VMS Help LANCP, Commands  *Conan The Librarian (sorry for the slow response - running on an old VAX)

    This section describes and provides examples of the LANCP
    commands. The following table summarizes the LANCP commands.

    Command                Function

    @ (Execute Procedure)  Executes a command procedure.
    CLEAR DLL              Clears MOP downline load counters for all
                           nodes and devices.
    CLEAR DEVICE           Deletes a device from the LAN volatile
                           device database.
    CLEAR MOPDLL           Same as the CLEAR DLL command.
    CLEAR NODE             Deletes a node from the LAN volatile node
                           database.
    CONNECT NODE           Connects to a LAN device, such as a
                           terminal server, that implements a
                           management interface using the MOP console
                           carrier protocol.
    CONVERT DEVICE_        Converts the device database to the format
    DATABASE               required by the current version of LANCP.
    CONVERT NODE_DATABASE  Converts the node database to the format
                           required by the current version of LANCP.
    DEFINE DEVICE          Enters a device into the LAN permanent
                           device database or modifies an existing
                           entry.
    DEFINE NODE            Enters a node into the LAN permanent node
                           database or modifies an existing entry.
    EXIT                   Stops execution of LANCP and returns
                           control to the DCL command level.
    HELP                   Provides online help information about the
                           LANCP utility.
    LIST DEVICE            Displays information in the LAN permanent
                           device database.
    LIST NODE              Displays information in the LAN permanent
                           node database.
    PURGE DEVICE           Deletes a device from the LAN permanent
                           device database.
    PURGE NODE             Deletes a node from the LAN permanent node
                           database.
    SET ACP                Modifies the operation of the LANACP LAN
                           Server process.
    SET DEVICE             Enters a device into the LAN volatile
                           device database or modifies an existing
                           entry and sets device parameters.
    SET NODE               Enters a node into the LAN volatile node
                           database or modifies an existing entry.
    SHOW CONFIGURATION     Displays a list of LAN devices on the
                           system.
    SHOW DEVICE            Displays information in the LAN volatile
                           device database and displays device data.
    SHOW DLL               Displays the current state of MOP downline
                           load services.
    SHOW LOG               Displays recent downline load activity.
    SHOW MOPDLL            Same as the SHOW DLL command.
    SHOW NODE              Displays information in the LAN volatile
                           node database.
    SPAWN                  Creates a subprocess of the current
                           process.
    TRIGGER NODE           Issues a request to reboot to a remote
                           node.