Translation

Overview

In order to make a Django project translatable, you have to add a minimal number of hooks to your Python code and templates. These hooks are called translation strings. They tell Django: “This text should be translated into the end user’s language, if a translation for this text is available in that language.” It’s your responsibility to mark translatable strings; the system can only translate strings it knows about.

Django then provides utilities to extract the translation strings into a message file. This file is a convenient way for translators to provide the equivalent of the translation strings in the target language. Once the translators have filled in the message file, it must be compiled. This process relies on the GNU gettext toolset.

Once this is done, Django takes care of translating Web apps on the fly in each available language, according to users’ language preferences.

Django’s internationalization hooks are on by default, and that means there’s a bit of i18n-related overhead in certain places of the framework. If you don’t use internationalization, you should take the two seconds to set USE_I18N = False in your settings file. Then Django will make some optimizations so as not to load the internationalization machinery.

Note

There is also an independent but related USE_L10N setting that controls if Django should implement format localization. See Format localization for more details.

Note

Make sure you’ve activated translation for your project (the fastest way is to check if MIDDLEWARE includes django.middleware.locale.LocaleMiddleware). If you haven’t yet, see How Django discovers language preference.

Internationalization: in Python code

Standard translation

Specify a translation string by using the function ugettext(). It’s convention to import this as a shorter alias, _, to save typing.

Note

Python’s standard library gettext module installs _() into the global namespace, as an alias for gettext(). In Django, we have chosen not to follow this practice, for a couple of reasons:

  1. For international character set (Unicode) support, ugettext() is more useful than gettext(). Sometimes, you should be using ugettext_lazy() as the default translation method for a particular file. Without _() in the global namespace, the developer has to think about which is the most appropriate translation function.
  2. The underscore character (_) is used to represent “the previous result” in Python’s interactive shell and doctest tests. Installing a global _() function causes interference. Explicitly importing ugettext() as _() avoids this problem.

What functions may be aliased as _?

Because of how xgettext (used by makemessages) works, only functions that take a single string argument can be imported as _:

In this example, the text "Welcome to my site." is marked as a translation string:

from django.utils.translation import ugettext as _
from django.http import HttpResponse

def my_view(request):
    output = _("Welcome to my site.")
    return HttpResponse(output)

Obviously, you could code this without using the alias. This example is identical to the previous one:

from django.utils.translation import ugettext
from django.http import HttpResponse

def my_view(request):
    output = ugettext("Welcome to my site.")
    return HttpResponse(output)

Translation works on computed values. This example is identical to the previous two:

def my_view(request):
    words = ['Welcome', 'to', 'my', 'site.']
    output = _(' '.join(words))
    return HttpResponse(output)

Translation works on variables. Again, here’s an identical example:

def my_view(request):
    sentence = 'Welcome to my site.'
    output = _(sentence)
    return HttpResponse(output)

(The caveat with using variables or computed values, as in the previous two examples, is that Django’s translation-string-detecting utility, django-admin makemessages, won’t be able to find these strings. More on makemessages later.)

The strings you pass to _() or ugettext() can take placeholders, specified with Python’s standard named-string interpolation syntax. Example:

def my_view(request, m, d):
    output = _('Today is %(month)s %(day)s.') % {'month': m, 'day': d}
    return HttpResponse(output)

This technique lets language-specific translations reorder the placeholder text. For example, an English translation may be "Today is November 26.", while a Spanish translation may be "Hoy es 26 de Noviembre." – with the month and the day placeholders swapped.

For this reason, you should use named-string interpolation (e.g., %(day)s) instead of positional interpolation (e.g., %s or %d) whenever you have more than a single parameter. If you used positional interpolation, translations wouldn’t be able to reorder placeholder text.

Comments for translators

If you would like to give translators hints about a translatable string, you can add a comment prefixed with the Translators keyword on the line preceding the string, e.g.:

def my_view(request):
    # Translators: This message appears on the home page only
    output = ugettext("Welcome to my site.")

The comment will then appear in the resulting .po file associated with the translatable construct located below it and should also be displayed by most translation tools.

Note

Just for completeness, this is the corresponding fragment of the resulting .po file:

#. Translators: This message appears on the home page only
# path/to/python/file.py:123
msgid "Welcome to my site."
msgstr ""

This also works in templates. See Comments for translators in templates for more details.

Marking strings as no-op

Use the function django.utils.translation.ugettext_noop() to mark a string as a translation string without translating it. The string is later translated from a variable.

Use this if you have constant strings that should be stored in the source language because they are exchanged over systems or users – such as strings in a database – but should be translated at the last possible point in time, such as when the string is presented to the user.

Pluralization

Use the function django.utils.translation.ungettext() to specify pluralized messages.

ungettext takes three arguments: the singular translation string, the plural translation string and the number of objects.

This function is useful when you need your Django application to be localizable to languages where the number and complexity of plural forms is greater than the two forms used in English (‘object’ for the singular and ‘objects’ for all the cases where count is different from one, irrespective of its value.)

For example:

from django.utils.translation import ungettext
from django.http import HttpResponse

def hello_world(request, count):
    page = ungettext(
        'there is %(count)d object',
        'there are %(count)d objects',
    count) % {
        'count': count,
    }
    return HttpResponse(page)

In this example the number of objects is passed to the translation languages as the count variable.

Note that pluralization is complicated and works differently in each language. Comparing count to 1 isn’t always the correct rule. This code looks sophisticated, but will produce incorrect results for some languages:

from django.utils.translation import ungettext
from myapp.models import Report

count = Report.objects.count()
if count == 1:
    name = Report._meta.verbose_name
else:
    name = Report._meta.verbose_name_plural

text = ungettext(
    'There is %(count)d %(name)s available.',
    'There are %(count)d %(name)s available.',
    count
) % {
    'count': count,
    'name': name
}

Don’t try to implement your own singular-or-plural logic, it won’t be correct. In a case like this, consider something like the following:

text = ungettext(
    'There is %(count)d %(name)s object available.',
    'There are %(count)d %(name)s objects available.',
    count
) % {
    'count': count,
    'name': Report._meta.verbose_name,
}

Note

When using ungettext(), make sure you use a single name for every extrapolated variable included in the literal. In the examples above, note how we used the name Python variable in both translation strings. This example, besides being incorrect in some languages as noted above, would fail:

text = ungettext(
    'There is %(count)d %(name)s available.',
    'There are %(count)d %(plural_name)s available.',
    count
) % {
    'count': Report.objects.count(),
    'name': Report._meta.verbose_name,
    'plural_name': Report._meta.verbose_name_plural
}

You would get an error when running django-admin compilemessages:

a format specification for argument 'name', as in 'msgstr[0]', doesn't exist in 'msgid'

Note

Plural form and po files

Django does not support custom plural equations in po files. As all translation catalogs are merged, only the plural form for the main Django po file (in django/conf/locale/<lang_code>/LC_MESSAGES/django.po) is considered. Plural forms in all other po files are ignored. Therefore, you should not use different plural equations in your project or application po files.

Contextual markers

Sometimes words have several meanings, such as "May" in English, which refers to a month name and to a verb. To enable translators to translate these words correctly in different contexts, you can use the django.utils.translation.pgettext() function, or the django.utils.translation.npgettext() function if the string needs pluralization. Both take a context string as the first variable.

