Django 1.11.29 documentation

Home | Table of contents | Index | Modules

« previous | up | next »

Model field reference

This document contains all the API references of Field including the field options and field types Django offers.

See also

If the built-in fields don’t do the trick, you can try django-localflavor (documentation), which contains assorted pieces of code that are useful for particular countries and cultures.

Also, you can easily write your own custom model fields.

Note

Technically, these models are defined in django.db.models.fields, but for convenience they’re imported into django.db.models; the standard convention is to use from django.db import models and refer to fields as models.<Foo>Field.

Field options

The following arguments are available to all field types. All are optional.

null

Field.null

If True, Django will store empty values as NULL in the database. Default is False.

Avoid using null on string-based fields such as CharField and TextField. If a string-based field has null=True, that means it has two possible values for “no data”: NULL, and the empty string. In most cases, it’s redundant to have two possible values for “no data;” the Django convention is to use the empty string, not NULL. One exception is when a CharField has both unique=True and blank=True set. In this situation, null=True is required to avoid unique constraint violations when saving multiple objects with blank values.

For both string-based and non-string-based fields, you will also need to set blank=True if you wish to permit empty values in forms, as the null parameter only affects database storage (see blank).

Note

When using the Oracle database backend, the value NULL will be stored to denote the empty string regardless of this attribute.

If you want to accept null values with BooleanField, use NullBooleanField instead.

blank

Field.blank

If True, the field is allowed to be blank. Default is False.

Note that this is different than null. null is purely database-related, whereas blank is validation-related. If a field has blank=True, form validation will allow entry of an empty value. If a field has blank=False, the field will be required.

choices

Field.choices

An iterable (e.g., a list or tuple) consisting itself of iterables of exactly two items (e.g. [(A, B), (A, B) ...]) to use as choices for this field. If this is given, the default form widget will be a select box with these choices instead of the standard text field.

The first element in each tuple is the actual value to be set on the model, and the second element is the human-readable name. For example:

YEAR_IN_SCHOOL_CHOICES = (
    ('FR', 'Freshman'),
    ('SO', 'Sophomore'),
    ('JR', 'Junior'),
    ('SR', 'Senior'),
)

Generally, it’s best to define choices inside a model class, and to define a suitably-named constant for each value:

from django.db import models

class Student(models.Model):
    FRESHMAN = 'FR'
    SOPHOMORE = 'SO'
    JUNIOR = 'JR'
    SENIOR = 'SR'
    YEAR_IN_SCHOOL_CHOICES = (
        (FRESHMAN, 'Freshman'),
        (SOPHOMORE, 'Sophomore'),
        (JUNIOR, 'Junior'),
        (SENIOR, 'Senior'),
    )
    year_in_school = models.CharField(
        max_length=2,
        choices=YEAR_IN_SCHOOL_CHOICES,
        default=FRESHMAN,
    )

    def is_upperclass(self):
        return self.year_in_school in (self.JUNIOR, self.SENIOR)

Though you can define a choices list outside of a model class and then refer to it, defining the choices and names for each choice inside the model class keeps all of that information with the class that uses it, and makes the choices easy to reference (e.g, Student.SOPHOMORE will work anywhere that the Student model has been imported).

You can also collect your available choices into named groups that can be used for organizational purposes:

MEDIA_CHOICES = (
    ('Audio', (
            ('vinyl', 'Vinyl'),
            ('cd', 'CD'),
        )
    ),
    ('Video', (
            ('vhs', 'VHS Tape'),
            ('dvd', 'DVD'),
        )
    ),
    ('unknown', 'Unknown'),
)

The first element in each tuple is the name to apply to the group. The second element is an iterable of 2-tuples, with each 2-tuple containing a value and a human-readable name for an option. Grouped options may be combined with ungrouped options within a single list (such as the unknown option in this example).

For each model field that has choices set, Django will add a method to retrieve the human-readable name for the field’s current value. See get_FOO_display() in the database API documentation.

Note that choices can be any iterable object – not necessarily a list or tuple. This lets you construct choices dynamically. But if you find yourself hacking choices to be dynamic, you’re probably better off using a proper database table with a ForeignKey. choices is meant for static data that doesn’t change much, if ever.

Unless blank=False is set on the field along with a default then a label containing "---------" will be rendered with the select box. To override this behavior, add a tuple to choices containing None; e.g. (None, 'Your String For Display'). Alternatively, you can use an empty string instead of None where this makes sense - such as on a CharField.

db_column

Field.db_column

The name of the database column to use for this field. If this isn’t given, Django will use the field’s name.

If your database column name is an SQL reserved word, or contains characters that aren’t allowed in Python variable names – notably, the hyphen – that’s OK. Django quotes column and table names behind the scenes.

db_index

Field.db_index

If True, a database index will be created for this field.

db_tablespace

Field.db_tablespace

The name of the database tablespace to use for this field’s index, if this field is indexed. The default is the project’s DEFAULT_INDEX_TABLESPACE setting, if set, or the db_tablespace of the model, if any. If the backend doesn’t support tablespaces for indexes, this option is ignored.

default

Field.default

The default value for the field. This can be a value or a callable object. If callable it will be called every time a new object is created.

The default can’t be a mutable object (model instance, list, set, etc.), as a reference to the same instance of that object would be used as the default value in all new model instances. Instead, wrap the desired default in a callable. For example, if you want to specify a default dict for JSONField, use a function:

def contact_default():
    return {"email": "to1@example.com"}

contact_info = JSONField("ContactInfo", default=contact_default)

lambdas can’t be used for field options like default because they can’t be serialized by migrations. See that documentation for other caveats.

For fields like ForeignKey that map to model instances, defaults should be the value of the field they reference (pk unless to_field is set) instead of model instances.

The default value is used when new model instances are created and a value isn’t provided for the field. When the field is a primary key, the default is also used when the field is set to None.

editable

Field.editable

If False, the field will not be displayed in the admin or any other ModelForm. They are also skipped during model validation. Default is True.

error_messages

Field.error_messages

The error_messages argument lets you override the default messages that the field will raise. Pass in a dictionary with keys matching the error messages you want to override.

