This document describes the use of the NTP Project's ntpdc program,
that can be used to query a Network Time Protocol (NTP) server and
display the time offset of the system clock relative to the server
clock. Run as root, it can correct the system clock to this offset as
well. It can be run as an interactive command or from a cron job.
This document applies to version 4.2.8p10 of ntpdc.
The program implements the SNTP protocol as defined by RFC 5905, the NTPv4 IETF specification.
By default, ntpdc writes the local data and time (i.e., not UTC) to the
standard output in the format:
1996-10-15 20:17:25.123 (+0800) +4.567 +/- 0.089 secs
where YYYY-MM-DD HH:MM:SS.SUBSEC is the local date and time, (+0800) is the local timezone adjustment (so we would add 8 hours and 0 minutes to convert the reported local time to UTC), and the +4.567 +/- 0.089 secs indicates the time offset and error bound of the system clock relative to the server clock.
ntpdc
is deprecated.
Please use
ntpq(1ntpqmdoc) instead - it can do everything
ntpdc
used to do, and it does so using a much more sane interface.
ntpdc
is a utility program used to query
ntpd(1ntpdmdoc)
about its
current state and to request changes in that state.
It uses NTP mode 7 control message formats described in the source code.
The program may
be run either in interactive mode or controlled using command line
arguments.
Extensive state and statistics information is available
through the
ntpdc
interface.
In addition, nearly all the
configuration options which can be specified at startup using
ntpd's configuration file may also be specified at run time using
ntpdc
This section was generated by AutoGen,
using the agtexi-cmd template and the option descriptions for the ntpdc program.
This software is released under the NTP license, <http://ntp.org/license>.
This is the automatically generated usage text for ntpdc.
The text printed is the same whether selected with the help option
(--help) or the more-help option (--more-help). more-help will print
the usage text by passing it through a pager program.
more-help is disabled on platforms without a working
fork(2) function. The PAGER environment variable is
used to select the program, defaulting to more. Both will exit
with a status code of 0.
ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p10-beta
Usage: ntpdc [ -<flag> [<val>] | --<name>[{=| }<val>] ]... [ host ...]
Flg Arg Option-Name Description
-4 no ipv4 Force IPv4 DNS name resolution
- prohibits the option 'ipv6'
-6 no ipv6 Force IPv6 DNS name resolution
- prohibits the option 'ipv4'
-c Str command run a command and exit
- may appear multiple times
-d no debug-level Increase debug verbosity level
- may appear multiple times
-D Num set-debug-level Set the debug verbosity level
- may appear multiple times
-i no interactive Force ntpq to operate in interactive mode
- prohibits these options:
command
listpeers
peers
showpeers
-l no listpeers Print a list of the peers
- prohibits the option 'command'
-n no numeric numeric host addresses
-p no peers Print a list of the peers
- prohibits the option 'command'
-s no showpeers Show a list of the peers
- prohibits the option 'command'
opt version output version information and exit
-? no help display extended usage information and exit
-! no more-help extended usage information passed thru pager
-> opt save-opts save the option state to a config file
-< Str load-opts load options from a config file
- disabled as '--no-load-opts'
- may appear multiple times
Options are specified by doubled hyphens and their name or by a single
hyphen and the flag character.
The following option preset mechanisms are supported:
- reading file $HOME/.ntprc
- reading file ./.ntprc
- examining environment variables named NTPDC_*
Please send bug reports to: <http://bugs.ntp.org, bugs@ntp.org>
This is the “force ipv4 dns name resolution” option.
This option has some usage constraints. It:
Force DNS resolution of following host names on the command line to the IPv4 namespace.
This is the “force ipv6 dns name resolution” option.
This option has some usage constraints. It:
Force DNS resolution of following host names on the command line to the IPv6 namespace.
This is the “run a command and exit” option. This option takes a string argument cmd.
This option has some usage constraints. It:
The following argument is interpreted as an interactive format command and is added to the list of commands to be executed on the specified host(s).
This is the “force ntpq to operate in interactive mode” option.
This option has some usage constraints. It:
Force ntpq to operate in interactive mode. Prompts will be written to the standard output and commands read from the standard input.
This is the “print a list of the peers” option.
This option has some usage constraints. It:
Print a list of the peers known to the server as well as a summary of their state. This is equivalent to the 'listpeers' interactive command.
This is the “numeric host addresses” option. Output all host addresses in dotted-quad numeric format rather than converting to the canonical host names.
This is the “print a list of the peers” option.
This option has some usage constraints. It:
Print a list of the peers known to the server as well as a summary of their state. This is equivalent to the 'peers' interactive command.
This is the “show a list of the peers” option.
This option has some usage constraints. It:
Print a list of the peers known to the server as well as a summary of their state. This is equivalent to the 'dmpeers' interactive command.
Any option that is not marked as not presettable may be preset by
loading values from configuration ("rc" or "ini") files, and values from environment variables named NTPDC and NTPDC_<OPTION_NAME>. <OPTION_NAME> must be one of
the options listed above in upper case and segmented with underscores.
The NTPDC variable will be tokenized and parsed like
the command line. The remaining variables are tested for existence and their
values are treated like option arguments.
libopts will search in 2 places for configuration files:
HOME, and PWD
are expanded and replaced when ntpdc runs.
For any of these that are plain files, they are simply processed.
For any that are directories, then a file named .ntprc is searched for
within that directory and processed.
Configuration files may be in a wide variety of formats. The basic format is an option name followed by a value (argument) on the same line. Values may be separated from the option name with a colon, equal sign or simply white space. Values may be continued across multiple lines by escaping the newline with a backslash.
Multiple programs may also share the same initialization file. Common options are collected at the top, followed by program specific segments. The segments are separated by lines like:
[NTPDC]
or by
<?program ntpdc>
Do not mix these styles within one configuration file.
Compound values and carefully constructed string values may also be specified using XML syntax:
<option-name>
<sub-opt>...<...>...</sub-opt>
</option-name>
yielding an option-name.sub-opt string value of
"...<...>..."
AutoOpts does not track suboptions. You simply note that it is a
hierarchicly valued option. AutoOpts does provide a means for searching
the associated name/value pair list (see: optionFindValue).
The command line options relating to configuration and/or usage help are:
Print the program version to standard out, optionally with licensing information, then exit 0. The optional argument specifies how much licensing detail to provide. The default is to print just the version. The licensing infomation may be selected with an option argument. Only the first letter of the argument is examined:
One of the following exit values will be returned:
The simplest use of this program is as an unprivileged command to check the current time, offset, and error in the local clock. For example:
ntpdc ntpserver.somewhere
With suitable privilege, it can be run as a command or in a
cron job to reset the local clock from a reliable server, like
the ntpdate and rdate commands.
For example:
ntpdc -a ntpserver.somewhere