In the resulting .po file, the string will then appear as often as there are different contextual markers for the same string (the context will appear on the msgctxt line), allowing the translator to give a different translation for each of them.

For example:

from django.utils.translation import pgettext

month = pgettext("month name", "May")

or:

from django.db import models
from django.utils.translation import pgettext_lazy

class MyThing(models.Model):
    name = models.CharField(help_text=pgettext_lazy(
        'help text for MyThing model', 'This is the help text'))

will appear in the .po file as:

msgctxt "month name"
msgid "May"
msgstr ""

Contextual markers are also supported by the trans and blocktrans template tags.

Lazy translation

Use the lazy versions of translation functions in django.utils.translation (easily recognizable by the lazy suffix in their names) to translate strings lazily – when the value is accessed rather than when they’re called.

These functions store a lazy reference to the string – not the actual translation. The translation itself will be done when the string is used in a string context, such as in template rendering.

This is essential when calls to these functions are located in code paths that are executed at module load time.

This is something that can easily happen when defining models, forms and model forms, because Django implements these such that their fields are actually class-level attributes. For that reason, make sure to use lazy translations in the following cases:

Model fields and relationships verbose_name and help_text option values

For example, to translate the help text of the name field in the following model, do the following:

from django.db import models
from django.utils.translation import ugettext_lazy as _

class MyThing(models.Model):
    name = models.CharField(help_text=_('This is the help text'))

You can mark names of ForeignKey, ManyToManyField or OneToOneField relationship as translatable by using their verbose_name options:

class MyThing(models.Model):
    kind = models.ForeignKey(
        ThingKind,
        on_delete=models.CASCADE,
        related_name='kinds',
        verbose_name=_('kind'),
    )

Just like you would do in verbose_name you should provide a lowercase verbose name text for the relation as Django will automatically titlecase it when required.

Model verbose names values

It is recommended to always provide explicit verbose_name and verbose_name_plural options rather than relying on the fallback English-centric and somewhat naïve determination of verbose names Django performs by looking at the model’s class name:

from django.db import models
from django.utils.translation import ugettext_lazy as _

class MyThing(models.Model):
    name = models.CharField(_('name'), help_text=_('This is the help text'))

    class Meta:
        verbose_name = _('my thing')
        verbose_name_plural = _('my things')

Model methods short_description attribute values

For model methods, you can provide translations to Django and the admin site with the short_description attribute:

from django.db import models
from django.utils.translation import ugettext_lazy as _

class MyThing(models.Model):
    kind = models.ForeignKey(
        ThingKind,
        on_delete=models.CASCADE,
        related_name='kinds',
        verbose_name=_('kind'),
    )

    def is_mouse(self):
        return self.kind.type == MOUSE_TYPE
    is_mouse.short_description = _('Is it a mouse?')

Working with lazy translation objects

The result of a ugettext_lazy() call can be used wherever you would use a unicode string (a str object) in other Django code, but it may not work with arbitrary Python code. For example, the following won’t work because the requests library doesn’t handle ugettext_lazy objects:

body = ugettext_lazy("I \u2764 Django")  # (unicode :heart:)
requests.post('https://example.com/send', data={'body': body})

You can avoid such problems by casting ugettext_lazy() objects to text strings before passing them to non-Django code:

requests.post('https://example.com/send', data={'body': str(body)})

Use unicode in place of str on Python 2, or six.text_type to support Python 2 and 3.

If you try to use a ugettext_lazy() result where a bytestring (a bytes object) is expected, things won’t work as expected since a ugettext_lazy() object doesn’t know how to convert itself to a bytestring. You can’t use a unicode string inside a bytestring, either, so this is consistent with normal Python behavior. For example, putting a unicode proxy into a unicode string is fine:

"Hello %s" % ugettext_lazy("people")

But you can’t insert a unicode object into a bytestring and nor can you insert a unicode proxy there:

b"Hello %s" % ugettext_lazy("people")

If you ever see output that looks like "hello <django.utils.functional...>", you have tried to insert the result of ugettext_lazy() into a bytestring. That’s a bug in your code.

If you don’t like the long ugettext_lazy name, you can just alias it as _ (underscore), like so:

from django.db import models
from django.utils.translation import ugettext_lazy as _

class MyThing(models.Model):
    name = models.CharField(help_text=_('This is the help text'))

Using ugettext_lazy() and ungettext_lazy() to mark strings in models and utility functions is a common operation. When you’re working with these objects elsewhere in your code, you should ensure that you don’t accidentally convert them to strings, because they should be converted as late as possible (so that the correct locale is in effect). This necessitates the use of the helper function described next.

Lazy translations and plural

When using lazy translation for a plural string ([u]n[p]gettext_lazy), you generally don’t know the number argument at the time of the string definition. Therefore, you are authorized to pass a key name instead of an integer as the number argument. Then number will be looked up in the dictionary under that key during string interpolation. Here’s example:

from django import forms
from django.utils.translation import ungettext_lazy

class MyForm(forms.Form):
    error_message = ungettext_lazy("You only provided %(num)d argument",
        "You only provided %(num)d arguments", 'num')

    def clean(self):
        # ...
        if error:
            raise forms.ValidationError(self.error_message % {'num': number})

If the string contains exactly one unnamed placeholder, you can interpolate directly with the number argument:

class MyForm(forms.Form):
    error_message = ungettext_lazy(
        "You provided %d argument",
        "You provided %d arguments",
    )

    def clean(self):
        # ...
        if error:
            raise forms.ValidationError(self.error_message % number)

Formatting strings: format_lazy()

Python’s str.format() method will not work when either the format_string or any of the arguments to str.format() contains lazy translation objects. Instead, you can use django.utils.text.format_lazy(), which creates a lazy object that runs the str.format() method only when the result is included in a string. For example:

from django.utils.text import format_lazy
from django.utils.translation import ugettext_lazy
...
name = ugettext_lazy('John Lennon')
instrument = ugettext_lazy('guitar')
result = format_lazy('{name}: {instrument}', name=name, instrument=instrument)

In this case, the lazy translations in result will only be converted to strings when result itself is used in a string (usually at template rendering time).

Other uses of lazy in delayed translations

For any other case where you would like to delay the translation, but have to pass the translatable string as argument to another function, you can wrap this function inside a lazy call yourself. For example:

from django.utils import six  # Python 3 compatibility
from django.utils.functional import lazy
from django.utils.safestring import mark_safe
from django.utils.translation import ugettext_lazy as _

mark_safe_lazy = lazy(mark_safe, six.text_type)

And then later:

lazy_string = mark_safe_lazy(_("<p>My <strong>string!</strong></p>"))

Localized names of languages

get_language_info()[source]

The get_language_info() function provides detailed information about languages:

>>> from django.utils.translation import activate, get_language_info
>>> activate('fr')
>>> li = get_language_info('de')
>>> print(li['name'], li['name_local'], li['name_translated'], li['bidi'])
German Deutsch Allemand False

The name, name_local, and name_translated attributes of the dictionary contain the name of the language in English, in the language itself, and in your current active language respectively. The bidi attribute is True only for bi-directional languages.

The source of the language information is the django.conf.locale module. Similar access to this information is available for template code. See below.