Error message keys include null, blank, invalid, invalid_choice, unique, and unique_for_date. Additional error message keys are specified for each field in the Field types section below.

These error messages often don’t propagate to forms. See Considerations regarding model’s error_messages.

help_text

Field.help_text

Extra “help” text to be displayed with the form widget. It’s useful for documentation even if your field isn’t used on a form.

Note that this value is not HTML-escaped in automatically-generated forms. This lets you include HTML in help_text if you so desire. For example:

help_text="Please use the following format: <em>YYYY-MM-DD</em>."

Alternatively you can use plain text and django.utils.html.escape() to escape any HTML special characters. Ensure that you escape any help text that may come from untrusted users to avoid a cross-site scripting attack.

primary_key

Field.primary_key

If True, this field is the primary key for the model.

If you don’t specify primary_key=True for any field in your model, Django will automatically add an AutoField to hold the primary key, so you don’t need to set primary_key=True on any of your fields unless you want to override the default primary-key behavior. For more, see Automatic primary key fields.

primary_key=True implies null=False and unique=True. Only one primary key is allowed on an object.

The primary key field is read-only. If you change the value of the primary key on an existing object and then save it, a new object will be created alongside the old one.

unique

Field.unique

If True, this field must be unique throughout the table.

This is enforced at the database level and by model validation. If you try to save a model with a duplicate value in a unique field, a django.db.IntegrityError will be raised by the model’s save() method.

This option is valid on all field types except ManyToManyField and OneToOneField.

Note that when unique is True, you don’t need to specify db_index, because unique implies the creation of an index.

Changed in Django 1.11:

In older versions, unique=True can’t be used on FileField.

unique_for_date

Field.unique_for_date

Set this to the name of a DateField or DateTimeField to require that this field be unique for the value of the date field.

For example, if you have a field title that has unique_for_date="pub_date", then Django wouldn’t allow the entry of two records with the same title and pub_date.

Note that if you set this to point to a DateTimeField, only the date portion of the field will be considered. Besides, when USE_TZ is True, the check will be performed in the current time zone at the time the object gets saved.

This is enforced by Model.validate_unique() during model validation but not at the database level. If any unique_for_date constraint involves fields that are not part of a ModelForm (for example, if one of the fields is listed in exclude or has editable=False), Model.validate_unique() will skip validation for that particular constraint.

unique_for_month

Field.unique_for_month

Like unique_for_date, but requires the field to be unique with respect to the month.

unique_for_year

Field.unique_for_year

Like unique_for_date and unique_for_month.

verbose_name

Field.verbose_name

A human-readable name for the field. If the verbose name isn’t given, Django will automatically create it using the field’s attribute name, converting underscores to spaces. See Verbose field names.

validators

Field.validators

A list of validators to run for this field. See the validators documentation for more information.

Registering and fetching lookups

Field implements the lookup registration API. The API can be used to customize which lookups are available for a field class, and how lookups are fetched from a field.

Field types

AutoField

class AutoField(**options)

An IntegerField that automatically increments according to available IDs. You usually won’t need to use this directly; a primary key field will automatically be added to your model if you don’t specify otherwise. See Automatic primary key fields.

BigAutoField

class BigAutoField(**options)

New in Django 1.10.

A 64-bit integer, much like an AutoField except that it is guaranteed to fit numbers from 1 to 9223372036854775807.

BigIntegerField

class BigIntegerField(**options)

A 64-bit integer, much like an IntegerField except that it is guaranteed to fit numbers from -9223372036854775808 to 9223372036854775807. The default form widget for this field is a TextInput.

BinaryField

class BinaryField(**options)

A field to store raw binary data. It only supports bytes assignment. Be aware that this field has limited functionality. For example, it is not possible to filter a queryset on a BinaryField value. It is also not possible to include a BinaryField in a ModelForm.

Abusing BinaryField

Although you might think about storing files in the database, consider that it is bad design in 99% of the cases. This field is not a replacement for proper static files handling.

BooleanField

class BooleanField(**options)

A true/false field.

The default form widget for this field is a CheckboxInput.

If you need to accept null values then use NullBooleanField instead.

The default value of BooleanField is None when Field.default isn’t defined.

CharField

class CharField(max_length=None, **options)

A string field, for small- to large-sized strings.

For large amounts of text, use TextField.

The default form widget for this field is a TextInput.

CharField has one extra required argument:

CharField.max_length

The maximum length (in characters) of the field. The max_length is enforced at the database level and in Django’s validation.

Note

If you are writing an application that must be portable to multiple database backends, you should be aware that there are restrictions on max_length for some backends. Refer to the database backend notes for details.

CommaSeparatedIntegerField

class CommaSeparatedIntegerField(max_length=None, **options)

Deprecated since version 1.9: This field is deprecated in favor of CharField with validators=[validate_comma_separated_integer_list].

A field of integers separated by commas. As in CharField, the max_length argument is required and the note about database portability mentioned there should be heeded.

DateField

class DateField(auto_now=False, auto_now_add=False, **options)

A date, represented in Python by a datetime.date instance. Has a few extra, optional arguments:

DateField.auto_now

Automatically set the field to now every time the object is saved. Useful for “last-modified” timestamps. Note that the current date is always used; it’s not just a default value that you can override.

The field is only automatically updated when calling Model.save(). The field isn’t updated when making updates to other fields in other ways such as QuerySet.update(), though you can specify a custom value for the field in an update like that.

DateField.auto_now_add

Automatically set the field to now when the object is first created. Useful for creation of timestamps. Note that the current date is always used; it’s not just a default value that you can override. So even if you set a value for this field when creating the object, it will be ignored. If you want to be able to modify this field, set the following instead of auto_now_add=True:

• For DateField: default=date.today - from datetime.date.today()
• For DateTimeField: default=timezone.now - from django.utils.timezone.now()

The default form widget for this field is a TextInput. The admin adds a JavaScript calendar, and a shortcut for “Today”. Includes an additional invalid_date error message key.

The options auto_now_add, auto_now, and default are mutually exclusive. Any combination of these options will result in an error.

