Signals¶

A list of all the signals that Django sends. All built-in signals are sent using the send() method.

Model signals¶

The django.db.models.signals module defines a set of signals sent by the model system.

Warning

Many of these signals are sent by various model methods like __init__() or save() that you can override in your own code.

If you override these methods on your model, you must call the parent class’ methods for this signals to be sent.

Note also that Django stores signal handlers as weak references by default, so if your handler is a local function, it may be garbage collected. To prevent this, pass weak=False when you call the signal’s connect().

Note

Model signals sender model can be lazily referenced when connecting a receiver by specifying its full application label. For example, an Answer model defined in the polls application could be referenced as 'polls.Answer'. This sort of reference can be quite handy when dealing with circular import dependencies and swappable models.

`pre_init`¶

django.db.models.signals.pre_init¶

Whenever you instantiate a Django model, this signal is sent at the beginning of the model’s __init__() method.

Arguments sent with this signal:

sender: The model class that just had an instance created.
args: A list of positional arguments passed to __init__():
kwargs: A dictionary of keyword arguments passed to __init__():

For example, the tutorial has this line:

p = Poll(question="What's up?", pub_date=datetime.now())

The arguments sent to a pre_init handler would be:

Argument	Value
`sender`	`Poll` (the class itself)
`args`	`[]` (an empty list because there were no positional arguments passed to `__init__()`.)
`kwargs`	`{'question': "What's up?", 'pub_date': datetime.now()}`

`post_init`¶

django.db.models.signals.post_init¶

Like pre_init, but this one is sent when the __init__() method finishes.

Arguments sent with this signal:

sender: As above: the model class that just had an instance created.
instance: The actual instance of the model that’s just been created.

`pre_save`¶

django.db.models.signals.pre_save¶

This is sent at the beginning of a model’s save() method.

Arguments sent with this signal:

sender: The model class.
instance: The actual instance being saved.
raw: A boolean; True if the model is saved exactly as presented (i.e. when loading a fixture). One should not query/modify other records in the database as the database might not be in a consistent state yet.
using: The database alias being used.
update_fields: The set of fields to update as passed to Model.save(), or None if update_fields wasn’t passed to save().

`post_save`¶

django.db.models.signals.post_save¶

Like pre_save, but sent at the end of the save() method.

Arguments sent with this signal:

sender: The model class.
instance: The actual instance being saved.
created: A boolean; True if a new record was created.
raw: A boolean; True if the model is saved exactly as presented (i.e. when loading a fixture). One should not query/modify other records in the database as the database might not be in a consistent state yet.
using: The database alias being used.
update_fields: The set of fields to update as passed to Model.save(), or None if update_fields wasn’t passed to save().

`pre_delete`¶

django.db.models.signals.pre_delete¶

Sent at the beginning of a model’s delete() method and a queryset’s delete() method.

Arguments sent with this signal:

sender: The model class.
instance: The actual instance being deleted.
using: The database alias being used.

`post_delete`¶

django.db.models.signals.post_delete¶

Like pre_delete, but sent at the end of a model’s delete() method and a queryset’s delete() method.

Arguments sent with this signal:

sender

The model class.

instance

The actual instance being deleted.

Note that the object will no longer be in the database, so be very careful what you do with this instance.

using

The database alias being used.

`m2m_changed`¶

django.db.models.signals.m2m_changed¶

Sent when a ManyToManyField is changed on a model instance. Strictly speaking, this is not a model signal since it is sent by the ManyToManyField, but since it complements the pre_save/post_save and pre_delete/post_delete when it comes to tracking changes to models, it is included here.

Arguments sent with this signal:

sender

The intermediate model class describing the ManyToManyField. This class is automatically created when a many-to-many field is defined; you can access it using the through attribute on the many-to-many field.

instance

The instance whose many-to-many relation is updated. This can be an instance of the sender, or of the class the ManyToManyField is related to.

action

A string indicating the type of update that is done on the relation. This can be one of the following:

"pre_add": Sent before one or more objects are added to the relation.
"post_add": Sent after one or more objects are added to the relation.
"pre_remove": Sent before one or more objects are removed from the relation.
"post_remove": Sent after one or more objects are removed from the relation.
"pre_clear": Sent before the relation is cleared.
"post_clear": Sent after the relation is cleared.

reverse

Indicates which side of the relation is updated (i.e., if it is the forward or reverse relation that is being modified).

model

The class of the objects that are added to, removed from or cleared from the relation.

pk_set

For the pre_add, post_add, pre_remove and post_remove actions, this is a set of primary key values that have been added to or removed from the relation.