Internationalization: in template code

Translations in Django templates uses two template tags and a slightly different syntax than in Python code. To give your template access to these tags, put {% load i18n %} toward the top of your template. As with all template tags, this tag needs to be loaded in all templates which use translations, even those templates that extend from other templates which have already loaded the i18n tag.

trans template tag

The {% trans %} template tag translates either a constant string (enclosed in single or double quotes) or variable content:

<title>{% trans "This is the title." %}</title>
<title>{% trans myvar %}</title>

If the noop option is present, variable lookup still takes place but the translation is skipped. This is useful when “stubbing out” content that will require translation in the future:

<title>{% trans "myvar" noop %}</title>

Internally, inline translations use an ugettext() call.

In case a template var (myvar above) is passed to the tag, the tag will first resolve such variable to a string at run-time and then look up that string in the message catalogs.

It’s not possible to mix a template variable inside a string within {% trans %}. If your translations require strings with variables (placeholders), use {% blocktrans %} instead.

If you’d like to retrieve a translated string without displaying it, you can use the following syntax:

{% trans "This is the title" as the_title %}

<title>{{ the_title }}</title>
<meta name="description" content="{{ the_title }}">

In practice you’ll use this to get a string you can use in multiple places in a template or so you can use the output as an argument for other template tags or filters:

{% trans "starting point" as start %}
{% trans "end point" as end %}
{% trans "La Grande Boucle" as race %}

<h1>
  <a href="/" title="{% blocktrans %}Back to '{{ race }}' homepage{% endblocktrans %}">{{ race }}</a>
</h1>
<p>
{% for stage in tour_stages %}
    {% cycle start end %}: {{ stage }}{% if forloop.counter|divisibleby:2 %}<br />{% else %}, {% endif %}
{% endfor %}
</p>

{% trans %} also supports contextual markers using the context keyword:

{% trans "May" context "month name" %}

blocktrans template tag

Contrarily to the trans tag, the blocktrans tag allows you to mark complex sentences consisting of literals and variable content for translation by making use of placeholders:

{% blocktrans %}This string will have {{ value }} inside.{% endblocktrans %}

To translate a template expression – say, accessing object attributes or using template filters – you need to bind the expression to a local variable for use within the translation block. Examples:

{% blocktrans with amount=article.price %}
That will cost $ {{ amount }}.
{% endblocktrans %}

{% blocktrans with myvar=value|filter %}
This will have {{ myvar }} inside.
{% endblocktrans %}

You can use multiple expressions inside a single blocktrans tag:

{% blocktrans with book_t=book|title author_t=author|title %}
This is {{ book_t }} by {{ author_t }}
{% endblocktrans %}

Note

The previous more verbose format is still supported: {% blocktrans with book|title as book_t and author|title as author_t %}

Other block tags (for example {% for %} or {% if %}) are not allowed inside a blocktrans tag.

If resolving one of the block arguments fails, blocktrans will fall back to the default language by deactivating the currently active language temporarily with the deactivate_all() function.

This tag also provides for pluralization. To use it:

  • Designate and bind a counter value with the name count. This value will be the one used to select the right plural form.
  • Specify both the singular and plural forms separating them with the {% plural %} tag within the {% blocktrans %} and {% endblocktrans %} tags.

An example:

{% blocktrans count counter=list|length %}
There is only one {{ name }} object.
{% plural %}
There are {{ counter }} {{ name }} objects.
{% endblocktrans %}

A more complex example:

{% blocktrans with amount=article.price count years=i.length %}
That will cost $ {{ amount }} per year.
{% plural %}
That will cost $ {{ amount }} per {{ years }} years.
{% endblocktrans %}

When you use both the pluralization feature and bind values to local variables in addition to the counter value, keep in mind that the blocktrans construct is internally converted to an ungettext call. This means the same notes regarding ungettext variables apply.

Reverse URL lookups cannot be carried out within the blocktrans and should be retrieved (and stored) beforehand:

{% url 'path.to.view' arg arg2 as the_url %}
{% blocktrans %}
This is a URL: {{ the_url }}
{% endblocktrans %}

If you’d like to retrieve a translated string without displaying it, you can use the following syntax:

{% blocktrans asvar the_title %}The title is {{ title }}.{% endblocktrans %}
<title>{{ the_title }}</title>
<meta name="description" content="{{ the_title }}">

In practice you’ll use this to get a string you can use in multiple places in a template or so you can use the output as an argument for other template tags or filters.

{% blocktrans %} also supports contextual markers using the context keyword:

{% blocktrans with name=user.username context "greeting" %}Hi {{ name }}{% endblocktrans %}

Another feature {% blocktrans %} supports is the trimmed option. This option will remove newline characters from the beginning and the end of the content of the {% blocktrans %} tag, replace any whitespace at the beginning and end of a line and merge all lines into one using a space character to separate them. This is quite useful for indenting the content of a {% blocktrans %} tag without having the indentation characters end up in the corresponding entry in the PO file, which makes the translation process easier.

For instance, the following {% blocktrans %} tag:

{% blocktrans trimmed %}
  First sentence.
  Second paragraph.
{% endblocktrans %}

will result in the entry "First sentence. Second paragraph." in the PO file, compared to "\n  First sentence.\n  Second sentence.\n", if the trimmed option had not been specified.

String literals passed to tags and filters

You can translate string literals passed as arguments to tags and filters by using the familiar _() syntax:

{% some_tag _("Page not found") value|yesno:_("yes,no") %}

In this case, both the tag and the filter will see the translated string, so they don’t need to be aware of translations.

Note

In this example, the translation infrastructure will be passed the string "yes,no", not the individual strings "yes" and "no". The translated string will need to contain the comma so that the filter parsing code knows how to split up the arguments. For example, a German translator might translate the string "yes,no" as "ja,nein" (keeping the comma intact).

Comments for translators in templates

Just like with Python code, these notes for translators can be specified using comments, either with the comment tag:

{% comment %}Translators: View verb{% endcomment %}
{% trans "View" %}

{% comment %}Translators: Short intro blurb{% endcomment %}
<p>{% blocktrans %}A multiline translatable
literal.{% endblocktrans %}</p>

or with the {# … #} one-line comment constructs:

{# Translators: Label of a button that triggers search #}
<button type="submit">{% trans "Go" %}</button>

{# Translators: This is a text of the base template #}
{% blocktrans %}Ambiguous translatable block of text{% endblocktrans %}

Note

Just for completeness, these are the corresponding fragments of the resulting .po file:

#. Translators: View verb
# path/to/template/file.html:10
msgid "View"
msgstr ""

#. Translators: Short intro blurb
# path/to/template/file.html:13
msgid ""
"A multiline translatable"
"literal."
msgstr ""

# ...

#. Translators: Label of a button that triggers search
# path/to/template/file.html:100
msgid "Go"
msgstr ""

#. Translators: This is a text of the base template
# path/to/template/file.html:103
msgid "Ambiguous translatable block of text"
msgstr ""

Switching language in templates

If you want to select a language within a template, you can use the language template tag:

{% load i18n %}

{% get_current_language as LANGUAGE_CODE %}
<!-- Current language: {{ LANGUAGE_CODE }} -->
<p>{% trans "Welcome to our page" %}</p>

{% language 'en' %}
    {% get_current_language as LANGUAGE_CODE %}
    <!-- Current language: {{ LANGUAGE_CODE }} -->
    <p>{% trans "Welcome to our page" %}</p>
{% endlanguage %}

While the first occurrence of “Welcome to our page” uses the current language, the second will always be in English.