Note

As currently implemented, setting auto_now or auto_now_add to True will cause the field to have editable=False and blank=True set.

Note

The auto_now and auto_now_add options will always use the date in the default timezone at the moment of creation or update. If you need something different, you may want to consider simply using your own callable default or overriding save() instead of using auto_now or auto_now_add; or using a DateTimeField instead of a DateField and deciding how to handle the conversion from datetime to date at display time.

DateTimeField

class DateTimeField(auto_now=False, auto_now_add=False, **options)

A date and time, represented in Python by a datetime.datetime instance. Takes the same extra arguments as DateField.

The default form widget for this field is a single TextInput. The admin uses two separate TextInput widgets with JavaScript shortcuts.

DecimalField

class DecimalField(max_digits=None, decimal_places=None, **options)

A fixed-precision decimal number, represented in Python by a Decimal instance. Has two required arguments:

DecimalField.max_digits

The maximum number of digits allowed in the number. Note that this number must be greater than or equal to decimal_places.

DecimalField.decimal_places

The number of decimal places to store with the number.

For example, to store numbers up to 999 with a resolution of 2 decimal places, you’d use:

models.DecimalField(..., max_digits=5, decimal_places=2)

And to store numbers up to approximately one billion with a resolution of 10 decimal places:

models.DecimalField(..., max_digits=19, decimal_places=10)

The default form widget for this field is a NumberInput when localize is False or TextInput otherwise.

Note

For more information about the differences between the FloatField and DecimalField classes, please see FloatField vs. DecimalField.

DurationField

class DurationField(**options)

A field for storing periods of time - modeled in Python by timedelta. When used on PostgreSQL, the data type used is an interval and on Oracle the data type is INTERVAL DAY(9) TO SECOND(6). Otherwise a bigint of microseconds is used.

Note

Arithmetic with DurationField works in most cases. However on all databases other than PostgreSQL, comparing the value of a DurationField to arithmetic on DateTimeField instances will not work as expected.

EmailField

class EmailField(max_length=254, **options)

A CharField that checks that the value is a valid email address. It uses EmailValidator to validate the input.

FileField

class FileField(upload_to=None, max_length=100, **options)

A file-upload field.

Note

The primary_key argument isn’t supported and will raise a an error if used.

Has two optional arguments:

FileField.upload_to

This attribute provides a way of setting the upload directory and file name, and can be set in two ways. In both cases, the value is passed to the Storage.save() method.

If you specify a string value, it may contain strftime() formatting, which will be replaced by the date/time of the file upload (so that uploaded files don’t fill up the given directory). For example:

class MyModel(models.Model):
    # file will be uploaded to MEDIA_ROOT/uploads
    upload = models.FileField(upload_to='uploads/')
    # or...
    # file will be saved to MEDIA_ROOT/uploads/2015/01/30
    upload = models.FileField(upload_to='uploads/%Y/%m/%d/')

If you are using the default FileSystemStorage, the string value will be appended to your MEDIA_ROOT path to form the location on the local filesystem where uploaded files will be stored. If you are using a different storage, check that storage’s documentation to see how it handles upload_to.

upload_to may also be a callable, such as a function. This will be called to obtain the upload path, including the filename. This callable must accept two arguments and return a Unix-style path (with forward slashes) to be passed along to the storage system. The two arguments are:

Argument	Description
instance	An instance of the model where the FileField is defined. More specifically, this is the particular instance where the current file is being attached. In most cases, this object will not have been saved to the database yet, so if it uses the default AutoField, it might not yet have a value for its primary key field.
filename	The filename that was originally given to the file. This may or may not be taken into account when determining the final destination path.

For example:

def user_directory_path(instance, filename):
    # file will be uploaded to MEDIA_ROOT/user_<id>/<filename>
    return 'user_{0}/{1}'.format(instance.user.id, filename)

class MyModel(models.Model):
    upload = models.FileField(upload_to=user_directory_path)

FileField.storage

A storage object, which handles the storage and retrieval of your files. See Managing files for details on how to provide this object.

The default form widget for this field is a ClearableFileInput.

Using a FileField or an ImageField (see below) in a model takes a few steps:

1. In your settings file, you’ll need to define MEDIA_ROOT as the full path to a directory where you’d like Django to store uploaded files. (For performance, these files are not stored in the database.) Define MEDIA_URL as the base public URL of that directory. Make sure that this directory is writable by the Web server’s user account.
2. Add the FileField or ImageField to your model, defining the upload_to option to specify a subdirectory of MEDIA_ROOT to use for uploaded files.
3. All that will be stored in your database is a path to the file (relative to MEDIA_ROOT). You’ll most likely want to use the convenience url attribute provided by Django. For example, if your ImageField is called mug_shot, you can get the absolute path to your image in a template with {{ object.mug_shot.url }}.

For example, say your MEDIA_ROOT is set to '/home/media', and upload_to is set to 'photos/%Y/%m/%d'. The '%Y/%m/%d' part of upload_to is strftime() formatting; '%Y' is the four-digit year, '%m' is the two-digit month and '%d' is the two-digit day. If you upload a file on Jan. 15, 2007, it will be saved in the directory /home/media/photos/2007/01/15.

If you wanted to retrieve the uploaded file’s on-disk filename, or the file’s size, you could use the name and size attributes respectively; for more information on the available attributes and methods, see the File class reference and the Managing files topic guide.

Note

The file is saved as part of saving the model in the database, so the actual file name used on disk cannot be relied on until after the model has been saved.

The uploaded file’s relative URL can be obtained using the url attribute. Internally, this calls the url() method of the underlying Storage class.

Note that whenever you deal with uploaded files, you should pay close attention to where you’re uploading them and what type of files they are, to avoid security holes. Validate all uploaded files so that you’re sure the files are what you think they are. For example, if you blindly let somebody upload files, without validation, to a directory that’s within your Web server’s document root, then somebody could upload a CGI or PHP script and execute that script by visiting its URL on your site. Don’t allow that.

Also note that even an uploaded HTML file, since it can be executed by the browser (though not by the server), can pose security threats that are equivalent to XSS or CSRF attacks.

