VMS Help System Services, $SET PROCESS PROPERTIESW (Alpha Only)  *Conan The Librarian (sorry for the slow response - running on an old VAX)

    Sets a simple value associated with a process.

    Format

      SYS$SET_PROCESS_PROPERTIESW  mbz1 ,mbz2 ,mbz3 ,property ,value

                                   ,prev_value

    C Prototype:

      int sys$set_process_propertiesw  (unsigned int mbz1, unsigned

                                       int mbz2, unsigned int

                                       mbz3, unsigned int property,

                                       unsigned __int64 value,

                                       unsigned __int64 *prev_value);

1 - Arguments

 mbz1,mbz2,mbz3

    type:
    access:
    mechanism:    0
    Reserved for future use by Compaq. Must be specified as 0.

 property

    OpenVMS usage:integer
    type:         longword (unsigned)
    access:       read only
    mechanism:    by value
    A constant that selects which property to set.

    Valid values for property are defined by the $PPROPDEF macro as
    follows:

    Property Code          Description

    PPROP$C_HOME_RAD:      The Resource Affinity Domain (RAD) to
                           which the process is assigned. Newly
                           mapped memory in the process will
                           come from the home RAD of the process.
                           Currently mapped memory will not move into
                           the new home RAD unless $PURGWS is issued.
                           Valid values are integers between 0 and
                           the maximum RAD on the system. Valid home
                           RADs must also contain either memory or
                           CPUs.

                           Note: OpenVMS support for RADs is
                           available only on the new AlphaServer
                           GS series systems. For more information
                           about using RADs, refer to the OpenVMS
                           Alpha Partitioning and Galaxy Guide.
    PPROP$C_PARSE_STYLE_   The type of command parsing to use. This
    TEMP:                  value is set only for the life of the
                           image. The value reverts to the permanent
                           style on image rundown. Valid values
                           are: PARSE_STYLE$C_TRADITIONAL and PARSE_
                           STYLE$C_EXTENDED.
    PPROP$C_PARSE_STYLE_   The type of command parsing to use. This
    PERM:                  value is set for the life of the process
                           unless the style is set again. Valid
                           values are: PARSE_STYLE$C_TRADITIONAL
                           and PARSE_STYLE$C_EXTENDED.

 value

    OpenVMS usage:integer
    type:         quadword (unsigned)
    access:       read
    mechanism:    by value
    New property value.

 prev_value

    OpenVMS usage:access_mode
    type:         quadword (unsigned) address of a quadword value
    access:       write
    mechanism:    by reference
    The address of a quadword that will receive the previous value of
    the property.