kbddev, type, value)
Pass the keypress of value value and type type to wscons key‐
board driver. Valid values of type are:
WSCONS_EVENT_KEY_UP
Key released.
WSCONS_EVENT_KEY_DOWN
Key pressed.
wskbd_rawinput(kbddev, buf, len)
Pass the raw keypress in the buffer buf to the wscons keyboard
driver. The buffer is len bytes long. This function should
only be called if the kernel option WSDISPLAY_COMPAT_RAWKBD is
enabled.
wskbd_cnattach(consops, conscookie, mapdata)
Attach this keyboard as the console input by specifying the con‐
sole operations consops and the keyboard mapping table informa‐
tion in mapdata. The functions specified in consops will be
called with conscookie as the first argument.
wskbd_cndetach()
Detach this keyboard as the console input.
wskbddevprint(aux, pnp)
The default wskbd printing routine used by config_found(). (see
autoconf(9)).
AUTOCONFIGURATION
Keyboard drivers which want to use the wskbd module must be a parent to
the wskbd(4) device and provide an attachment interface. To attach the
wskbd(4) device, the keyboard driver must allocate and populate a
wskbddev_attach_args structure with the supported operations and call‐
backs and call config_found() to perform the attach (see autoconf(9)).
The keymap member points to the wskbd_mapdata structure which describes
the keycode mapping operations. The accessops member points to the
wskbd_accessops structure which describes the keyboard access operations.
The console member is a boolean to indicate to wscons whether this key‐
board will be used for console input.
OPERATION
If the keyboard belongs to the system console, it must register the
wskbd_consops structure specifying the console operations via
wskbd_cnattach() at console attach time.
When a keypress arrives from the keyboard, the keyboard driver must per‐
form any necessary character decoding to wscons events and pass the
events to wscons via wskbd_input(). If the kernel is compiled with the
option WSDISPLAY_COMPAT_RAWKBD, then the keyboard driver must also pass
the raw keyboard data to wscons via wskbd_rawinput().
The wscons framework calls back into the hardware driver by invoking the
functions that are specified in the accessops structure. The enable()
and set_leds() functions are relatively simple and self-explanatory. The
ioctl() function is called by the wscons interface to perform keyboard-
specific ioctl operations (see ioctl(2)). The argument cmd to the
ioctl() function specifies the specific command to perform using the data
data. Valid commands are listed in sys/dev/wscons/wsconsio.h.
CODE REFERENCES
The wscons subsystem is implemented within the directory sys/dev/wscons.
The wskbd module itself is implement within the files
sys/dev/wscons/wskbd.c and sys/dev/wscons/wskbdutil.c. ioctl(2) opera‐
tions are listed in sys/dev/wscons/wsconsio.h.
SEE ALSOioctl(2), autoconf(9), driver(9), intro(9), wsdisplay(9), wsmouse(9)BSD December 20, 2005 BSD