FileField instances are created in your database as varchar columns with a default max length of 100 characters. As with other fields, you can change the maximum length using the max_length argument.

FileField and FieldFile

class FieldFile

When you access a FileField on a model, you are given an instance of FieldFile as a proxy for accessing the underlying file.

The API of FieldFile mirrors that of File, with one key difference: The object wrapped by the class is not necessarily a wrapper around Python’s built-in file object. Instead, it is a wrapper around the result of the Storage.open() method, which may be a File object, or it may be a custom storage’s implementation of the File API.

In addition to the API inherited from File such as read() and write(), FieldFile includes several methods that can be used to interact with the underlying file:

Warning

Two methods of this class, save() and delete(), default to saving the model object of the associated FieldFile in the database.

FieldFile.name

The name of the file including the relative path from the root of the Storage of the associated FileField.

FieldFile.size

The result of the underlying Storage.size() method.

FieldFile.url

A read-only property to access the file’s relative URL by calling the url() method of the underlying Storage class.

FieldFile.open(mode='rb')

Opens or reopens the file associated with this instance in the specified mode. Unlike the standard Python open() method, it doesn’t return a file descriptor.

Since the underlying file is opened implicitly when accessing it, it may be unnecessary to call this method except to reset the pointer to the underlying file or to change the mode.

FieldFile.close()

Behaves like the standard Python file.close() method and closes the file associated with this instance.

FieldFile.save(name, content, save=True)

This method takes a filename and file contents and passes them to the storage class for the field, then associates the stored file with the model field. If you want to manually associate file data with FileField instances on your model, the save() method is used to persist that file data.

Takes two required arguments: name which is the name of the file, and content which is an object containing the file’s contents. The optional save argument controls whether or not the model instance is saved after the file associated with this field has been altered. Defaults to True.

Note that the content argument should be an instance of django.core.files.File, not Python’s built-in file object. You can construct a File from an existing Python file object like this:

from django.core.files import File
# Open an existing file using Python's built-in open()
f = open('/path/to/hello.world')
myfile = File(f)

Or you can construct one from a Python string like this:

from django.core.files.base import ContentFile
myfile = ContentFile("hello world")

For more information, see Managing files.

FieldFile.delete(save=True)

Deletes the file associated with this instance and clears all attributes on the field. Note: This method will close the file if it happens to be open when delete() is called.

The optional save argument controls whether or not the model instance is saved after the file associated with this field has been deleted. Defaults to True.

Note that when a model is deleted, related files are not deleted. If you need to cleanup orphaned files, you’ll need to handle it yourself (for instance, with a custom management command that can be run manually or scheduled to run periodically via e.g. cron).

FilePathField

class FilePathField(path=None, match=None, recursive=False, max_length=100, **options)

A CharField whose choices are limited to the filenames in a certain directory on the filesystem. Has three special arguments, of which the first is required:

FilePathField.path

Required. The absolute filesystem path to a directory from which this FilePathField should get its choices. Example: "/home/images".

FilePathField.match

Optional. A regular expression, as a string, that FilePathField will use to filter filenames. Note that the regex will be applied to the base filename, not the full path. Example: "foo.*\.txt$", which will match a file called foo23.txt but not bar.txt or foo23.png.

FilePathField.recursive

Optional. Either True or False. Default is False. Specifies whether all subdirectories of path should be included

FilePathField.allow_files

Optional. Either True or False. Default is True. Specifies whether files in the specified location should be included. Either this or allow_folders must be True.

FilePathField.allow_folders

Optional. Either True or False. Default is False. Specifies whether folders in the specified location should be included. Either this or allow_files must be True.

Of course, these arguments can be used together.

The one potential gotcha is that match applies to the base filename, not the full path. So, this example:

FilePathField(path="/home/images", match="foo.*", recursive=True)

…will match /home/images/foo.png but not /home/images/foo/bar.png because the match applies to the base filename (foo.png and bar.png).

FilePathField instances are created in your database as varchar columns with a default max length of 100 characters. As with other fields, you can change the maximum length using the max_length argument.

FloatField

class FloatField(**options)

A floating-point number represented in Python by a float instance.

The default form widget for this field is a NumberInput when localize is False or TextInput otherwise.

FloatField vs. DecimalField

The FloatField class is sometimes mixed up with the DecimalField class. Although they both represent real numbers, they represent those numbers differently. FloatField uses Python’s float type internally, while DecimalField uses Python’s Decimal type. For information on the difference between the two, see Python’s documentation for the decimal module.

ImageField

class ImageField(upload_to=None, height_field=None, width_field=None, max_length=100, **options)

Inherits all attributes and methods from FileField, but also validates that the uploaded object is a valid image.

In addition to the special attributes that are available for FileField, an ImageField also has height and width attributes.

To facilitate querying on those attributes, ImageField has two extra optional arguments:

ImageField.height_field

Name of a model field which will be auto-populated with the height of the image each time the model instance is saved.

ImageField.width_field

Name of a model field which will be auto-populated with the width of the image each time the model instance is saved.

Requires the Pillow library.

ImageField instances are created in your database as varchar columns with a default max length of 100 characters. As with other fields, you can change the maximum length using the max_length argument.

The default form widget for this field is a ClearableFileInput.

IntegerField

class IntegerField(**options)

An integer. Values from -2147483648 to 2147483647 are safe in all databases supported by Django. The default form widget for this field is a NumberInput when localize is False or TextInput otherwise.

GenericIPAddressField

class GenericIPAddressField(protocol='both', unpack_ipv4=False, **options)

An IPv4 or IPv6 address, in string format (e.g. 192.0.2.30 or 2a02:42fe::4). The default form widget for this field is a TextInput.

The IPv6 address normalization follows RFC 4291#section-2.2 section 2.2, including using the IPv4 format suggested in paragraph 3 of that section, like ::ffff:192.0.2.0. For example, 2001:0::0:01 would be normalized to 2001::1, and ::ffff:0a0a:0a0a to ::ffff:10.10.10.10. All characters are converted to lowercase.