Other tags

These tags also require a {% load i18n %}.

get_available_languages

{% get_available_languages as LANGUAGES %} returns a list of tuples in which the first element is the language code and the second is the language name (translated into the currently active locale).

get_current_language

{% get_current_language as LANGUAGE_CODE %} returns the current user’s preferred language as a string. Example: en-us. See How Django discovers language preference.

get_current_language_bidi

{% get_current_language_bidi as LANGUAGE_BIDI %} returns the current locale’s direction. If True, it’s a right-to-left language, e.g. Hebrew, Arabic. If False it’s a left-to-right language, e.g. English, French, German, etc.

If you enable the django.template.context_processors.i18n context processor then each RequestContext will have access to LANGUAGES, LANGUAGE_CODE, and LANGUAGE_BIDI as defined above.

get_language_info

You can also retrieve information about any of the available languages using provided template tags and filters. To get information about a single language, use the {% get_language_info %} tag:

{% get_language_info for LANGUAGE_CODE as lang %}
{% get_language_info for "pl" as lang %}

You can then access the information:

Language code: {{ lang.code }}<br />
Name of language: {{ lang.name_local }}<br />
Name in English: {{ lang.name }}<br />
Bi-directional: {{ lang.bidi }}
Name in the active language: {{ lang.name_translated }}

get_language_info_list

You can also use the {% get_language_info_list %} template tag to retrieve information for a list of languages (e.g. active languages as specified in LANGUAGES). See the section about the set_language redirect view for an example of how to display a language selector using {% get_language_info_list %}.

In addition to LANGUAGES style list of tuples, {% get_language_info_list %} supports simple lists of language codes. If you do this in your view:

context = {'available_languages': ['en', 'es', 'fr']}
return render(request, 'mytemplate.html', context)

you can iterate over those languages in the template:

{% get_language_info_list for available_languages as langs %}
{% for lang in langs %} ... {% endfor %}

Template filters

There are also simple filters available for convenience:

  • {{ LANGUAGE_CODE|language_name }} (“German”)
  • {{ LANGUAGE_CODE|language_name_local }} (“Deutsch”)
  • {{ LANGUAGE_CODE|language_bidi }} (False)
  • {{ LANGUAGE_CODE|language_name_translated }} (“německy”, when active language is Czech)

Internationalization: in JavaScript code

Adding translations to JavaScript poses some problems:

  • JavaScript code doesn’t have access to a gettext implementation.
  • JavaScript code doesn’t have access to .po or .mo files; they need to be delivered by the server.
  • The translation catalogs for JavaScript should be kept as small as possible.

Django provides an integrated solution for these problems: It passes the translations into JavaScript, so you can call gettext, etc., from within JavaScript.

The main solution to these problems is the following JavaScriptCatalog view, which generates a JavaScript code library with functions that mimic the gettext interface, plus an array of translation strings.

The JavaScriptCatalog view

New in Django 1.10.
class JavaScriptCatalog[source]

A view that produces a JavaScript code library with functions that mimic the gettext interface, plus an array of translation strings.

Attributes

domain

Translation domain containing strings to add in the view output. Defaults to 'djangojs'.

packages

A list of application names among installed applications. Those apps should contain a locale directory. All those catalogs plus all catalogs found in LOCALE_PATHS (which are always included) are merged into one catalog. Defaults to None, which means that all available translations from all INSTALLED_APPS are provided in the JavaScript output.

Example with default values:

from django.views.i18n import JavaScriptCatalog

urlpatterns = [
    url(r'^jsi18n/$', JavaScriptCatalog.as_view(), name='javascript-catalog'),
]

Example with custom packages:

urlpatterns = [
    url(r'^jsi18n/myapp/$',
        JavaScriptCatalog.as_view(packages=['your.app.label']),
        name='javascript-catalog'),
]

If your root URLconf uses i18n_patterns(), JavaScriptCatalog must also be wrapped by i18n_patterns() for the catalog to be correctly generated.

Example with i18n_patterns():

from django.conf.urls.i18n import i18n_patterns

urlpatterns = i18n_patterns(
    url(r'^jsi18n/$', JavaScriptCatalog.as_view(), name='javascript-catalog'),
)

The precedence of translations is such that the packages appearing later in the packages argument have higher precedence than the ones appearing at the beginning. This is important in the case of clashing translations for the same literal.

If you use more than one JavaScriptCatalog view on a site and some of them define the same strings, the strings in the catalog that was loaded last take precedence.

The javascript_catalog view

javascript_catalog(request, domain='djangojs', packages=None)[source]

Deprecated since version 1.10: javascript_catalog() is deprecated in favor of JavaScriptCatalog and will be removed in Django 2.0.

The main solution to these problems is the django.views.i18n.javascript_catalog() view, which sends out a JavaScript code library with functions that mimic the gettext interface, plus an array of translation strings. Those translation strings are taken from applications or Django core, according to what you specify in either the info_dict or the URL. Paths listed in LOCALE_PATHS are also included.

You hook it up like this:

from django.views.i18n import javascript_catalog

js_info_dict = {
    'packages': ('your.app.package',),
}

urlpatterns = [
    url(r'^jsi18n/$', javascript_catalog, js_info_dict, name='javascript-catalog'),
]

Each string in packages should be in Python dotted-package syntax (the same format as the strings in INSTALLED_APPS) and should refer to a package that contains a locale directory. If you specify multiple packages, all those catalogs are merged into one catalog. This is useful if you have JavaScript that uses strings from different applications.

The precedence of translations is such that the packages appearing later in the packages argument have higher precedence than the ones appearing at the beginning, this is important in the case of clashing translations for the same literal.

By default, the view uses the djangojs gettext domain. This can be changed by altering the domain argument.

You can make the view dynamic by putting the packages into the URL pattern:

urlpatterns = [
    url(r'^jsi18n/(?P<packages>\S+?)/$', javascript_catalog, name='javascript-catalog'),
]

With this, you specify the packages as a list of package names delimited by ‘+’ signs in the URL. This is especially useful if your pages use code from different apps and this changes often and you don’t want to pull in one big catalog file. As a security measure, these values can only be either django.conf or any package from the INSTALLED_APPS setting.

You can also split the catalogs in multiple URLs and load them as you need in your sites:

js_info_dict_app = {
    'packages': ('your.app.package',),
}

js_info_dict_other_app = {
    'packages': ('your.other.app.package',),
}

urlpatterns = [
    url(r'^jsi18n/app/$', javascript_catalog, js_info_dict_app),
    url(r'^jsi18n/other_app/$', javascript_catalog, js_info_dict_other_app),
]

If you use more than one javascript_catalog on a site and some of them define the same strings, the strings in the catalog that was loaded last take precedence.

The JavaScript translations found in the paths listed in the LOCALE_PATHS setting are also always included. To keep consistency with the translations lookup order algorithm used for Python and templates, the directories listed in LOCALE_PATHS have the highest precedence with the ones appearing first having higher precedence than the ones appearing later.

