Table of Contents
The Internet Domain Name System (DNS) consists of the syntax to specify the names of entities in the Internet in a hierarchical manner, the rules used for delegating authority over names, and the system implementation that actually maps names to Internet addresses. DNS data is maintained in a group of distributed hierarchical databases.
The Berkeley Internet Name Domain (BIND) implements a domain name server for a number of operating systems. This document provides basic information about the installation and care of the Internet Systems Consortium (ISC) BIND version 9 software package for system administrators.
This version of the manual corresponds to BIND version 9.4.
In this document, Section 1 introduces the basic DNS and BIND concepts. Section 2 describes resource requirements for running BIND in various environments. Information in Section 3 is task-oriented in its presentation and is organized functionally, to aid in the process of installing the BIND 9 software. The task-oriented section is followed by Section 4, which contains more advanced concepts that the system administrator may need for implementing certain options. Section 5 describes the BIND 9 lightweight resolver. The contents of Section 6 are organized as in a reference manual to aid in the ongoing maintenance of the software. Section 7 addresses security considerations, and Section 8 contains troubleshooting help. The main body of the document is followed by several appendices which contain useful reference information, such as a bibliography and historic information related to BIND and the Domain Name System.
In this document, we use the following general typographic conventions:
|
To describe: |
We use the style: |
|
a pathname, filename, URL, hostname, mailing list name, or new term or concept |
|
|
literal user input |
|
|
program output |
|
The following conventions are used in descriptions of the BIND configuration file:
|
To describe: |
We use the style: |
|
keywords |
|
|
variables |
|
|
Optional input |
[Text is enclosed in square brackets] |
The purpose of this document is to explain the installation and upkeep of the BIND (Berkeley Internet Name Domain) software package, and we begin by reviewing the fundamentals of the Domain Name System (DNS) as they relate to BIND.
The Domain Name System (DNS) is a hierarchical, distributed database. It stores information for mapping Internet host names to IP addresses and vice versa, mail routing information, and other data used by Internet applications.
Clients look up information in the DNS by calling a resolver library, which sends queries to one or more name servers and interprets the responses. The BIND 9 software distribution contains a name server, named, and two resolver libraries, liblwres and libbind.
The data stored in the DNS is identified by domain names that are organized as a tree according to organizational or administrative boundaries. Each node of the tree, called a domain, is given a label. The domain name of the node is the concatenation of all the labels on the path from the node to the root node. This is represented in written form as a string of labels listed from right to left and separated by dots. A label need only be unique within its parent domain.
For example, a domain name for a host at the
company Example, Inc. could be
ourhost.example.com,
where com is the
top level domain to which
ourhost.example.com belongs,
example is
a subdomain of com, and
ourhost is the
name of the host.
For administrative purposes, the name space is partitioned into areas called zones, each starting at a node and extending down to the leaf nodes or to nodes where other zones start. The data for each zone is stored in a name server, which answers queries about the zone using the DNS protocol.
The data associated with each domain name is stored in the form of resource records (RRs). Some of the supported resource record types are described in the section called “Types of Resource Records and When to Use Them”.
For more detailed information about the design of the DNS and the DNS protocol, please refer to the standards documents listed in the section called “Request for Comments (RFCs)”.
To properly operate a name server, it is important to understand the difference between a zone and a domain.
As stated previously, a zone is a point of delegation in the DNS tree. A zone consists of those contiguous parts of the domain tree for which a name server has complete information and over which it has authority. It contains all domain names from a certain point downward in the domain tree except those which are delegated to other zones. A delegation point is marked by one or more NS records in the parent zone, which should be matched by equivalent NS records at the root of the delegated zone.