GenericIPAddressField.protocol

Limits valid inputs to the specified protocol. Accepted values are 'both' (default), 'IPv4' or 'IPv6'. Matching is case insensitive.

GenericIPAddressField.unpack_ipv4

Unpacks IPv4 mapped addresses like ::ffff:192.0.2.1. If this option is enabled that address would be unpacked to 192.0.2.1. Default is disabled. Can only be used when protocol is set to 'both'.

If you allow for blank values, you have to allow for null values since blank values are stored as null.

NullBooleanField

class NullBooleanField(**options)

Like a BooleanField, but allows NULL as one of the options. Use this instead of a BooleanField with null=True. The default form widget for this field is a NullBooleanSelect.

PositiveIntegerField

class PositiveIntegerField(**options)

Like an IntegerField, but must be either positive or zero (0). Values from 0 to 2147483647 are safe in all databases supported by Django. The value 0 is accepted for backward compatibility reasons.

PositiveSmallIntegerField

class PositiveSmallIntegerField(**options)

Like a PositiveIntegerField, but only allows values under a certain (database-dependent) point. Values from 0 to 32767 are safe in all databases supported by Django.

SlugField

class SlugField(max_length=50, **options)

Slug is a newspaper term. A slug is a short label for something, containing only letters, numbers, underscores or hyphens. They’re generally used in URLs.

Like a CharField, you can specify max_length (read the note about database portability and max_length in that section, too). If max_length is not specified, Django will use a default length of 50.

Implies setting Field.db_index to True.

It is often useful to automatically prepopulate a SlugField based on the value of some other value. You can do this automatically in the admin using prepopulated_fields.

SlugField.allow_unicode

If True, the field accepts Unicode letters in addition to ASCII letters. Defaults to False.

SmallIntegerField

class SmallIntegerField(**options)

Like an IntegerField, but only allows values under a certain (database-dependent) point. Values from -32768 to 32767 are safe in all databases supported by Django.

TextField

class TextField(**options)

A large text field. The default form widget for this field is a Textarea.

If you specify a max_length attribute, it will be reflected in the Textarea widget of the auto-generated form field. However it is not enforced at the model or database level. Use a CharField for that.

TimeField

class TimeField(auto_now=False, auto_now_add=False, **options)

A time, represented in Python by a datetime.time instance. Accepts the same auto-population options as DateField.

The default form widget for this field is a TextInput. The admin adds some JavaScript shortcuts.

URLField

class URLField(max_length=200, **options)

A CharField for a URL.

The default form widget for this field is a TextInput.

Like all CharField subclasses, URLField takes the optional max_length argument. If you don’t specify max_length, a default of 200 is used.

UUIDField

class UUIDField(**options)

A field for storing universally unique identifiers. Uses Python’s UUID class. When used on PostgreSQL, this stores in a uuid datatype, otherwise in a char(32).

Universally unique identifiers are a good alternative to AutoField for primary_key. The database will not generate the UUID for you, so it is recommended to use default:

import uuid
from django.db import models

class MyUUIDModel(models.Model):
    id = models.UUIDField(primary_key=True, default=uuid.uuid4, editable=False)
    # other fields

Note that a callable (with the parentheses omitted) is passed to default, not an instance of UUID.

Relationship fields

Django also defines a set of fields that represent relations.

ForeignKey

class ForeignKey(to, on_delete, **options)

A many-to-one relationship. Requires two positional arguments: the class to which the model is related and the on_delete option. (on_delete isn’t actually required, but not providing it gives a deprecation warning. It will be required in Django 2.0.)

To create a recursive relationship – an object that has a many-to-one relationship with itself – use models.ForeignKey('self', on_delete=models.CASCADE).

If you need to create a relationship on a model that has not yet been defined, you can use the name of the model, rather than the model object itself:

from django.db import models

class Car(models.Model):
    manufacturer = models.ForeignKey(
        'Manufacturer',
        on_delete=models.CASCADE,
    )
    # ...

class Manufacturer(models.Model):
    # ...
    pass

Relationships defined this way on abstract models are resolved when the model is subclassed as a concrete model and are not relative to the abstract model’s app_label:

products/models.py

from django.db import models

class AbstractCar(models.Model):
    manufacturer = models.ForeignKey('Manufacturer', on_delete=models.CASCADE)

    class Meta:
        abstract = True

production/models.py

from django.db import models
from products.models import AbstractCar

class Manufacturer(models.Model):
    pass

class Car(AbstractCar):
    pass

# Car.manufacturer will point to `production.Manufacturer` here.

To refer to models defined in another application, you can explicitly specify a model with the full application label. For example, if the Manufacturer model above is defined in another application called production, you’d need to use:

class Car(models.Model):
    manufacturer = models.ForeignKey(
        'production.Manufacturer',
        on_delete=models.CASCADE,
    )

This sort of reference, called a lazy relationship, can be useful when resolving circular import dependencies between two applications.

A database index is automatically created on the ForeignKey. You can disable this by setting db_index to False. You may want to avoid the overhead of an index if you are creating a foreign key for consistency rather than joins, or if you will be creating an alternative index like a partial or multiple column index.

Database Representation

Behind the scenes, Django appends "_id" to the field name to create its database column name. In the above example, the database table for the Car model will have a manufacturer_id column. (You can change this explicitly by specifying db_column) However, your code should never have to deal with the database column name, unless you write custom SQL. You’ll always deal with the field names of your model object.

Arguments

ForeignKey accepts other arguments that define the details of how the relation works.

ForeignKey.on_delete

When an object referenced by a ForeignKey is deleted, Django will emulate the behavior of the SQL constraint specified by the on_delete argument. For example, if you have a nullable ForeignKey and you want it to be set null when the referenced object is deleted:

user = models.ForeignKey(
    User,
    models.SET_NULL,
    blank=True,
    null=True,
)

Deprecated since version 1.9: on_delete will become a required argument in Django 2.0. In older versions it defaults to CASCADE.

The possible values for on_delete are found in django.db.models:

• CASCADE

  Cascade deletes. Django emulates the behavior of the SQL constraint ON DELETE CASCADE and also deletes the object containing the ForeignKey.

