VMS Help LANCP, SHOW, CONFIGURATION  *Conan The Librarian (sorry for the slow response - running on an old VAX)

    Displays a list of LAN devices and characteristics on the system.

    Format

      SHOW CONFIGURATION

1 - Parameters

    None.

2 - Qualifiers

 2.1 - /OUTPUT

       /OUTPUT=file-name

    Creates the specified file and directs output to it.

 2.2 - /USERS

    On Alpha systems, shows which protocols are using which template
    device.

3 - Example

  LANCP> SHOW CONFIGURATION
  LAN Configuration:
     Device   Medium      Default LAN Address   Version
     ------   ------      -------------------   -------
      EWA0    CSMA/CD      08-00-2B-E4-00-BF    02000023
      EWB0    CSMA/CD      08-00-2B-92-A4-0D    02000023
      IRA0    Token Ring   00-00-93-58-5D-32    20000223

      This example shows the output from a SHOW CONFIGURATION command
      that was entered on a node that has three LAN devices, two
      DE435s, and a DETRA.

      The version is the device-specific representation of the
      actual (hardware or firmware) version. In this example, for
      two devices on the PCI bus, the actual version is in the low
      byte (2.3 for the DE435 adapters). A device that does not have
      a readable version is shown as version zero.

      Consult your device-specific documentation to correlate
      the version returned with a particular hardware or firmware
      implementation of the device.