Django’s serialization framework provides a mechanism for “translating” Django models into other formats. Usually these other formats will be text-based and used for sending Django data over a wire, but it’s possible for a serializer to handle any format (text-based or not).
See also
If you just want to get some data from your tables into a serialized
form, you could use the dumpdata management command.
At the highest level, serializing data is a very simple operation:
from django.core import serializers
data = serializers.serialize("xml", SomeModel.objects.all())
The arguments to the serialize function are the format to serialize the data
to (see Serialization formats) and a
QuerySet to serialize. (Actually, the second
argument can be any iterator that yields Django model instances, but it’ll
almost always be a QuerySet).
django.core.serializers.get_serializer(format)¶You can also use a serializer object directly:
XMLSerializer = serializers.get_serializer("xml")
xml_serializer = XMLSerializer()
xml_serializer.serialize(queryset)
data = xml_serializer.getvalue()
This is useful if you want to serialize data directly to a file-like object
(which includes an HttpResponse):
with open("file.xml", "w") as out:
xml_serializer.serialize(SomeModel.objects.all(), stream=out)
Note
Calling get_serializer() with an unknown
format will raise a
django.core.serializers.SerializerDoesNotExist exception.
If you only want a subset of fields to be serialized, you can
specify a fields argument to the serializer:
from django.core import serializers
data = serializers.serialize('xml', SomeModel.objects.all(), fields=('name','size'))
In this example, only the name and size attributes of each model will
be serialized. The primary key is always serialized as the pk element in the
resulting output; it never appears in the fields part.
Note
Depending on your model, you may find that it is not possible to deserialize a model that only serializes a subset of its fields. If a serialized object doesn’t specify all the fields that are required by a model, the deserializer will not be able to save deserialized instances.
If you have a model that is defined using an abstract base class, you don’t have to do anything special to serialize that model. Just call the serializer on the object (or objects) that you want to serialize, and the output will be a complete representation of the serialized object.
However, if you have a model that uses multi-table inheritance, you also need to serialize all of the base classes for the model. This is because only the fields that are locally defined on the model will be serialized. For example, consider the following models:
class Place(models.Model):
name = models.CharField(max_length=50)
class Restaurant(Place):
serves_hot_dogs = models.BooleanField(default=False)
If you only serialize the Restaurant model:
data = serializers.serialize('xml', Restaurant.objects.all())
the fields on the serialized output will only contain the serves_hot_dogs
attribute. The name attribute of the base class will be ignored.
In order to fully serialize your Restaurant instances, you will need to
serialize the Place models as well:
all_objects = list(Restaurant.objects.all()) + list(Place.objects.all())
data = serializers.serialize('xml', all_objects)
Deserializing data is also a fairly simple operation:
for obj in serializers.deserialize("xml", data):
do_something_with(obj)
As you can see, the deserialize function takes the same format argument as
serialize, a string or stream of data, and returns an iterator.
However, here it gets slightly complicated. The objects returned by the
deserialize iterator aren’t simple Django objects. Instead, they are
special DeserializedObject instances that wrap a created – but unsaved –
object and any associated relationship data.
Calling DeserializedObject.save() saves the object to the database.
Note
If the pk attribute in the serialized data doesn’t exist or is
null, a new instance will be saved to the database.
This ensures that deserializing is a non-destructive operation even if the
data in your serialized representation doesn’t match what’s currently in the
database. Usually, working with these DeserializedObject instances looks
something like:
for deserialized_object in serializers.deserialize("xml", data):
if object_should_be_saved(deserialized_object):
deserialized_object.save()
In other words, the usual use is to examine the deserialized objects to make sure that they are “appropriate” for saving before doing so. Of course, if you trust your data source you could just save the object and move on.
The Django object itself can be inspected as deserialized_object.object.
If fields in the serialized data do not exist on a model, a
DeserializationError will be raised unless the ignorenonexistent
argument is passed in as True:
serializers.deserialize("xml", data, ignorenonexistent=True)
Django supports a number of serialization formats, some of which require you to install third-party Python modules:
| Identifier | Information |
|---|---|
xml |
Serializes to and from a simple XML dialect. |
json |
Serializes to and from JSON. |
yaml |
Serializes to YAML (YAML Ain’t a Markup Language). This serializer is only available if PyYAML is installed. |
The basic XML serialization format is quite simple:
<?xml version="1.0" encoding="utf-8"?>
<django-objects version="1.0">
<object pk="123" model="sessions.session">
<field type="DateTimeField" name="expire_date">2013-01-16T08:16:59.844560+00:00</field>
<!-- ... -->
</object>
</django-objects>
The whole collection of objects that is either serialized or de-serialized is
represented by a <django-objects>-tag which contains multiple
<object>-elements. Each such object has two attributes: “pk” and “model”,
the latter being represented by the name of the app (“sessions”) and the
lowercase name of the model (“session”) separated by a dot.
Each field of the object is serialized as a <field>-element sporting the
fields “type” and “name”. The text content of the element represents the value
that should be stored.