• PROTECT

  Prevent deletion of the referenced object by raising ProtectedError, a subclass of django.db.IntegrityError.

• SET_NULL

  Set the ForeignKey null; this is only possible if null is True.

• SET_DEFAULT

  Set the ForeignKey to its default value; a default for the ForeignKey must be set.

• SET()

  Set the ForeignKey to the value passed to SET(), or if a callable is passed in, the result of calling it. In most cases, passing a callable will be necessary to avoid executing queries at the time your models.py is imported:

  from django.conf import settings
  from django.contrib.auth import get_user_model
  from django.db import models
  
  def get_sentinel_user():
      return get_user_model().objects.get_or_create(username='deleted')[0]
  
  class MyModel(models.Model):
      user = models.ForeignKey(
          settings.AUTH_USER_MODEL,
          on_delete=models.SET(get_sentinel_user),
      )
  

• DO_NOTHING

  Take no action. If your database backend enforces referential integrity, this will cause an IntegrityError unless you manually add an SQL ON DELETE constraint to the database field.

ForeignKey.limit_choices_to

Sets a limit to the available choices for this field when this field is rendered using a ModelForm or the admin (by default, all objects in the queryset are available to choose). Either a dictionary, a Q object, or a callable returning a dictionary or Q object can be used.

For example:

staff_member = models.ForeignKey(
    User,
    on_delete=models.CASCADE,
    limit_choices_to={'is_staff': True},
)

causes the corresponding field on the ModelForm to list only Users that have is_staff=True. This may be helpful in the Django admin.

The callable form can be helpful, for instance, when used in conjunction with the Python datetime module to limit selections by date range. For example:

def limit_pub_date_choices():
    return {'pub_date__lte': datetime.date.utcnow()}

limit_choices_to = limit_pub_date_choices

If limit_choices_to is or returns a Q object, which is useful for complex queries, then it will only have an effect on the choices available in the admin when the field is not listed in raw_id_fields in the ModelAdmin for the model.

Note

If a callable is used for limit_choices_to, it will be invoked every time a new form is instantiated. It may also be invoked when a model is validated, for example by management commands or the admin. The admin constructs querysets to validate its form inputs in various edge cases multiple times, so there is a possibility your callable may be invoked several times.

ForeignKey.related_name

The name to use for the relation from the related object back to this one. It’s also the default value for related_query_name (the name to use for the reverse filter name from the target model). See the related objects documentation for a full explanation and example. Note that you must set this value when defining relations on abstract models; and when you do so some special syntax is available.

If you’d prefer Django not to create a backwards relation, set related_name to '+' or end it with '+'. For example, this will ensure that the User model won’t have a backwards relation to this model:

user = models.ForeignKey(
    User,
    on_delete=models.CASCADE,
    related_name='+',
)

ForeignKey.related_query_name

The name to use for the reverse filter name from the target model. It defaults to the value of related_name or default_related_name if set, otherwise it defaults to the name of the model:

# Declare the ForeignKey with related_query_name
class Tag(models.Model):
    article = models.ForeignKey(
        Article,
        on_delete=models.CASCADE,
        related_name="tags",
        related_query_name="tag",
    )
    name = models.CharField(max_length=255)

# That's now the name of the reverse filter
Article.objects.filter(tag__name="important")

Like related_name, related_query_name supports app label and class interpolation via some special syntax.

ForeignKey.to_field

The field on the related object that the relation is to. By default, Django uses the primary key of the related object. If you reference a different field, that field must have unique=True.

ForeignKey.db_constraint

Controls whether or not a constraint should be created in the database for this foreign key. The default is True, and that’s almost certainly what you want; setting this to False can be very bad for data integrity. That said, here are some scenarios where you might want to do this:

• You have legacy data that is not valid.
• You’re sharding your database.

If this is set to False, accessing a related object that doesn’t exist will raise its DoesNotExist exception.

ForeignKey.swappable

Controls the migration framework’s reaction if this ForeignKey is pointing at a swappable model. If it is True - the default - then if the ForeignKey is pointing at a model which matches the current value of settings.AUTH_USER_MODEL (or another swappable model setting) the relationship will be stored in the migration using a reference to the setting, not to the model directly.

You only want to override this to be False if you are sure your model should always point towards the swapped-in model - for example, if it is a profile model designed specifically for your custom user model.

Setting it to False does not mean you can reference a swappable model even if it is swapped out - False just means that the migrations made with this ForeignKey will always reference the exact model you specify (so it will fail hard if the user tries to run with a User model you don’t support, for example).

If in doubt, leave it to its default of True.

ManyToManyField

class ManyToManyField(to, **options)

A many-to-many relationship. Requires a positional argument: the class to which the model is related, which works exactly the same as it does for ForeignKey, including recursive and lazy relationships.

Related objects can be added, removed, or created with the field’s RelatedManager.

Database Representation

Behind the scenes, Django creates an intermediary join table to represent the many-to-many relationship. By default, this table name is generated using the name of the many-to-many field and the name of the table for the model that contains it. Since some databases don’t support table names above a certain length, these table names will be automatically truncated to 64 characters and a uniqueness hash will be used. This means you might see table names like author_books_9cdf4; this is perfectly normal. You can manually provide the name of the join table using the db_table option.

Arguments

ManyToManyField accepts an extra set of arguments – all optional – that control how the relationship functions.

ManyToManyField.related_name

Same as ForeignKey.related_name.

ManyToManyField.related_query_name

Same as ForeignKey.related_query_name.

ManyToManyField.limit_choices_to

Same as ForeignKey.limit_choices_to.

limit_choices_to has no effect when used on a ManyToManyField with a custom intermediate table specified using the through parameter.

ManyToManyField.symmetrical

Only used in the definition of ManyToManyFields on self. Consider the following model:

from django.db import models

class Person(models.Model):
    friends = models.ManyToManyField("self")

When Django processes this model, it identifies that it has a ManyToManyField on itself, and as a result, it doesn’t add a person_set attribute to the Person class. Instead, the ManyToManyField is assumed to be symmetrical – that is, if I am your friend, then you are my friend.