Using the JavaScript translation catalog

To use the catalog, just pull in the dynamically generated script like this:

<script type="text/javascript" src="{% url 'javascript-catalog' %}"></script>

This uses reverse URL lookup to find the URL of the JavaScript catalog view. When the catalog is loaded, your JavaScript code can use the following methods:

  • gettext
  • ngettext
  • interpolate
  • get_format
  • gettext_noop
  • pgettext
  • npgettext
  • pluralidx

gettext

The gettext function behaves similarly to the standard gettext interface within your Python code:

document.write(gettext('this is to be translated'));

ngettext

The ngettext function provides an interface to pluralize words and phrases:

var object_count = 1 // or 0, or 2, or 3, ...
s = ngettext('literal for the singular case',
        'literal for the plural case', object_count);

interpolate

The interpolate function supports dynamically populating a format string. The interpolation syntax is borrowed from Python, so the interpolate function supports both positional and named interpolation:

  • Positional interpolation: obj contains a JavaScript Array object whose elements values are then sequentially interpolated in their corresponding fmt placeholders in the same order they appear. For example:

    fmts = ngettext('There is %s object. Remaining: %s',
        'There are %s objects. Remaining: %s', 11);
s = interpolate(fmts, [11, 20]);
// s is 'There are 11 objects. Remaining: 20'

  • Named interpolation: This mode is selected by passing the optional boolean named parameter as true. obj contains a JavaScript object or associative array. For example:

    d = {
    count: 10,
    total: 50
};

fmts = ngettext('Total: %(total)s, there is %(count)s object',
'there are %(count)s of a total of %(total)s objects', d.count);
s = interpolate(fmts, d, true);

You shouldn’t go over the top with string interpolation, though: this is still JavaScript, so the code has to make repeated regular-expression substitutions. This isn’t as fast as string interpolation in Python, so keep it to those cases where you really need it (for example, in conjunction with ngettext to produce proper pluralizations).

get_format

The get_format function has access to the configured i18n formatting settings and can retrieve the format string for a given setting name:

document.write(get_format('DATE_FORMAT'));
// 'N j, Y'

It has access to the following settings:

This is useful for maintaining formatting consistency with the Python-rendered values.

gettext_noop

This emulates the gettext function but does nothing, returning whatever is passed to it:

document.write(gettext_noop('this will not be translated'));

This is useful for stubbing out portions of the code that will need translation in the future.

pgettext

The pgettext function behaves like the Python variant (pgettext()), providing a contextually translated word:

document.write(pgettext('month name', 'May'));

npgettext

The npgettext function also behaves like the Python variant (npgettext()), providing a pluralized contextually translated word:

document.write(npgettext('group', 'party', 1));
// party
document.write(npgettext('group', 'party', 2));
// parties

pluralidx

The pluralidx function works in a similar way to the pluralize template filter, determining if a given count should use a plural form of a word or not:

document.write(pluralidx(0));
// true
document.write(pluralidx(1));
// false
document.write(pluralidx(2));
// true

In the simplest case, if no custom pluralization is needed, this returns false for the integer 1 and true for all other numbers.

However, pluralization is not this simple in all languages. If the language does not support pluralization, an empty value is provided.

Additionally, if there are complex rules around pluralization, the catalog view will render a conditional expression. This will evaluate to either a true (should pluralize) or false (should not pluralize) value.

The JSONCatalog view

New in Django 1.10.
class JSONCatalog[source]

In order to use another client-side library to handle translations, you may want to take advantage of the JSONCatalog view. It’s similar to JavaScriptCatalog but returns a JSON response.

See the documentation for JavaScriptCatalog to learn about possible values and use of the domain and packages attributes.

The response format is as follows:

{
    "catalog": {
        # Translations catalog
    },
    "formats": {
        # Language formats for date, time, etc.
    },
    "plural": "..."  # Expression for plural forms, or null.
}

The json_catalog view

json_catalog(request, domain='djangojs', packages=None)[source]

Deprecated since version 1.10: json_catalog() is deprecated in favor of JSONCatalog and will be removed in Django 2.0.

In order to use another client-side library to handle translations, you may want to take advantage of the json_catalog() view. It’s similar to javascript_catalog() but returns a JSON response.

The JSON object contains i18n formatting settings (those available for get_format), a plural rule (as a plural part of a GNU gettext Plural-Forms expression), and translation strings. The translation strings are taken from applications or Django’s own translations, according to what is specified either via urlpatterns arguments or as request parameters. Paths listed in LOCALE_PATHS are also included.

The view is hooked up to your application and configured in the same fashion as javascript_catalog() (namely, the domain and packages arguments behave identically):

from django.views.i18n import json_catalog

js_info_dict = {
    'packages': ('your.app.package',),
}

urlpatterns = [
    url(r'^jsoni18n/$', json_catalog, js_info_dict),
]

The response format is as follows:

{
    "catalog": {
        # Translations catalog
    },
    "formats": {
        # Language formats for date, time, etc.
    },
    "plural": "..."  # Expression for plural forms, or null.
}

Note on performance

The various JavaScript/JSON i18n views generate the catalog from .mo files on every request. Since its output is constant, at least for a given version of a site, it’s a good candidate for caching.

Server-side caching will reduce CPU load. It’s easily implemented with the cache_page() decorator. To trigger cache invalidation when your translations change, provide a version-dependent key prefix, as shown in the example below, or map the view at a version-dependent URL:

from django.views.decorators.cache import cache_page
from django.views.i18n import JavaScriptCatalog

# The value returned by get_version() must change when translations change.
urlpatterns = [
    url(r'^jsi18n/$',
        cache_page(86400, key_prefix='js18n-%s' % get_version())(JavaScriptCatalog.as_view()),
        name='javascript-catalog'),
]

Client-side caching will save bandwidth and make your site load faster. If you’re using ETags (ConditionalGetMiddleware), you’re already covered. Otherwise, you can apply conditional decorators. In the following example, the cache is invalidated whenever you restart your application server:

from django.utils import timezone
from django.views.decorators.http import last_modified
from django.views.i18n import JavaScriptCatalog

last_modified_date = timezone.now()

urlpatterns = [
    url(r'^jsi18n/$',
        last_modified(lambda req, **kw: last_modified_date)(JavaScriptCatalog.as_view()),
        name='javascript-catalog'),
]

You can even pre-generate the JavaScript catalog as part of your deployment procedure and serve it as a static file. This radical technique is implemented in django-statici18n.

Internationalization: in URL patterns

Django provides two mechanisms to internationalize URL patterns:

Warning

Using either one of these features requires that an active language be set for each request; in other words, you need to have django.middleware.locale.LocaleMiddleware in your MIDDLEWARE setting.

Language prefix in URL patterns

i18n_patterns(*urls, prefix_default_language=True)[source]

This function can be used in a root URLconf and Django will automatically prepend the current active language code to all URL patterns defined within i18n_patterns().

Setting prefix_default_language to False removes the prefix from the default language (LANGUAGE_CODE). This can be useful when adding translations to existing site so that the current URLs won’t change.

