%{help=files}%{+x}
###  %bfiles%b
   Moves you into the file transfer sub-system, if it has been enabled on this
   bot. From there you can browse through the files online and use dcc file
   transfers to download and upload.
%{help=filesys/cancel}%{+x}
###  %bcancel%b <file(s)>
   tells the bot to stop sending a file that is pending (either
   queued, waiting, or in the process of being transferred).

see also: pending
%{help=filesys/cd}%{+x}
###  %bcd%b <directory>
   changes your current directory if possible.  this works exactly
   like the unix command.

see also: pwd
%{help=filesys/cp}%{+j}
###  %bcp%b <source> <dest>
   copies a file or group of files from one place to another.

see also: mv
%{help=filesys/desc}%{+x}
###  %bdesc%b <file> <description>
   changes the description for a file.  if you are a master or
   file janitor, you can change the description for any file.
   otherwise you can only change the descriptions for files you
   have uploaded.

   the description is restricted to 3 lines of 60 characters
   each, and is broken up between words.  you can force a line
   break by putting a '|' in the comment.
%{help=filesys/filestats}%{+j}
###  %bfilestats%b <user>
   Reports on the users upload & download statistics.

###  %bfilestats%b <user> %bclear%b
   Clears a users upload & download statistics.
%{help=filesys/stats}%{+j}
###  %bstats%b
   Reports your upload & download statistics.
%{help=filesys/get}%{+x}
###  %bget%b <filename(s)> [nickname]
   sends you the file(s) requested, over IRC.  you should get a
   DCC SEND notice on IRC, and have your client accept it.  if
   your nickname on IRC is different than the one you use on the
   bot, you should specify a nickname too.  you can also use that
   to send files to other people.  if a file you want is actually
   on another bot, it may take a little bit longer so be patient.
   if that bot isn't on the botnet right now, it will say the file
   isn't available.

   there is a limit to the number of transfers you can have going
   simultaneously, so if you go over this limit, the remainder of
   your file requests will be queued.  as the first files finish
   transferring, the queued files will be sent.

see also: pending, cancel
%{help=filesys/help}%{+x}
%B file system commands:   (wildcard expressions are allowed)
  %bget%b <file> [nick]     send a file over IRC (DCC send)
  %bpending%b               list queued file transfers
  %bcancel%b <file>         cancel a queued file transfer
  %bls%b [filemask]         show list of files in this directory
  %bpwd%b                   display present working directory
  %bcd%b <dir>              change current directory
  %bdesc%b <file> <desc>    set description of <file> to <desc>
  %bstats%b                 see your upload/download statistics
  %bquit%b                  leave the file system
%{+j}
Janitor only:
  %bhide      share     mkdir     cp        rm        lsa%b
  %bunhide    unshare   rmdir     mv        ln        optimize%b
  %bfilestats%b
%{+x}
You can get help on any command via:  %bhelp <command>%b
(To upload a file, just start your dcc transfer.)
%{+n}
As a bot owner, there are a number of setting that can be set to
configure the file area, use %b'.help set <setting>'%b for more info.
Settings:
   %bfiles-path%b        %bincoming-path%b
   %bfiledb-path%b       %bmax-filesize%b
   %bmax-file-users%b    %bupload-to-pwd%b
%{help=filesys/hide}%{+j}
###  %bhide%b <file(s)>
   marks a file as hidden, so that normal users can't see it.
   only a master or file janitor using %b'lsa'%b can see hidden files.

see also: unhide, lsa
%{help=filesys/ln}%{+j}
###  %bln%b <bot:filepath> <localfile>
   creates a link to a file on another bot.  the filepath has to
   be complete, like '/gifs/uglyman.gif'.  if the bot is not
   connected to the botnet, nobody will be able to download the
   file until that bot connects again.  the local filename can be
   anything you want.
   example:  ln Snowbot:/gifs/uglyman.gif ugly.gif

see also: share, unshare, get
%{help=filesys/ls}%{+x}
###  %bls%b [filemask]
   displays the files in the current directory.  subdirectories
   are shown with "<DIR>" next to them, and other files will display
   their size (typically in kilobytes), who uploaded them (and when),
   and how many times each file has been downloaded.  if a description
   of the file exists, it is displayed below the filename.  you can
   restrict the file listing by specifying a mask, just like in unix.

see also: cd, pwd, get
%{help=filesys/lsa}%{+j}
###  %blsa%b [filemask]
   works just like ls, but hidden files are displayed too.
   hidden files are displayed with a "(hid)" next to them, and
   shared files are displayed with a "(shr)" next to them.

see also: hide, share
%{help=filesys/mkdir}%{+j}
###  %bmkdir%b <dir> [flags [channel]]
   creates a subdirectory from this one, with the given name.  if
   flags are specified, then those flags are required to enter or
   even see the directory.  you can even specify a channel that the
   flags are matched against. you can use the %b'mkdir'%b command again
   to alter or remove those flags.

see also: rmdir
%{help=filesys/mv}%{+j}
###  %bmv%b <source> <dest>
   moves a file or group of files from one place to another.  (it
   can also be used to rename files.)

see also: cp
%{help=filesys/pending}%{+x}
###  %bpending%b
   gives you a listing of every file you've requested which is
   still waiting, queued, or in the process of transferring.
   it shows you the nickname on IRC that the file is being sent
   to, and, if the transfer is in progress, tells you how far
   along the transfer is.

see also: cancel
%{help=filesys/pwd}%{+x}
###  %bpwd%b
   tells you what your current directory is.

see also: cd
%{help=filesys/quit}%{+x}
###  %bquit%b
   exits the file system
%{help=filesys/rm}%{+j}
###  %brm%b <file(s)>
   erase a file for good.
%{help=filesys/rmdir}%{+j}
###  %brmdir%b <dir>
   removes an existing directory, if there are no files in it.

see also: mkdir
%{help=filesys/share}%{+j}
###  %bshare%b <file(s)>
   marks a file as shared.  this means that other bots can get
   the file remotely for users on their file systems.  by default,
   files are marked as unshared.

see also: unshare, lsa, ln
%{help=filesys/optimize}%{+j}
###  %boptimize%b
   cleans up the current directory's database.  if you have a large
   directory with many files you may want to use this command if
   you experience slow-downs/delays over time.  normally, the db
   should clean up itsself though.
%{help=filesys/sort}%{+j}
###  %bsort%b
   this command is obsolete, because the directory is always
   sorted on the fly.
%{help=filesys/unhide}%{+j}
###  %bunhide%b <file(s)>
   makes a file be not hidden any more.

see also: hide, lsa
%{help=filesys/unshare}%{+j}
###  %bunshare%b <file(s)>
   removes the shared tag from a file.

see also: share, lsa, ln
%{help=filesys module}%{+n}
### %bfilesys module%b
   This module provides an area within the bot where users can store and
   manage files. With this module, the bot is usable as a file server.

   The following commands are provided by the filesys module:

   For filesystem users:
      %bfiles%b
%{help=all}%{+x}
###  %bfilesys module%b commands
   For filesystem users:
      %bfiles%b