Foreign keys and other relational fields are treated a little bit differently:
<object pk="27" model="auth.permission">
<!-- ... -->
<field to="contenttypes.contenttype" name="content_type" rel="ManyToOneRel">9</field>
<!-- ... -->
</object>
In this example we specify that the auth.Permission object with the PK 27 has a foreign key to the contenttypes.ContentType instance with the PK 9.
ManyToMany-relations are exported for the model that binds them. For instance, the auth.User model has such a relation to the auth.Permission model:
<object pk="1" model="auth.user">
<!-- ... -->
<field to="auth.permission" name="user_permissions" rel="ManyToManyRel">
<object pk="46"></object>
<object pk="47"></object>
</field>
</object>
This example links the given user with the permission models with PKs 46 and 47.
Control characters
If the content to be serialized contains control characters that are not
accepted in the XML 1.0 standard, the serialization will fail with a
ValueError exception. Read also the W3C’s explanation of HTML,
XHTML, XML and Control Codes.
When staying with the same example data as before it would be serialized as JSON in the following way:
[
{
"pk": "4b678b301dfd8a4e0dad910de3ae245b",
"model": "sessions.session",
"fields": {
"expire_date": "2013-01-16T08:16:59.844Z",
...
}
}
]
The formatting here is a bit simpler than with XML. The whole collection is just represented as an array and the objects are represented by JSON objects with three properties: “pk”, “model” and “fields”. “fields” is again an object containing each field’s name and value as property and property-value respectively.
Foreign keys just have the PK of the linked object as property value. ManyToMany-relations are serialized for the model that defines them and are represented as a list of PKs.
Be aware that not all Django output can be passed unmodified to json.
For example, if you have some custom type in an object to be serialized, you’ll
have to write a custom json encoder for it. Something like this will
work:
from django.utils.encoding import force_text
from django.core.serializers.json import DjangoJSONEncoder
class LazyEncoder(DjangoJSONEncoder):
def default(self, obj):
if isinstance(obj, YourCustomType):
return force_text(obj)
return super(LazyEncoder, self).default(obj)
You can then pass cls=LazyEncoder to the serializers.serialize()
function:
from django.core.serializers import serialize
serialize('json', SomeModel.objects.all(), cls=LazyEncoder)
The ability to use a custom encoder using cls=... was added.
Also note that GeoDjango provides a customized GeoJSON serializer.
DjangoJSONEncoder¶django.core.serializers.json.DjangoJSONEncoder¶The JSON serializer uses DjangoJSONEncoder for encoding. A subclass of
JSONEncoder, it handles these additional types:
datetimeYYYY-MM-DDTHH:mm:ss.sssZ or
YYYY-MM-DDTHH:mm:ss.sss+HH:MM as defined in ECMA-262.dateYYYY-MM-DD as defined in ECMA-262.timeHH:MM:ss.sss as defined in ECMA-262.timedeltatimedelta(days=1, hours=2, seconds=3.4) is represented as
'P1DT02H00M03.400000S'.Decimal, Promise (django.utils.functional.lazy() objects), UUIDSupport for Promise was added.
Support for timedelta was added.
YAML serialization looks quite similar to JSON. The object list is serialized as a sequence mappings with the keys “pk”, “model” and “fields”. Each field is again a mapping with the key being name of the field and the value the value:
- fields: {expire_date: !!timestamp '2013-01-16 08:16:59.844560+00:00'}
model: sessions.session
pk: 4b678b301dfd8a4e0dad910de3ae245b
Referential fields are again just represented by the PK or sequence of PKs.
The default serialization strategy for foreign keys and many-to-many relations is to serialize the value of the primary key(s) of the objects in the relation. This strategy works well for most objects, but it can cause difficulty in some circumstances.
Consider the case of a list of objects that have a foreign key referencing
ContentType. If you’re going to
serialize an object that refers to a content type, then you need to have a way
to refer to that content type to begin with. Since ContentType objects are
automatically created by Django during the database synchronization process,
the primary key of a given content type isn’t easy to predict; it will
depend on how and when migrate was executed. This is true for all
models which automatically generate objects, notably including
Permission,
Group, and
User.
Warning
You should never include automatically generated objects in a fixture or
other serialized data. By chance, the primary keys in the fixture
may match those in the database and loading the fixture will
have no effect. In the more likely case that they don’t match, the fixture
loading will fail with an IntegrityError.
There is also the matter of convenience. An integer id isn’t always the most convenient way to refer to an object; sometimes, a more natural reference would be helpful.
It is for these reasons that Django provides natural keys. A natural key is a tuple of values that can be used to uniquely identify an object instance without using the primary key value.
Consider the following two models:
from django.db import models
class Person(models.Model):
first_name = models.CharField(max_length=100)
last_name = models.CharField(max_length=100)
birthdate = models.DateField()
class Meta:
unique_together = (('first_name', 'last_name'),)
class Book(models.Model):
name = models.CharField(max_length=100)
author = models.ForeignKey(Person, on_delete=models.CASCADE)
Ordinarily, serialized data for Book would use an integer to refer to
the author. For example, in JSON, a Book might be serialized as:
...
