LOCALE
*Conan The Librarian (sorry for the slow response - running on an old VAX)
|
VMS Help LOCALE *Conan The Librarian (sorry for the slow response - running on an old VAX) |
|
An OpenVMS XPG4 localization utility that:
o Compiles a binary locale file (LOCALE COMPILE).
o Loads a locale name into system memory as shared, read-only
global data (LOCALE LOAD).
o Displays details of locales on your system (LOCALE SHOW).
o Unloads a locale name from system memory (LOCALE UNLOAD).
For more information on the XPG4 utilities, including file
formats, see the Compaq C Run-Time Library Reference Manual.
Also see help for the related commands GENCAT and ICONV.
Format:
LOCALE option
| 1 - COMPILE |
Converts a locale source file into a binary locale file. The
binary locale file is used by utilities and C routines that are
dependent on the setting of the international environment logical
names.
Format:
LOCALE COMPILE sourcefile
1.1 - Parameter
sourcefile
The file specification of the locale source file. This file
defines each category of the locale. The default file type for
the source file is .LSRC.
1.2 - Qualifiers
1. 2.1 - /CHARACTER_DEFINITIONS
/[NO]CHARACTER_DEFINITIONS[=filename]
/NOCHARACTER_DEFINITIONS (D)
Specifies a character-set description file (charmap) for the
locale. This file maps characters to their actual character
encodings. If a charmap is not specified, no symbolic names
(other than collating symbols defined in a collating symbol
keyword) are allowed in the locale source file. The default file
type for a charmap is .CMAP.
1. 2.2 - /DISPLAY
/DISPLAY[=[NO]HOLE]
/DISPLAY=NOHOLE (D)
Used with certain Chinese locales and terminals to
specify that 4-byte characters occupy four printing
positions (columns) on the terminal display. The default
value (/DISPLAY=NOHOLE) specifies that 4-byte characters
occupy two printing positions.
1. 2.3 - /IGNORE=WARNINGS
/[NO]IGNORE=WARNINGS
/NOIGNORE=WARNINGS (D)
Generates an output file even if LOCALE COMPILE issues warning
messages. Use the /IGNORE qualifier with caution because warning
messages can indicate user errors that you might want to fix
before using the resulting locale file.
1. 2.4 - /LISTING
/[NO]LISTING[=filename]
/LISTING[=filename] (Batch Default)
/NOLISTING (Interactive Default)
Specifies the name of the listing file. The /SHOW qualifier
controls the information included in the listing file. If the
filename is omitted, the default is sourcefile.LIS.
1. 2.5 - /OUTPUT
/[NO]OUTPUT[=filename]
/NOOUTPUT (D)
Specifies the name of the output file. If the /OUTPUT qualifier
is omitted, the default output filename is sourcefile.LOCALE.
Public locales are stored in the directory defined by the logical
name SYS$I18N_LOCALE. If the output file is in any other
location, the locale is private.
If /NOOUTPUT is specified, the compiler does not create an output
file, even if the compilation is successful.
1. 2.6 - /SHOW
/SHOW[=(keyword[,...])])
/SHOW=(SOURCE,TERMINAL) (D)
Use /SHOW together with /LIST to control the information included
in the listing file. You can specify the following keywords:
ALL Include all information.
BRIEF Include a summary of the symbol table.
[NO]CHARACTER_DEFINITIONS Include/omit the charmap file.
NONE Do not print any information. If NONE
is specified, the listing file only
contains the error messages generated.
[NO]SOURCE Include/omit a listing of the source
file.
[NO]STATISTICS Include/omit compiler performance
information.
[NO]SYMBOLS Include/omit a listing of the charmap
symbol table.
[NO]TERMINAL Display compiler messages at the
terminal.
| 2 - LOAD |
Loads the specified locale name into the system memory as shared,
read-only global data.
LOCALE LOAD is a privileged OpenVMS command, typically issued by
the system manager, and requiring the following privileges:
o SYSGBL
o PRMGBL
Format:
LOCALE LOAD name
2.1 - Parameter
name
A character string that identifies the locale to be loaded.
This can be one of the following:
o The name of the public locale
The format of the name is:
language_country.codeset[@modifier]
LOCALE LOAD searches for the public locale binary file in
the location defined by the logical name SYS$I18N_LOCALE.
The file type defaults to .LOCALE. The period (.) and
at-sign (@) characters in the name specified are replaced by
an underscore character (_).
o A file specification
Specifies the binary locale file. This can be any valid
file specification. If either the device or directory is
not specified, LOCALE LOAD first applies the current
caller's device and directory as defaults. If the file is
not found, the device and directory defined by the
SYS$I18N_LOCALE logical name are used as defaults. The file
type defaults to .LOCALE.
Wildcards are not allowed. The binary locale file cannot
reside on a remote node.
| 3 - SHOW |
Displays information about the locales and charmaps on the system.
Format:
LOCALE SHOW option
3.1 - CHARACTER_DEFINITIONS
Lists all the character set description files (charmaps) in the
public directory defined by the logical name SYS$I18N_LOCALE. A
charmap defines symbolic names and values of characters in a coded
character set. Charmaps are used by the LOCALE COMPILE command
when compiling a locale. A charmap file has the file type .CMAP.
Format:
LOCALE SHOW CHARACTER_DEFINITIONS
3.2 - CURRENT
Displays a summary of the current international environment, as
defined by several international environment logical names.
Format:
LOCALE SHOW CURRENT
3.3 - PUBLIC
Lists all public locales on the system. The set of public locales
contains all locales that reside in the directory defined by the
logical name SYS$I18N_LOCALE, as well as the system's built-in
locales supplied with the Compaq C run-time library.
Format:
LOCALE SHOW PUBLIC
3.4 - VALUE
Displays the value of one or more keywords from the current
international environment.
Format:
LOCALE SHOW VALUE name[,...]
3. 4.1 - Parameter
name[,...]
The name of a keyword or category. If you specify a keyword,
the value of that keyword in the current locale is displayed.
If you specify a category, the values of the keywords in that
category are displayed. For integer keywords that have no value
assigned, the value CHAR_MAX (127) is displayed. When a keyword
value includes semicolons, double-quotes, backslashes, or
control characters, they are preceded by an escape character
(usually a backslash).
3.5 - Qualifiers
3. 5.1 - /CATEGORY
/[NO]CATEGORY
/NOCATEGORY (D)
Displays the category name before each keyword. If /CATEGORY is
omitted, the category name is not displayed.
3. 5.2 - /KEYWORD
/[NO]KEYWORD
/NOKEYWORD (D)
Displays the keyword name before the value of a keyword. If
/KEYWORD is omitted, the value of the keyword is displayed, but
not its name.
| 4 - UNLOAD |
Unloads the specified locale name from the system's memory. If a
process is accessing the locale when the UNLOAD command is
entered, the global sections are deleted after the process
deaccesses the locale.
LOCALE UNLOAD is a privileged OpenVMS command, typically issued by
the system manager, and requiring the following privileges:
o SYSGBL
o PRMGBL
Only locale files loaded by the LOCALE LOAD command can be
unloaded.
Format:
LOCALE UNLOAD name
4.1 - Parameter
name
A character string that identifies the locale to be unloaded.
See the LOCALE LOAD command for acceptable formats for this
parameter.
|
|