For the pre_clear and post_clear actions, this is None.

using

The database alias being used.

For example, if a Pizza can have multiple Topping objects, modeled like this:

class Topping(models.Model):
    # ...
    pass

class Pizza(models.Model):
    # ...
    toppings = models.ManyToManyField(Topping)

If we connected a handler like this:

from django.db.models.signals import m2m_changed

def toppings_changed(sender, **kwargs):
    # Do something
    pass

m2m_changed.connect(toppings_changed, sender=Pizza.toppings.through)

and then did something like this:

>>> p = Pizza.objects.create(...)
>>> t = Topping.objects.create(...)
>>> p.toppings.add(t)

the arguments sent to a m2m_changed handler (toppings_changed in the example above) would be:

Argument	Value
`sender`	`Pizza.toppings.through` (the intermediate m2m class)
`instance`	`p` (the `Pizza` instance being modified)
`action`	`"pre_add"` (followed by a separate signal with `"post_add"`)
`reverse`	`False` (`Pizza` contains the `ManyToManyField`, so this call modifies the forward relation)
`model`	`Topping` (the class of the objects added to the `Pizza`)
`pk_set`	`{t.id}` (since only `Topping t` was added to the relation)
`using`	`"default"` (since the default router sends writes here)

And if we would then do something like this:

>>> t.pizza_set.remove(p)

the arguments sent to a m2m_changed handler would be:

Argument	Value
`sender`	`Pizza.toppings.through` (the intermediate m2m class)
`instance`	`t` (the `Topping` instance being modified)
`action`	`"pre_remove"` (followed by a separate signal with `"post_remove"`)
`reverse`	`True` (`Pizza` contains the `ManyToManyField`, so this call modifies the reverse relation)
`model`	`Pizza` (the class of the objects removed from the `Topping`)
`pk_set`	`{p.id}` (since only `Pizza p` was removed from the relation)
`using`	`"default"` (since the default router sends writes here)

`class_prepared`¶

django.db.models.signals.class_prepared¶

Sent whenever a model class has been “prepared” – that is, once model has been defined and registered with Django’s model system. Django uses this signal internally; it’s not generally used in third-party applications.

Since this signal is sent during the app registry population process, and AppConfig.ready() runs after the app registry is fully populated, receivers cannot be connected in that method. One possibility is to connect them AppConfig.__init__() instead, taking care not to import models or trigger calls to the app registry.

Arguments that are sent with this signal:

sender: The model class which was just prepared.

Management signals¶

Signals sent by django-admin.

`pre_migrate`¶

django.db.models.signals.pre_migrate¶

Sent by the migrate command before it starts to install an application. It’s not emitted for applications that lack a models module.

Arguments sent with this signal:

sender

An AppConfig instance for the application about to be migrated/synced.

app_config

Same as sender.

verbosity

Indicates how much information manage.py is printing on screen. See the --verbosity flag for details.

Functions which listen for pre_migrate should adjust what they output to the screen based on the value of this argument.

interactive

If interactive is True, it’s safe to prompt the user to input things on the command line. If interactive is False, functions which listen for this signal should not try to prompt for anything.

For example, the django.contrib.auth app only prompts to create a superuser when interactive is True.

using

The alias of database on which a command will operate.

plan

New in Django 1.10.

The migration plan that is going to be used for the migration run. While the plan is not public API, this allows for the rare cases when it is necessary to know the plan. A plan is a list of two-tuples with the first item being the instance of a migration class and the second item showing if the migration was rolled back (True) or applied (False).

apps

New in Django 1.10.

An instance of Apps containing the state of the project before the migration run. It should be used instead of the global apps registry to retrieve the models you want to perform operations on.

`post_migrate`¶

django.db.models.signals.post_migrate¶

Sent at the end of the migrate (even if no migrations are run) and flush commands. It’s not emitted for applications that lack a models module.

Handlers of this signal must not perform database schema alterations as doing so may cause the flush command to fail if it runs during the migrate command.

Arguments sent with this signal:

sender

An AppConfig instance for the application that was just installed.

app_config

Same as sender.

verbosity

Indicates how much information manage.py is printing on screen. See the --verbosity flag for details.

Functions which listen for post_migrate should adjust what they output to the screen based on the value of this argument.

interactive

If interactive is True, it’s safe to prompt the user to input things on the command line. If interactive is False, functions which listen for this signal should not try to prompt for anything.

For example, the django.contrib.auth app only prompts to create a superuser when interactive is True.

using

The database alias used for synchronization. Defaults to the default database.

plan

New in Django 1.10.

