VMS Help ANALYZE, /ERROR_LOG, Examples  *Conan The Librarian (sorry for the slow response - running on an old VAX)

    1. $ ANALYZE/ERROR_LOG/BEFORE=19-APR-2000:10:00 ERRLOG.OLD;5

    In this example, the error log report generated for ERRLOG.OLD;5
    contains entries that were logged before 10:00 a.m on April 19, 2000.

    2. $ ANALYZE/ERROR_LOG/INCLUDE=DBA1/BINARY=DBA1_ERR.DAT ERRLOG.OLD;5

    In this example, the output file DBA1_ERR.DAT contains image
    copies of the entries that apply to DBA1.

    3. $ ANALYZE/ERROR_LOG/BRIEF ERRLOG.OLD;97

    In this example, the error log report generated from
    ERRLOG.OLD;97 contains minimal information.

    4. $ ANALYZE/ERROR_LOG/ENTRY=(START:1,END:18) ERRLOG.SYS

    In this example, the entry range for the error log report
    generated from file ERRLOG.SYS is limited to entry numbers 1
    through 18.

    5. $ ANALYZE/ERROR_LOG/EXCLUDE=MTA0

    In this example, the error log entries for the device MTA0 are
    excluded from the error log report for the file ERRLOG.SYS.

    6. $ ANALYZE/ERROR_LOG/EXCLUDE=(MTA0,DRA5) ERRLOG.OLD

    In this example, the devices MTA0 and DRA5 are excluded from the
    error log report for the file ERRLOG.OLD.

    7. $ ANALYZE/ERROR_LOG/EXCLUDE=TAPES/INCLUDE=MTA0

    In this example, the device MTA0 is included in the error log
    report for the file ERRLOG.SYS. All other magnetic tape devices
    are excluded from the report.

    8. $ ANALYZE/ERROR_LOG/INCLUDE=(DISK,VOLUME_CHANGES, -)
       _$ DEVICE_ERROR,BUGCHECK

    In this example, the report consists of error log entries for
    volume and device error information on disks, and bugcheck
    errors. These entries are in the default error log file
    ERRLOG.SYS.

    9. $ ANALYZE/ERROR_LOG/MODEL=415 ERRLOG.SYS

    In this example, the output consists of only those entries
    that were logged for the system with a model type of 00000415
    (hexadecimal).

    10. $ ANALYZE/ERROR_LOG/NODE=(ORANGE,NASSAU) -
        _$ SYS$SYSROOT:[SYS*.SYSERR]ERRLOG.SYS

    In this example, the OpenVMS Cluster system consists of members
    BROOME, NASSAU, ORANGE, and PUTNAM. The output contains only
    those entries that were logged for nodes NASSAU and ORANGE.

    11. $ ANALYZE/ERROR_LOG/INCLUDE=DB/REGISTER_DUMP ERRLOG.OLD;72

    In this example, the output is in the format of a REGISTER_DUMP
    report containing entries that apply only to the DB device.

    12. $ ANALYZE/ERROR_LOG/INCLUDE=MTA0 -
       _$ /REJECTED=REAL_ERRS.DAT ERRLOG.OLD;5

    In this example, the output file REAL_ERRS.DAT contains image
    copies of all entries from ERRLOG.OLD;5, with the exception of
    those entries that apply to the MTA0 device.

    13. $ ANALYZE/ERROR_LOG/SID_REGISTER=02006148 ERRLOG.OLD;72

    The /SID_REGISTER qualifier is for VAX only. In this example,
    the output consists of only those entries that were logged for
    the system with an ID of 02006148 (hexadecimal).

    14. $ ANALYZE/ERROR_LOG/STATISTICS ERRLOG.OLD;4

    In this example, the output generated by this command consists
    of a full report of all entries in ERRLOG.OLD;4 and the run-time
    statistics for the execution of the command.

    15. $ ANALYZE/ERROR_LOG/INCLUDE=DBA4/NOFULL/SUMMARY ERRLOG.OLD;5

    The /SUMMARY qualifier is for VAX only. The output generated
    by the command in this example includes the summary report. The
    report contains the entries that apply to the DBA4 device: device
    error, device timeout, and device attention.