If you do not want symmetry in many-to-many relationships with self, set symmetrical to False. This will force Django to add the descriptor for the reverse relationship, allowing ManyToManyField relationships to be non-symmetrical.

ManyToManyField.through

Django will automatically generate a table to manage many-to-many relationships. However, if you want to manually specify the intermediary table, you can use the through option to specify the Django model that represents the intermediate table that you want to use.

The most common use for this option is when you want to associate extra data with a many-to-many relationship.

If you don’t specify an explicit through model, there is still an implicit through model class you can use to directly access the table created to hold the association. It has three fields to link the models.

If the source and target models differ, the following fields are generated:

• id: the primary key of the relation.
• <containing_model>_id: the id of the model that declares the ManyToManyField.
• <other_model>_id: the id of the model that the ManyToManyField points to.

If the ManyToManyField points from and to the same model, the following fields are generated:

• id: the primary key of the relation.
• from_<model>_id: the id of the instance which points at the model (i.e. the source instance).
• to_<model>_id: the id of the instance to which the relationship points (i.e. the target model instance).

This class can be used to query associated records for a given model instance like a normal model.

ManyToManyField.through_fields

Only used when a custom intermediary model is specified. Django will normally determine which fields of the intermediary model to use in order to establish a many-to-many relationship automatically. However, consider the following models:

from django.db import models

class Person(models.Model):
    name = models.CharField(max_length=50)

class Group(models.Model):
    name = models.CharField(max_length=128)
    members = models.ManyToManyField(
        Person,
        through='Membership',
        through_fields=('group', 'person'),
    )

class Membership(models.Model):
    group = models.ForeignKey(Group, on_delete=models.CASCADE)
    person = models.ForeignKey(Person, on_delete=models.CASCADE)
    inviter = models.ForeignKey(
        Person,
        on_delete=models.CASCADE,
        related_name="membership_invites",
    )
    invite_reason = models.CharField(max_length=64)

Membership has two foreign keys to Person (person and inviter), which makes the relationship ambiguous and Django can’t know which one to use. In this case, you must explicitly specify which foreign keys Django should use using through_fields, as in the example above.

through_fields accepts a 2-tuple ('field1', 'field2'), where field1 is the name of the foreign key to the model the ManyToManyField is defined on (group in this case), and field2 the name of the foreign key to the target model (person in this case).

When you have more than one foreign key on an intermediary model to any (or even both) of the models participating in a many-to-many relationship, you must specify through_fields. This also applies to recursive relationships when an intermediary model is used and there are more than two foreign keys to the model, or you want to explicitly specify which two Django should use.

Recursive relationships using an intermediary model are always defined as non-symmetrical – that is, with symmetrical=False – therefore, there is the concept of a “source” and a “target”. In that case 'field1' will be treated as the “source” of the relationship and 'field2' as the “target”.

ManyToManyField.db_table

The name of the table to create for storing the many-to-many data. If this is not provided, Django will assume a default name based upon the names of: the table for the model defining the relationship and the name of the field itself.

ManyToManyField.db_constraint

Controls whether or not constraints should be created in the database for the foreign keys in the intermediary table. The default is True, and that’s almost certainly what you want; setting this to False can be very bad for data integrity. That said, here are some scenarios where you might want to do this:

• You have legacy data that is not valid.
• You’re sharding your database.

It is an error to pass both db_constraint and through.

ManyToManyField.swappable

Controls the migration framework’s reaction if this ManyToManyField is pointing at a swappable model. If it is True - the default - then if the ManyToManyField is pointing at a model which matches the current value of settings.AUTH_USER_MODEL (or another swappable model setting) the relationship will be stored in the migration using a reference to the setting, not to the model directly.

You only want to override this to be False if you are sure your model should always point towards the swapped-in model - for example, if it is a profile model designed specifically for your custom user model.

If in doubt, leave it to its default of True.

ManyToManyField does not support validators.

null has no effect since there is no way to require a relationship at the database level.

OneToOneField

class OneToOneField(to, on_delete, parent_link=False, **options)

A one-to-one relationship. Conceptually, this is similar to a ForeignKey with unique=True, but the “reverse” side of the relation will directly return a single object.

This is most useful as the primary key of a model which “extends” another model in some way; Multi-table inheritance is implemented by adding an implicit one-to-one relation from the child model to the parent model, for example.

One positional argument is required: the class to which the model will be related. This works exactly the same as it does for ForeignKey, including all the options regarding recursive and lazy relationships.

If you do not specify the related_name argument for the OneToOneField, Django will use the lower-case name of the current model as default value.

With the following example:

from django.conf import settings
from django.db import models

class MySpecialUser(models.Model):
    user = models.OneToOneField(
        settings.AUTH_USER_MODEL,
        on_delete=models.CASCADE,
    )
    supervisor = models.OneToOneField(
        settings.AUTH_USER_MODEL,
        on_delete=models.CASCADE,
        related_name='supervisor_of',
    )

your resulting User model will have the following attributes:

>>> user = User.objects.get(pk=1)
>>> hasattr(user, 'myspecialuser')
True
>>> hasattr(user, 'supervisor_of')
True

A DoesNotExist exception is raised when accessing the reverse relationship if an entry in the related table doesn’t exist. For example, if a user doesn’t have a supervisor designated by MySpecialUser:

>>> user.supervisor_of
Traceback (most recent call last):
    ...
DoesNotExist: User matching query does not exist.

Additionally, OneToOneField accepts all of the extra arguments accepted by ForeignKey, plus one extra argument:

OneToOneField.parent_link

When True and used in a model which inherits from another concrete model, indicates that this field should be used as the link back to the parent class, rather than the extra OneToOneField which would normally be implicitly created by subclassing.

See One-to-one relationships for usage examples of OneToOneField.

Field API reference

class Field

Field is an abstract class that represents a database table column. Django uses fields to create the database table (db_type()), to map Python types to database (get_prep_value()) and vice-versa (from_db_value()).

A field is thus a fundamental piece in different Django APIs, notably, models and querysets.