The migration plan that was used for the migration run. While the plan is not public API, this allows for the rare cases when it is necessary to know the plan. A plan is a list of two-tuples with the first item being the instance of a migration class and the second item showing if the migration was rolled back (True) or applied (False).

apps

New in Django 1.10.

An instance of Apps containing the state of the project after the migration run. It should be used instead of the global apps registry to retrieve the models you want to perform operations on.

For example, you could register a callback in an AppConfig like this:

from django.apps import AppConfig
from django.db.models.signals import post_migrate

def my_callback(sender, **kwargs):
    # Your specific logic here
    pass

class MyAppConfig(AppConfig):
    ...

    def ready(self):
        post_migrate.connect(my_callback, sender=self)

Note

If you provide an AppConfig instance as the sender argument, please ensure that the signal is registered in ready(). AppConfigs are recreated for tests that run with a modified set of INSTALLED_APPS (such as when settings are overridden) and such signals should be connected for each new AppConfig instance.

Request/response signals¶

Signals sent by the core framework when processing a request.

`request_started`¶

django.core.signals.request_started¶

Sent when Django begins processing an HTTP request.

Arguments sent with this signal:

sender: The handler class – e.g. django.core.handlers.wsgi.WsgiHandler – that handled the request.
environ: The environ dictionary provided to the request.

`request_finished`¶

django.core.signals.request_finished¶

Sent when Django finishes delivering an HTTP response to the client.

Arguments sent with this signal:

sender: The handler class, as above.

`got_request_exception`¶

django.core.signals.got_request_exception¶

This signal is sent whenever Django encounters an exception while processing an incoming HTTP request.

Arguments sent with this signal:

sender: The handler class, as above.
request: The HttpRequest object.

Test signals¶

Signals only sent when running tests.

`setting_changed`¶

django.test.signals.setting_changed¶

This signal is sent when the value of a setting is changed through the django.test.TestCase.settings() context manager or the django.test.override_settings() decorator/context manager.

It’s actually sent twice: when the new value is applied (“setup”) and when the original value is restored (“teardown”). Use the enter argument to distinguish between the two.

You can also import this signal from django.core.signals to avoid importing from django.test in non-test situations.

Arguments sent with this signal:

sender: The settings handler.
setting: The name of the setting.
value: The value of the setting after the change. For settings that initially don’t exist, in the “teardown” phase, value is None.
enter: A boolean; True if the setting is applied, False if restored.

`template_rendered`¶

django.test.signals.template_rendered¶

Sent when the test system renders a template. This signal is not emitted during normal operation of a Django server – it is only available during testing.

Arguments sent with this signal:

sender: The Template object which was rendered.
template: Same as sender
context: The Context with which the template was rendered.

Database Wrappers¶

Signals sent by the database wrapper when a database connection is initiated.

`connection_created`¶

django.db.backends.signals.connection_created¶

Sent when the database wrapper makes the initial connection to the database. This is particularly useful if you’d like to send any post connection commands to the SQL backend.

Arguments sent with this signal:

sender: The database wrapper class – i.e. django.db.backends.postgresql.DatabaseWrapper or django.db.backends.mysql.DatabaseWrapper, etc.
connection: The database connection that was opened. This can be used in a multiple-database configuration to differentiate connection signals from different databases.

Django 1.11.29 documentation

Signals¶

Model signals¶

`pre_init`¶

`post_init`¶

`pre_save`¶

`post_save`¶

`pre_delete`¶

`post_delete`¶

`m2m_changed`¶

`class_prepared`¶

Management signals¶

`pre_migrate`¶

`post_migrate`¶

Request/response signals¶

`request_started`¶

`request_finished`¶

`got_request_exception`¶

Test signals¶

`setting_changed`¶

`template_rendered`¶

Database Wrappers¶

`connection_created`¶

Table of Contents

Previous topic

Next topic

Last update:

Django 1.11.29 documentation

Signals¶

Model signals¶

pre_init¶

post_init¶

pre_save¶

post_save¶

pre_delete¶

post_delete¶

m2m_changed¶

class_prepared¶

Management signals¶

pre_migrate¶

post_migrate¶

Request/response signals¶

request_started¶

request_finished¶

got_request_exception¶

Test signals¶

setting_changed¶

template_rendered¶

Database Wrappers¶

connection_created¶

Last update:

`pre_init`¶

`post_init`¶

`pre_save`¶

`post_save`¶

`pre_delete`¶

`post_delete`¶

`m2m_changed`¶

`class_prepared`¶

`pre_migrate`¶

`post_migrate`¶

`request_started`¶

`request_finished`¶

`got_request_exception`¶

`setting_changed`¶

`template_rendered`¶

`connection_created`¶