{
"pk": 1,
"model": "store.book",
"fields": {
"name": "Mostly Harmless",
"author": 42
}
}
...
This isn’t a particularly natural way to refer to an author. It requires that you know the primary key value for the author; it also requires that this primary key value is stable and predictable.
However, if we add natural key handling to Person, the fixture becomes
much more humane. To add natural key handling, you define a default
Manager for Person with a get_by_natural_key() method. In the case
of a Person, a good natural key might be the pair of first and last
name:
from django.db import models
class PersonManager(models.Manager):
def get_by_natural_key(self, first_name, last_name):
return self.get(first_name=first_name, last_name=last_name)
class Person(models.Model):
objects = PersonManager()
first_name = models.CharField(max_length=100)
last_name = models.CharField(max_length=100)
birthdate = models.DateField()
class Meta:
unique_together = (('first_name', 'last_name'),)
Now books can use that natural key to refer to Person objects:
...
{
"pk": 1,
"model": "store.book",
"fields": {
"name": "Mostly Harmless",
"author": ["Douglas", "Adams"]
}
}
...
When you try to load this serialized data, Django will use the
get_by_natural_key() method to resolve ["Douglas", "Adams"]
into the primary key of an actual Person object.
Note
Whatever fields you use for a natural key must be able to uniquely
identify an object. This will usually mean that your model will
have a uniqueness clause (either unique=True on a single field, or
unique_together over multiple fields) for the field or fields
in your natural key. However, uniqueness doesn’t need to be
enforced at the database level. If you are certain that a set of
fields will be effectively unique, you can still use those fields
as a natural key.
Deserialization of objects with no primary key will always check whether the
model’s manager has a get_by_natural_key() method and if so, use it to
populate the deserialized object’s primary key.
So how do you get Django to emit a natural key when serializing an object? Firstly, you need to add another method – this time to the model itself:
class Person(models.Model):
objects = PersonManager()
first_name = models.CharField(max_length=100)
last_name = models.CharField(max_length=100)
birthdate = models.DateField()
def natural_key(self):
return (self.first_name, self.last_name)
class Meta:
unique_together = (('first_name', 'last_name'),)
That method should always return a natural key tuple – in this
example, (first name, last name). Then, when you call
serializers.serialize(), you provide use_natural_foreign_keys=True
or use_natural_primary_keys=True arguments:
>>> serializers.serialize('json', [book1, book2], indent=2,
... use_natural_foreign_keys=True, use_natural_primary_keys=True)
When use_natural_foreign_keys=True is specified, Django will use the
natural_key() method to serialize any foreign key reference to objects
of the type that defines the method.
When use_natural_primary_keys=True is specified, Django will not provide the
primary key in the serialized data of this object since it can be calculated
during deserialization:
...
{
"model": "store.person",
"fields": {
"first_name": "Douglas",
"last_name": "Adams",
"birth_date": "1952-03-11",
}
}
...
This can be useful when you need to load serialized data into an existing database and you cannot guarantee that the serialized primary key value is not already in use, and do not need to ensure that deserialized objects retain the same primary keys.
If you are using dumpdata to generate serialized data, use the
dumpdata --natural-foreign and dumpdata --natural-primary
command line flags to generate natural keys.
Note
You don’t need to define both natural_key() and
get_by_natural_key(). If you don’t want Django to output
natural keys during serialization, but you want to retain the
ability to load natural keys, then you can opt to not implement
the natural_key() method.
Conversely, if (for some strange reason) you want Django to output
natural keys during serialization, but not be able to load those
key values, just don’t define the get_by_natural_key() method.
Since natural keys rely on database lookups to resolve references, it is important that the data exists before it is referenced. You can’t make a “forward reference” with natural keys – the data you’re referencing must exist before you include a natural key reference to that data.
To accommodate this limitation, calls to dumpdata that use
the dumpdata --natural-foreign option will serialize any model with a
natural_key() method before serializing standard primary key objects.
However, this may not always be enough. If your natural key refers to another object (by using a foreign key or natural key to another object as part of a natural key), then you need to be able to ensure that the objects on which a natural key depends occur in the serialized data before the natural key requires them.
To control this ordering, you can define dependencies on your
natural_key() methods. You do this by setting a dependencies
attribute on the natural_key() method itself.
For example, let’s add a natural key to the Book model from the
example above:
class Book(models.Model):
name = models.CharField(max_length=100)
author = models.ForeignKey(Person, on_delete=models.CASCADE)
def natural_key(self):
return (self.name,) + self.author.natural_key()
The natural key for a Book is a combination of its name and its
author. This means that Person must be serialized before Book.
To define this dependency, we add one extra line:
def natural_key(self):
return (self.name,) + self.author.natural_key()
natural_key.dependencies = ['example_app.person']
This definition ensures that all Person objects are serialized before
any Book objects. In turn, any object referencing Book will be
serialized after both Person and Book have been serialized.
Jun 14, 2020