Example URL patterns:

from django.conf.urls import include, url
from django.conf.urls.i18n import i18n_patterns

from about import views as about_views
from news import views as news_views
from sitemap.views import sitemap

urlpatterns = [
    url(r'^sitemap\.xml$', sitemap, name='sitemap-xml'),
]

news_patterns = ([
    url(r'^$', news_views.index, name='index'),
    url(r'^category/(?P<slug>[\w-]+)/$', news_views.category, name='category'),
    url(r'^(?P<slug>[\w-]+)/$', news_views.details, name='detail'),
], 'news')

urlpatterns += i18n_patterns(
    url(r'^about/$', about_views.main, name='about'),
    url(r'^news/', include(news_patterns, namespace='news')),
)

After defining these URL patterns, Django will automatically add the language prefix to the URL patterns that were added by the i18n_patterns function. Example:

>>> from django.urls import reverse
>>> from django.utils.translation import activate

>>> activate('en')
>>> reverse('sitemap-xml')
'/sitemap.xml'
>>> reverse('news:index')
'/en/news/'

>>> activate('nl')
>>> reverse('news:detail', kwargs={'slug': 'news-slug'})
'/nl/news/news-slug/'

With prefix_default_language=False and LANGUAGE_CODE='en', the URLs will be:

>>> activate('en')
>>> reverse('news:index')
'/news/'

>>> activate('nl')
>>> reverse('news:index')
'/nl/news/'
New in Django 1.10:

The prefix_default_language parameter was added.

Warning

i18n_patterns() is only allowed in a root URLconf. Using it within an included URLconf will throw an ImproperlyConfigured exception.

Changed in Django 1.10:

In older version, using i18n_patterns in a root URLconf different from ROOT_URLCONF by setting request.urlconf wasn’t supported.

Warning

Ensure that you don’t have non-prefixed URL patterns that might collide with an automatically-added language prefix.

Translating URL patterns

URL patterns can also be marked translatable using the ugettext_lazy() function. Example:

from django.conf.urls import include, url
from django.conf.urls.i18n import i18n_patterns
from django.utils.translation import ugettext_lazy as _

from about import views as about_views
from news import views as news_views
from sitemaps.views import sitemap

urlpatterns = [
    url(r'^sitemap\.xml$', sitemap, name='sitemap-xml'),
]

news_patterns = ([
    url(r'^$', news_views.index, name='index'),
    url(_(r'^category/(?P<slug>[\w-]+)/$'), news_views.category, name='category'),
    url(r'^(?P<slug>[\w-]+)/$', news_views.details, name='detail'),
], 'news')

urlpatterns += i18n_patterns(
    url(_(r'^about/$'), about_views.main, name='about'),
    url(_(r'^news/'), include(news_patterns, namespace='news')),
)

After you’ve created the translations, the reverse() function will return the URL in the active language. Example:

>>> from django.urls import reverse
>>> from django.utils.translation import activate

>>> activate('en')
>>> reverse('news:category', kwargs={'slug': 'recent'})
'/en/news/category/recent/'

>>> activate('nl')
>>> reverse('news:category', kwargs={'slug': 'recent'})
'/nl/nieuws/categorie/recent/'

Warning

In most cases, it’s best to use translated URLs only within a language-code-prefixed block of patterns (using i18n_patterns()), to avoid the possibility that a carelessly translated URL causes a collision with a non-translated URL pattern.

Reversing in templates

If localized URLs get reversed in templates they always use the current language. To link to a URL in another language use the language template tag. It enables the given language in the enclosed template section:

{% load i18n %}

{% get_available_languages as languages %}

{% trans "View this category in:" %}
{% for lang_code, lang_name in languages %}
    {% language lang_code %}
    <a href="{% url 'category' slug=category.slug %}">{{ lang_name }}</a>
    {% endlanguage %}
{% endfor %}

The language tag expects the language code as the only argument.

Localization: how to create language files

Once the string literals of an application have been tagged for later translation, the translation themselves need to be written (or obtained). Here’s how that works.

Message files

The first step is to create a message file for a new language. A message file is a plain-text file, representing a single language, that contains all available translation strings and how they should be represented in the given language. Message files have a .po file extension.

Django comes with a tool, django-admin makemessages, that automates the creation and upkeep of these files.

Gettext utilities

The makemessages command (and compilemessages discussed later) use commands from the GNU gettext toolset: xgettext, msgfmt, msgmerge and msguniq.

The minimum version of the gettext utilities supported is 0.15.

To create or update a message file, run this command:

django-admin makemessages -l de

…where de is the locale name for the message file you want to create. For example, pt_BR for Brazilian Portuguese, de_AT for Austrian German or id for Indonesian.

The script should be run from one of two places:

  • The root directory of your Django project (the one that contains manage.py).
  • The root directory of one of your Django apps.

The script runs over your project source tree or your application source tree and pulls out all strings marked for translation (see How Django discovers translations and be sure LOCALE_PATHS is configured correctly). It creates (or updates) a message file in the directory locale/LANG/LC_MESSAGES. In the de example, the file will be locale/de/LC_MESSAGES/django.po.

When you run makemessages from the root directory of your project, the extracted strings will be automatically distributed to the proper message files. That is, a string extracted from a file of an app containing a locale directory will go in a message file under that directory. A string extracted from a file of an app without any locale directory will either go in a message file under the directory listed first in LOCALE_PATHS or will generate an error if LOCALE_PATHS is empty.

By default django-admin makemessages examines every file that has the .html, .txt or .py file extension. If you want to override that default, use the --extension or -e option to specify the file extensions to examine:

django-admin makemessages -l de -e txt

Separate multiple extensions with commas and/or use -e or --extension multiple times:

django-admin makemessages -l de -e html,txt -e xml

Warning

When creating message files from JavaScript source code you need to use the special ‘djangojs’ domain, not -e js.

Using Jinja2 templates?

makemessages doesn’t understand the syntax of Jinja2 templates. To extract strings from a project containing Jinja2 templates, use Message Extracting from Babel instead.

Here’s an example babel.cfg configuration file:

# Extraction from Python source files
[python: **.py]

# Extraction from Jinja2 templates
[jinja2: **.jinja]
extensions = jinja2.ext.with_

Make sure you list all extensions you’re using! Otherwise Babel won’t recognize the tags defined by these extensions and will ignore Jinja2 templates containing them entirely.

Babel provides similar features to makemessages, can replace it in general, and doesn’t depend on gettext. For more information, read its documentation about working with message catalogs.

No gettext?

If you don’t have the gettext utilities installed, makemessages will create empty files. If that’s the case, either install the gettext utilities or just copy the English message file (locale/en/LC_MESSAGES/django.po) if available and use it as a starting point; it’s just an empty translation file.

Working on Windows?

If you’re using Windows and need to install the GNU gettext utilities so makemessages works, see gettext on Windows for more information.

The format of .po files is straightforward. Each .po file contains a small bit of metadata, such as the translation maintainer’s contact information, but the bulk of the file is a list of messages – simple mappings between translation strings and the actual translated text for the particular language.

For example, if your Django app contained a translation string for the text "Welcome to my site.", like so:

_("Welcome to my site.")

…then django-admin makemessages will have created a .po file containing the following snippet – a message:

#: path/to/python/module.py:23
msgid "Welcome to my site."
msgstr ""

A quick explanation:

  • msgid is the translation string, which appears in the source. Don’t change it.
  • msgstr is where you put the language-specific translation. It starts out empty, so it’s your responsibility to change it. Make sure you keep the quotes around your translation.
  • As a convenience, each message includes, in the form of a comment line prefixed with # and located above the msgid line, the filename and line number from which the translation string was gleaned.

Long messages are a special case. There, the first string directly after the msgstr (or msgid) is an empty string. Then the content itself will be written over the next few lines as one string per line. Those strings are directly concatenated. Don’t forget trailing spaces within the strings; otherwise, they’ll be tacked together without whitespace!

