VMS Help LANCP, LIST, DEVICE  *Conan The Librarian (sorry for the slow response - running on an old VAX)

    Displays information in the LAN permanent device database.

    Format

      LIST DEVICE  device-name

1 - Parameter

 device-name

    Supplies the LAN controller device name. The device name has
    the form ddcu where dd is the device code, c is the controller
    designation, and u is the unit number. LAN devices are specified
    as the name of the template device which is unit 0. For example,
    the first DE435 Ethernet device is specified as EWA0, the second
    as EWB0.

    For example, you can specify a DEMNA controller as EXA, EXA0,
    or EXA0:. This refers to the LAN template device, for which is
    maintained most of the device parameters and counters. Also, the
    device name can refer to a device unit representing an actual
    user or protocol. For example, the cluster protocol can be
    started on a device as EWA1. You can specify a device unit to
    view unit-specific parameter information.

    If you do not specify a device name, all devices are displayed.

    If you specify a device name, all matching LAN devices are
    displayed, for example: E to select all Ethernet devices, F
    for FDDI, I for Token Ring, EW to select all Ethernet PCI Tulip
    devices.

                                   NOTE

       If you do not specify a qualifier, the utility displays the
       matching devices without additional information.

2 - Qualifiers

 2.1 - /ALL

    Lists all devices in the LAN permanent device database.

 2.2 - /CHARACTERISTICS

    On Alpha systems, lists status and related information about the
    device. It is the same as /PARAMETERS qualifier.

 2.3 - /DLL

    Displays MOP downline load characteristics.

 2.4 - /MAP

    Lists the current configuration of the functional address mapping
    table.

 2.5 - /MOPDLL

    Same as /DLL qualifier.

 2.6 - /OUTPUT

       /OUTPUT=file name

    Creates the specified file and directs output to it.

 2.7 - /PARAMETERS

    On Alpha systems, lists status and related information about the
    device.

 2.8 - /SR_ENTRY

    On Alpha systems, lists the contents of the current source
    routing cache table.

3 - Examples

    1.LANCP> LIST DEVICE/MOPDLL

      Device Listing, permanent  database:
                    --- MOP Downline Load Service Characteristics ---
         Device     State   Access Mode      Clients           Data Size
         ------     -----   -----------      -------           ---------
         EXA0      Enabled  Exclusive    KnownClientsOnly      1400 bytes
         FXA0      Disabled NoExclusive  NoKnownClientsOnly     246 bytes

      This command displays MOP downline load information in the LAN
      permanent device database for all known devices.

    2.LANCP> LIST DEVICE/MOPDLL EXA0

      Device Listing, permanent database:
                    --- MOP Downline Load Service Characteristics ---
         Device     State   Access Mode      Clients           Data Size
         ------     -----   -----------      -------           ---------
         EXA0      Enabled  Exclusive    KnownClientsOnly      1400 bytes

      This command displays MOP downline load information in the LAN
      permanent device database for device EXA0.