VMS Help SHOW, DEVICES, /SERVED, Qualifiers  *Conan The Librarian (sorry for the slow response - running on an old VAX)

1 - /ALL

    This qualifier displays the information displayed by all of the
    qualifiers listed below except the /OUTPUT qualifier.

2 - /COUNT

    Displays the number of transfer operations completed, sorted by
    the size of the transfers, and the number of MSCP operations that
    have taken place since the MSCP server was started.

3 - /EXACT

    Use with the /PAGE=SAVE and /SEARCH qualifiers to specify a
    search string that must match the search string exactly and must
    be enclosed with quotation marks (" ").

    If you specify the /EXACT qualifier without the /SEARCH
    qualifier, exact search mode is enabled when you set the search
    string with the Find (E1) key.

4 - /HIGHLIGHT

       /HIGHLIGHT[=keyword]

    Use with the /PAGE=SAVE and /SEARCH qualifiers to specify the
    type of highlighting you want when a search string is found. When
    a string is found, the entire line is highlighted. You can use
    the following keywords: BOLD, BLINK, REVERSE, and UNDERLINE. BOLD
    is the default highlighting.

5 - /HOST

    Displays the names of the processors that have MSCP served
    devices on line. The System Generation utility (SYSGEN) command
    MSCP/HOST determines how many hosts in the OpenVMS Cluster can
    connect to the MSCP server at one time.

6 - /OUTPUT

       /OUTPUT=[filespec]

    Redirects output from your terminal to the specified file. If
    you do not specify a file, or if you do not use this qualifier,
    output is sent to SYS$OUTPUT.

7 - /PAGE

       /PAGE[=keyword]
       /NOPAGE (default)

    Controls the display of device information on the screen.

    You can use the following keywords with the /PAGE qualifier:

    CLEAR_SCREEN   Clears the screen before each page is displayed.

    SCROLL         Displays information one line at a time.

    SAVE[=n]       Enables screen navigation of information, where n
                   is the number of pages to store.

    The /PAGE=SAVE qualifier allows you to navigate through screens
    of information. The /PAGE=SAVE qualifier stores up to 5 screens
    of up to 255 columns of information. When you use the /PAGE=SAVE
    qualifier, you can use the following keys to navigate through the
    information:

    Key Sequence              Description

    Up arrow key, Ctrl/B      Scroll up one line.
    Down arrow key            Scroll down one line.
    Left arrow key            Scroll left one column.
    Right arrow key           Scroll right one column.
    Find (E1)                 Specify a string to find when the
                              information is displayed.
    Insert Here (E2)          Scroll right one half screen.
    Remove (E3)               Scroll left one half screen.
    Select (E4)               Toggle 80/132 column mode.
    Prev Screen (E5)          Get the previous page of information.
    Next Screen (E6),         Get the next page of information.
    Return, Enter, Space
    F10, Ctrl/Z               Exit. (Some utilities define these
                              differently.)
    Help (F15)                Display utility help text.
    Do (F16)                  Toggle the display to oldest/newest
                              page.
    Ctrl/W                    Refresh the display.

    The /PAGE qualifier is not compatible with the /OUTPUT qualifier.

8 - /RESOURCE

    Displays information about the resources available to the MSCP
    server for use in processing I/O requests for the devices it
    serves.

    You make these resources available by using the following system
    parameters: MSCP_BUFFER, MSCP_CREDITS, MSCP_LOAD, and MSCP_SERVE_
    ALL.

    Refer to OpenVMS Cluster Systems or SYSGEN online help for more
    information.

9 - /SEARCH

       /SEARCH="string"

    Use with the /PAGE=SAVE qualifier to specify a string that you
    want to find in the information being displayed. Quotation marks
    are required for the /SEARCH qualifier, if you include spaces in
    the text string.

    You can also dynamically change the search string by pressing the
    Find key (E1) while the information is being displayed. Quotation
    marks are not required for a dynamic search.