Mind your charset

Due to the way the gettext tools work internally and because we want to allow non-ASCII source strings in Django’s core and your applications, you must use UTF-8 as the encoding for your PO files (the default when PO files are created). This means that everybody will be using the same encoding, which is important when Django processes the PO files.

To reexamine all source code and templates for new translation strings and update all message files for all languages, run this:

django-admin makemessages -a

Compiling message files

After you create your message file – and each time you make changes to it – you’ll need to compile it into a more efficient form, for use by gettext. Do this with the django-admin compilemessages utility.

This tool runs over all available .po files and creates .mo files, which are binary files optimized for use by gettext. In the same directory from which you ran django-admin makemessages, run django-admin compilemessages like this:

django-admin compilemessages

That’s it. Your translations are ready for use.

Working on Windows?

If you’re using Windows and need to install the GNU gettext utilities so django-admin compilemessages works see gettext on Windows for more information.

.po files: Encoding and BOM usage.

Django only supports .po files encoded in UTF-8 and without any BOM (Byte Order Mark) so if your text editor adds such marks to the beginning of files by default then you will need to reconfigure it.

Troubleshooting: ugettext() incorrectly detects python-format in strings with percent signs

In some cases, such as strings with a percent sign followed by a space and a string conversion type (e.g. _("10% interest")), ugettext() incorrectly flags strings with python-format.

If you try to compile message files with incorrectly flagged strings, you’ll get an error message like number of format specifications in 'msgid' and 'msgstr' does not match or 'msgstr' is not a valid Python format string, unlike 'msgid'.

To workaround this, you can escape percent signs by adding a second percent sign:

from django.utils.translation import ugettext as _
output = _("10%% interest")

Or you can use no-python-format so that all percent signs are treated as literals:

# xgettext:no-python-format
output = _("10% interest")

Creating message files from JavaScript source code

You create and update the message files the same way as the other Django message files – with the django-admin makemessages tool. The only difference is you need to explicitly specify what in gettext parlance is known as a domain in this case the djangojs domain, by providing a -d djangojs parameter, like this:

django-admin makemessages -d djangojs -l de

This would create or update the message file for JavaScript for German. After updating message files, just run django-admin compilemessages the same way as you do with normal Django message files.

gettext on Windows

This is only needed for people who either want to extract message IDs or compile message files (.po). Translation work itself just involves editing existing files of this type, but if you want to create your own message files, or want to test or compile a changed message file, download a precompiled binary installer.

You may also use gettext binaries you have obtained elsewhere, so long as the xgettext --version command works properly. Do not attempt to use Django translation utilities with a gettext package if the command xgettext --version entered at a Windows command prompt causes a popup window saying “xgettext.exe has generated errors and will be closed by Windows”.

Customizing the makemessages command

If you want to pass additional parameters to xgettext, you need to create a custom makemessages command and override its xgettext_options attribute:

from django.core.management.commands import makemessages

class Command(makemessages.Command):
    xgettext_options = makemessages.Command.xgettext_options + ['--keyword=mytrans']

If you need more flexibility, you could also add a new argument to your custom makemessages command:

from django.core.management.commands import makemessages

class Command(makemessages.Command):

    def add_arguments(self, parser):
        super(Command, self).add_arguments(parser)
        parser.add_argument(
            '--extra-keyword',
            dest='xgettext_keywords',
            action='append',
        )

    def handle(self, *args, **options):
        xgettext_keywords = options.pop('xgettext_keywords')
        if xgettext_keywords:
            self.xgettext_options = (
                makemessages.Command.xgettext_options[:] +
                ['--keyword=%s' % kwd for kwd in xgettext_keywords]
            )
        super(Command, self).handle(*args, **options)

Miscellaneous

The set_language redirect view

set_language(request)[source]

As a convenience, Django comes with a view, django.views.i18n.set_language(), that sets a user’s language preference and redirects to a given URL or, by default, back to the previous page.

Activate this view by adding the following line to your URLconf:

url(r'^i18n/', include('django.conf.urls.i18n')),

(Note that this example makes the view available at /i18n/setlang/.)

Warning

Make sure that you don’t include the above URL within i18n_patterns() - it needs to be language-independent itself to work correctly.

The view expects to be called via the POST method, with a language parameter set in request. If session support is enabled, the view saves the language choice in the user’s session. Otherwise, it saves the language choice in a cookie that is by default named django_language. (The name can be changed through the LANGUAGE_COOKIE_NAME setting.)

After setting the language choice, Django looks for a next parameter in the POST or GET data. If that is found and Django considers it to be a safe URL (i.e. it doesn’t point to a different host and uses a safe scheme), a redirect to that URL will be performed. Otherwise, Django may fall back to redirecting the user to the URL from the Referer header or, if it is not set, to /, depending on the nature of the request:

  • For AJAX requests, the fallback will be performed only if the next parameter was set. Otherwise a 204 status code (No Content) will be returned.
  • For non-AJAX requests, the fallback will always be performed.
Changed in Django 1.10:

Returning a 204 status code for AJAX requests when no redirect is specified is new.

Here’s example HTML template code:

{% load i18n %}

<form action="{% url 'set_language' %}" method="post">{% csrf_token %}
    <input name="next" type="hidden" value="{{ redirect_to }}" />
    <select name="language">
        {% get_current_language as LANGUAGE_CODE %}
        {% get_available_languages as LANGUAGES %}
        {% get_language_info_list for LANGUAGES as languages %}
        {% for language in languages %}
            <option value="{{ language.code }}"{% if language.code == LANGUAGE_CODE %} selected{% endif %}>
                {{ language.name_local }} ({{ language.code }})
            </option>
        {% endfor %}
    </select>
    <input type="submit" value="Go" />
</form>

In this example, Django looks up the URL of the page to which the user will be redirected in the redirect_to context variable.

Explicitly setting the active language

You may want to set the active language for the current session explicitly. Perhaps a user’s language preference is retrieved from another system, for example. You’ve already been introduced to django.utils.translation.activate(). That applies to the current thread only. To persist the language for the entire session, also modify LANGUAGE_SESSION_KEY in the session:

from django.utils import translation
user_language = 'fr'
translation.activate(user_language)
request.session[translation.LANGUAGE_SESSION_KEY] = user_language

You would typically want to use both: django.utils.translation.activate() will change the language for this thread, and modifying the session makes this preference persist in future requests.

If you are not using sessions, the language will persist in a cookie, whose name is configured in LANGUAGE_COOKIE_NAME. For example:

from django.utils import translation
from django import http
from django.conf import settings
user_language = 'fr'
translation.activate(user_language)
response = http.HttpResponse(...)
response.set_cookie(settings.LANGUAGE_COOKIE_NAME, user_language)

Using translations outside views and templates

While Django provides a rich set of i18n tools for use in views and templates, it does not restrict the usage to Django-specific code. The Django translation mechanisms can be used to translate arbitrary texts to any language that is supported by Django (as long as an appropriate translation catalog exists, of course). You can load a translation catalog, activate it and translate text to language of your choice, but remember to switch back to original language, as activating a translation catalog is done on per-thread basis and such change will affect code running in the same thread.