In models, a field is instantiated as a class attribute and represents a particular table column, see Models. It has attributes such as null and unique, and methods that Django uses to map the field value to database-specific values.

A Field is a subclass of RegisterLookupMixin and thus both Transform and Lookup can be registered on it to be used in QuerySets (e.g. field_name__exact="foo"). All built-in lookups are registered by default.

All of Django’s built-in fields, such as CharField, are particular implementations of Field. If you need a custom field, you can either subclass any of the built-in fields or write a Field from scratch. In either case, see Writing custom model fields.

description

A verbose description of the field, e.g. for the django.contrib.admindocs application.

The description can be of the form:

description = _("String (up to %(max_length)s)")

where the arguments are interpolated from the field’s __dict__.

To map a Field to a database-specific type, Django exposes several methods:

get_internal_type()

Returns a string naming this field for backend specific purposes. By default, it returns the class name.

See Emulating built-in field types for usage in custom fields.

db_type(connection)

Returns the database column data type for the Field, taking into account the connection.

See Custom database types for usage in custom fields.

rel_db_type(connection)

New in Django 1.10.

Returns the database column data type for fields such as ForeignKey and OneToOneField that point to the Field, taking into account the connection.

See Custom database types for usage in custom fields.

There are three main situations where Django needs to interact with the database backend and fields:

• when it queries the database (Python value -> database backend value)
• when it loads data from the database (database backend value -> Python value)
• when it saves to the database (Python value -> database backend value)

When querying, get_db_prep_value() and get_prep_value() are used:

get_prep_value(value)

value is the current value of the model’s attribute, and the method should return data in a format that has been prepared for use as a parameter in a query.

See Converting Python objects to query values for usage.

get_db_prep_value(value, connection, prepared=False)

Converts value to a backend-specific value. By default it returns value if prepared=True and get_prep_value() if is False.

See Converting query values to database values for usage.

When loading data, from_db_value() is used:

from_db_value(value, expression, connection, context)

Converts a value as returned by the database to a Python object. It is the reverse of get_prep_value().

This method is not used for most built-in fields as the database backend already returns the correct Python type, or the backend itself does the conversion.

See Converting values to Python objects for usage.

Note

For performance reasons, from_db_value is not implemented as a no-op on fields which do not require it (all Django fields). Consequently you may not call super in your definition.

When saving, pre_save() and get_db_prep_save() are used:

get_db_prep_save(value, connection)

Same as the get_db_prep_value(), but called when the field value must be saved to the database. By default returns get_db_prep_value().

pre_save(model_instance, add)

Method called prior to get_db_prep_save() to prepare the value before being saved (e.g. for DateField.auto_now).

model_instance is the instance this field belongs to and add is whether the instance is being saved to the database for the first time.

It should return the value of the appropriate attribute from model_instance for this field. The attribute name is in self.attname (this is set up by Field).

See Preprocessing values before saving for usage.

Fields often receive their values as a different type, either from serialization or from forms.

to_python(value)

Converts the value into the correct Python object. It acts as the reverse of value_to_string(), and is also called in clean().

See Converting values to Python objects for usage.

Besides saving to the database, the field also needs to know how to serialize its value:

value_to_string(obj)

Converts obj to a string. Used to serialize the value of the field.

See Converting field data for serialization for usage.

When using model forms, the Field needs to know which form field it should be represented by:

formfield(form_class=None, choices_form_class=None, **kwargs)

Returns the default django.forms.Field of this field for ModelForm.

By default, if both form_class and choices_form_class are None, it uses CharField. If the field has choices and choices_form_class isn’t specified, it uses TypedChoiceField.

See Specifying the form field for a model field for usage.

deconstruct()

Returns a 4-tuple with enough information to recreate the field:

1. The name of the field on the model.
2. The import path of the field (e.g. "django.db.models.IntegerField"). This should be the most portable version, so less specific may be better.
3. A list of positional arguments.
4. A dict of keyword arguments.

This method must be added to fields prior to 1.7 to migrate its data using Migrations.

Field attribute reference

Every Field instance contains several attributes that allow introspecting its behavior. Use these attributes instead of isinstance checks when you need to write code that depends on a field’s functionality. These attributes can be used together with the Model._meta API to narrow down a search for specific field types. Custom model fields should implement these flags.

Attributes for fields

Field.auto_created

Boolean flag that indicates if the field was automatically created, such as the OneToOneField used by model inheritance.

Field.concrete

Boolean flag that indicates if the field has a database column associated with it.

Field.hidden

Boolean flag that indicates if a field is used to back another non-hidden field’s functionality (e.g. the content_type and object_id fields that make up a GenericForeignKey). The hidden flag is used to distinguish what constitutes the public subset of fields on the model from all the fields on the model.

Note

Options.get_fields() excludes hidden fields by default. Pass in include_hidden=True to return hidden fields in the results.

Field.is_relation

Boolean flag that indicates if a field contains references to one or more other models for its functionality (e.g. ForeignKey, ManyToManyField, OneToOneField, etc.).

Field.model

Returns the model on which the field is defined. If a field is defined on a superclass of a model, model will refer to the superclass, not the class of the instance.

Attributes for fields with relations

These attributes are used to query for the cardinality and other details of a relation. These attribute are present on all fields; however, they will only have boolean values (rather than None) if the field is a relation type (Field.is_relation=True).

Field.many_to_many

Boolean flag that is True if the field has a many-to-many relation; False otherwise. The only field included with Django where this is True is ManyToManyField.

Field.many_to_one

Boolean flag that is True if the field has a many-to-one relation, such as a ForeignKey; False otherwise.

Field.one_to_many

Boolean flag that is True if the field has a one-to-many relation, such as a GenericRelation or the reverse of a ForeignKey; False otherwise.

Field.one_to_one

Boolean flag that is True if the field has a one-to-one relation, such as a OneToOneField; False otherwise.

Field.related_model

Points to the model the field relates to. For example, Author in ForeignKey(Author, on_delete=models.CASCADE). The related_model for a GenericForeignKey is always None.

Last update:

Jun 14, 2020

« previous | up | next »