For instance, consider the example.com
domain which includes names
such as host.aaa.example.com and
host.bbb.example.com even though
the example.com zone includes
only delegations for the aaa.example.com and
bbb.example.com zones. A zone can
map
exactly to a single domain, but could also include only part of a
domain, the rest of which could be delegated to other
name servers. Every name in the DNS
tree is a
domain, even if it is
terminal, that is, has no
subdomains. Every subdomain is a domain and
every domain except the root is also a subdomain. The terminology is
not intuitive and we suggest that you read RFCs 1033, 1034 and 1035
to
gain a complete understanding of this difficult and subtle
topic.
Though BIND is called a "domain name
server",
it deals primarily in terms of zones. The master and slave
declarations in the named.conf file
specify
zones, not domains. When you ask some other site if it is willing to
be a slave server for your domain, you are
actually asking for slave service for some collection of zones.
Each zone is served by at least one authoritative name server, which contains the complete data for the zone. To make the DNS tolerant of server and network failures, most zones have two or more authoritative servers, on different networks.
Responses from authoritative servers have the "authoritative answer" (AA) bit set in the response packets. This makes them easy to identify when debugging DNS configurations using tools like dig (the section called “Diagnostic Tools”).
The authoritative server where the master copy of the zone data is maintained is called the primary master server, or simply the primary. Typically it loads the zone contents from some local file edited by humans or perhaps generated mechanically from some other local file which is edited by humans. This file is called the zone file or master file.
In some cases, however, the master file may not be edited by humans at all, but may instead be the result of dynamic update operations.
The other authoritative servers, the slave servers (also known as secondary servers) load the zone contents from another server using a replication process known as a zone transfer. Typically the data are transferred directly from the primary master, but it is also possible to transfer it from another slave. In other words, a slave server may itself act as a master to a subordinate slave server.
Usually all of the zone's authoritative servers are listed in NS records in the parent zone. These NS records constitute a delegation of the zone from the parent. The authoritative servers are also listed in the zone file itself, at the top level or apex of the zone. You can list servers in the zone's top-level NS records that are not in the parent's NS delegation, but you cannot list servers in the parent's delegation that are not present at the zone's top level.
A stealth server is a server that is authoritative for a zone but is not listed in that zone's NS records. Stealth servers can be used for keeping a local copy of a zone to speed up access to the zone's records or to make sure that the zone is available even if all the "official" servers for the zone are inaccessible.
A configuration where the primary master server itself is a stealth server is often referred to as a "hidden primary" configuration. One use for this configuration is when the primary master is behind a firewall and therefore unable to communicate directly with the outside world.
The resolver libraries provided by most operating systems are stub resolvers, meaning that they are not capable of performing the full DNS resolution process by themselves by talking directly to the authoritative servers. Instead, they rely on a local name server to perform the resolution on their behalf. Such a server is called a recursive name server; it performs recursive lookups for local clients.
To improve performance, recursive servers cache the results of the lookups they perform. Since the processes of recursion and caching are intimately connected, the terms recursive server and caching server are often used synonymously.
The length of time for which a record may be retained in the cache of a caching name server is controlled by the Time To Live (TTL) field associated with each resource record.
Even a caching name server does not necessarily perform the complete recursive lookup itself. Instead, it can forward some or all of the queries that it cannot satisfy from its cache to another caching name server, commonly referred to as a forwarder.
There may be one or more forwarders, and they are queried in turn until the list is exhausted or an answer is found. Forwarders are typically used when you do not wish all the servers at a given site to interact directly with the rest of the Internet servers. A typical scenario would involve a number of internal DNS servers and an Internet firewall. Servers unable to pass packets through the firewall would forward to the server that can do it, and that server would query the Internet DNS servers on the internal server's behalf.
The BIND name server can simultaneously act as a master for some zones, a slave for other zones, and as a caching (recursive) server for a set of local clients.
However, since the functions of authoritative name service and caching/recursive name service are logically separate, it is often advantageous to run them on separate server machines. A server that only provides authoritative name service (an authoritative-only server) can run with recursion disabled, improving reliability and security. A server that is not authoritative for any zones and only provides recursive service to local clients (a caching-only server) does not need to be reachable from the Internet at large and can be placed inside a firewall.