For example:

from django.utils import translation

def welcome_translated(language):
    cur_language = translation.get_language()
    try:
        translation.activate(language)
        text = translation.ugettext('welcome')
    finally:
        translation.activate(cur_language)
    return text

Calling this function with the value ‘de’ will give you "Willkommen", regardless of LANGUAGE_CODE and language set by middleware.

Functions of particular interest are django.utils.translation.get_language() which returns the language used in the current thread, django.utils.translation.activate() which activates a translation catalog for the current thread, and django.utils.translation.check_for_language() which checks if the given language is supported by Django.

To help write more concise code, there is also a context manager django.utils.translation.override() that stores the current language on enter and restores it on exit. With it, the above example becomes:

from django.utils import translation

def welcome_translated(language):
    with translation.override(language):
        return translation.ugettext('welcome')

Implementation notes

Specialties of Django translation

Django’s translation machinery uses the standard gettext module that comes with Python. If you know gettext, you might note these specialties in the way Django does translation:

  • The string domain is django or djangojs. This string domain is used to differentiate between different programs that store their data in a common message-file library (usually /usr/share/locale/). The django domain is used for Python and template translation strings and is loaded into the global translation catalogs. The djangojs domain is only used for JavaScript translation catalogs to make sure that those are as small as possible.
  • Django doesn’t use xgettext alone. It uses Python wrappers around xgettext and msgfmt. This is mostly for convenience.

How Django discovers language preference

Once you’ve prepared your translations – or, if you just want to use the translations that come with Django – you’ll just need to activate translation for your app.

Behind the scenes, Django has a very flexible model of deciding which language should be used – installation-wide, for a particular user, or both.

To set an installation-wide language preference, set LANGUAGE_CODE. Django uses this language as the default translation – the final attempt if no better matching translation is found through one of the methods employed by the locale middleware (see below).

If all you want is to run Django with your native language all you need to do is set LANGUAGE_CODE and make sure the corresponding message files and their compiled versions (.mo) exist.

If you want to let each individual user specify which language they prefer, then you also need to use the LocaleMiddleware. LocaleMiddleware enables language selection based on data from the request. It customizes content for each user.

To use LocaleMiddleware, add 'django.middleware.locale.LocaleMiddleware' to your MIDDLEWARE setting. Because middleware order matters, follow these guidelines:

  • Make sure it’s one of the first middleware installed.
  • It should come after SessionMiddleware, because LocaleMiddleware makes use of session data. And it should come before CommonMiddleware because CommonMiddleware needs an activated language in order to resolve the requested URL.
  • If you use CacheMiddleware, put LocaleMiddleware after it.

For example, your MIDDLEWARE might look like this:

MIDDLEWARE = [
   'django.contrib.sessions.middleware.SessionMiddleware',
   'django.middleware.locale.LocaleMiddleware',
   'django.middleware.common.CommonMiddleware',
]

(For more on middleware, see the middleware documentation.)

LocaleMiddleware tries to determine the user’s language preference by following this algorithm:

  • First, it looks for the language prefix in the requested URL. This is only performed when you are using the i18n_patterns function in your root URLconf. See Internationalization: in URL patterns for more information about the language prefix and how to internationalize URL patterns.

  • Failing that, it looks for the LANGUAGE_SESSION_KEY key in the current user’s session.

  • Failing that, it looks for a cookie.

    The name of the cookie used is set by the LANGUAGE_COOKIE_NAME setting. (The default name is django_language.)

  • Failing that, it looks at the Accept-Language HTTP header. This header is sent by your browser and tells the server which language(s) you prefer, in order by priority. Django tries each language in the header until it finds one with available translations.

  • Failing that, it uses the global LANGUAGE_CODE setting.

Notes:

  • In each of these places, the language preference is expected to be in the standard language format, as a string. For example, Brazilian Portuguese is pt-br.

  • If a base language is available but the sublanguage specified is not, Django uses the base language. For example, if a user specifies de-at (Austrian German) but Django only has de available, Django uses de.

  • Only languages listed in the LANGUAGES setting can be selected. If you want to restrict the language selection to a subset of provided languages (because your application doesn’t provide all those languages), set LANGUAGES to a list of languages. For example:

    LANGUAGES = [
  ('de', _('German')),
  ('en', _('English')),
]

    This example restricts languages that are available for automatic selection to German and English (and any sublanguage, like de-ch or en-us).

  • If you define a custom LANGUAGES setting, as explained in the previous bullet, you can mark the language names as translation strings – but use ugettext_lazy() instead of ugettext() to avoid a circular import.

    Here’s a sample settings file:

    from django.utils.translation import ugettext_lazy as _

LANGUAGES = [
    ('de', _('German')),
    ('en', _('English')),
]

Once LocaleMiddleware determines the user’s preference, it makes this preference available as request.LANGUAGE_CODE for each HttpRequest. Feel free to read this value in your view code. Here’s a simple example:

from django.http import HttpResponse

def hello_world(request, count):
    if request.LANGUAGE_CODE == 'de-at':
        return HttpResponse("You prefer to read Austrian German.")
    else:
        return HttpResponse("You prefer to read another language.")

Note that, with static (middleware-less) translation, the language is in settings.LANGUAGE_CODE, while with dynamic (middleware) translation, it’s in request.LANGUAGE_CODE.

How Django discovers translations

At runtime, Django builds an in-memory unified catalog of literals-translations. To achieve this it looks for translations by following this algorithm regarding the order in which it examines the different file paths to load the compiled message files (.mo) and the precedence of multiple translations for the same literal:

  1. The directories listed in LOCALE_PATHS have the highest precedence, with the ones appearing first having higher precedence than the ones appearing later.
  2. Then, it looks for and uses if it exists a locale directory in each of the installed apps listed in INSTALLED_APPS. The ones appearing first have higher precedence than the ones appearing later.
  3. Finally, the Django-provided base translation in django/conf/locale is used as a fallback.

See also

The translations for literals included in JavaScript assets are looked up following a similar but not identical algorithm. See the javascript_catalog view documentation for more details.

In all cases the name of the directory containing the translation is expected to be named using locale name notation. E.g. de, pt_BR, es_AR, etc.

This way, you can write applications that include their own translations, and you can override base translations in your project. Or, you can just build a big project out of several apps and put all translations into one big common message file specific to the project you are composing. The choice is yours.

All message file repositories are structured the same way. They are:

  • All paths listed in LOCALE_PATHS in your settings file are searched for <language>/LC_MESSAGES/django.(po|mo)
  • $APPPATH/locale/<language>/LC_MESSAGES/django.(po|mo)
  • $PYTHONPATH/django/conf/locale/<language>/LC_MESSAGES/django.(po|mo)

To create message files, you use the django-admin makemessages tool. And you use django-admin compilemessages to produce the binary .mo files that are used by gettext.

You can also run django-admin compilemessages --settings=path.to.settings to make the compiler process all the directories in your LOCALE_PATHS setting.

Using a non-English base language

Django makes the general assumption that the original strings in a translatable project are written in English. You can choose another language, but you must be aware of certain limitations:

  • gettext only provides two plural forms for the original messages, so you will also need to provide a translation for the base language to include all plural forms if the plural rules for the base language are different from English.
  • When an English variant is activated and English strings are missing, the fallback language will not be the LANGUAGE_CODE of the project, but the original strings. For example, an English user visiting a site with Spanish as the default language and original strings written in Russian will fallback to Russian, not to Spanish.
« previous | up | next »