VMS Help LANCP, SHOW, NODE  *Conan The Librarian (sorry for the slow response - running on an old VAX)

    Displays information in the LAN volatile node database.

    Format

      SHOW NODE  node-name

1 - Parameter

 node-name

    Specifies the name of a node in the LAN volatile node database.
    The name can include up to 63 characters associated with the
    node address. If you do not specify a node name, all nodes are
    displayed.

2 - Qualifiers

 2.1 - /ALL

    Displays information for all nodes in the LAN volatile node
    database. If you specify a node name, all matching nodes are
    selected; for example, A/ALL selects all nodes beginning with A.

 2.2 - /OUTPUT

       /OUTPUT=file-name

    Creates the specified file and directs output to that file. If
    the file extension is .com, the output is in the form of a list
    of DEFINE NODE or SET NODE commands. The resulting command file
    can be used to create the LAN node databases.

 2.3 - /TOTAL

    Display counter totals only, for the nodes selected.

3 - Examples

    1.LANCP> SHOW NODE

      Node Listing:

      GALAXY (08-00-2B-2C-51-28):
       MOP DLL: Load file: APB.EXE
                Load root: $64$DIA24:<SYS11.>
                Boot type: Alpha satellite

      ZAPNOT (08-00-2B-18-7E-33):
       MOP DLL: Load file: NISCS_LOAD.EXE
                Load root: LAVC$SYSDEVICE:<SYS10.>
                Boot type: VAX satellite

      CALPAL (08-00-2B-08-9F-4C):
       MOP DLL: Load file: READ_ADDR.SYS
                Last file: LAN$DLL:APB_X5WN.SYS
                Boot type: Other
                2 loads requested, 1 volunteered
                1 succeeded, 0 failed
                Last request was for a system image, in MOP V4 format
                Last load initiated 10-JUN-1998 09:11:17
                    on EXA0 for 00:00:06.65
                527665 bytes, 4161 packets, 0 transmit failures

      Unnamed (00-00-00-00-00-00):

      Totals:
        Requests received    2
        Requests volunteered 1
        Successful loads     1
        Failed loads         0
        Packets sent         2080
        Packets received     2081
        Bytes sent           523481
        Bytes received       4184
        Last load            CALPAL at 10-JUN-1998 09:11:17.29

      This example shows output from a command issued on a local node
      on which there are three nodes defined (GALAXY, ZAPNOT, and
      CALPAL). CALPAL has issued two load requests:

      o  The first request is the multicast request from CALPAL that
         the local node volunteered to accept.

      o  The second request is the load request sent directly to the
         local node by CALPAL for the actual load data. The elapsed
         time from the second load request to completion of the load
         was 6.65 seconds.

    2.LANCP> SHOW NODE VAXSYS

      Displays node characteristics and counters information from the
      LAN volatile node database for node VAXSYS.

    3.LANCP> SHOW NODE/ALL VAX

      Displays node characteristics and counters information from the
      LAN volatile node database for all nodes whose name begins with
      VAX.

    4.LANCP> SHOW NODE/ALL

      Displays node characteristics and counters information from the
      LAN volatile node database for all nodes.

    5.LANCP> SHOW NODE/ALL/OUTPUT=TMP.INI

      Writes a list of all nodes to the file TMP.INI.